incubator-nuttx/arch/arm/include/kl/chip.h

181 lines
9.7 KiB
C

/****************************************************************************
* arch/arm/include/kl/chip.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __ARCH_ARM_INCLUDE_KL_CHIP_H
#define __ARCH_ARM_INCLUDE_KL_CHIP_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
/****************************************************************************
* Pre-processor Prototypes
****************************************************************************/
/* Get customizations for each supported chip */
#if defined(CONFIG_ARCH_CHIP_MKL25Z64)
# define KL_Z64 1 /* Kinetis KL25Z128 family */
# define KL_FLASH_SIZE (64*1024) /* 64Kb */
# define KL_SRAM_SIZE (8*1024) /* 8Kb */
# undef KL_MPU /* No memory protection unit */
# undef KL_EXTBUS /* No external bus interface */
# define KL_NDMACH 4 /* Up to 4 DMA channels */
# undef KL_NENET /* No Ethernet controller */
# define KL_NUSBHOST 1 /* One USB host controller */
# define KL_NUSBOTG 1 /* With USB OTG controller */
# define KL_NUSBDEV 1 /* One USB device controller */
# undef KL_NSDHC /* No SD host controller */
# define KL_NTOUCHIF 1 /* Xtrinsic touch sensing interface */
# define KL_NI2C 2 /* Two I2C modules */
# define KL_NUART 3 /* Three UARTs */
# define KL_NSPI 2 /* Two SPI modules */
# undef KL_NCAN /* No CAN in 64-pin chips */
# define KL_NI2S 1 /* One I2S module */
# undef KL_NSLCD /* One segment LCD interface (up to 25x8/29x4) */
# define KL_NADC16 1 /* One 16-bit ADC */
# undef KL_NADC12 /* No 12-channel ADC */
# undef KL_NADC13 /* No 13-channel ADC */
# undef KL_NADC15 /* No 15-channel ADC */
# undef KL_NADC18 /* No 18-channel ADC */
# undef KL_NPGA /* No Programmable Gain Amplifiers */
# define KL_NCMP 1 /* One analog comparator */
# define KL_NDAC6 1 /* Three 6-bit DAC */
# define KL_NDAC12 1 /* Two 12-bit DAC */
# define KL_NVREF 1 /* Voltage reference */
# define KL_NTIMERS6 1 /* One 6 channel timer */
# define KL_NTIMERS2 2 /* Two 2 channel timers */
# undef KL_NRNG /* No random number generator */
# define KL_NRTC 1 /* Real time clock */
# undef KL_NMMCAU /* No hardware encryption */
# undef KL_NTAMPER /* No tamper detect */
# undef KL_NCRC /* No CRC */
#elif defined(CONFIG_ARCH_CHIP_MKL25Z128)
# define KL_Z128 1 /* Kinetis KL25Z128 family */
# define KL_FLASH_SIZE (128*1024) /* 64Kb */
# define KL_SRAM_SIZE (16*1024) /* 16Kb */
# undef KL_MPU /* No memory protection unit */
# undef KL_EXTBUS /* No external bus interface */
# define KL_NDMACH 4 /* Up to 4 DMA channels */
# undef KL_NENET /* No Ethernet controller */
# define KL_NUSBHOST 1 /* One USB host controller */
# define KL_NUSBOTG 1 /* With USB OTG controller */
# define KL_NUSBDEV 1 /* One USB device controller */
# undef KL_NSDHC /* No SD host controller */
# define KL_NTOUCHIF 1 /* Xtrinsic touch sensing interface */
# define KL_NI2C 2 /* Two I2C modules */
# define KL_NUART 3 /* Three UARTs */
# define KL_NSPI 2 /* Two SPI modules */
# undef KL_NCAN /* No CAN in 64-pin chips */
# define KL_NI2S 1 /* One I2S module */
# undef KL_NSLCD /* One segment LCD interface (up to 25x8/29x4) */
# define KL_NADC16 1 /* One 16-bit ADC */
# undef KL_NADC12 /* No 12-channel ADC */
# undef KL_NADC13 /* No 13-channel ADC */
# undef KL_NADC15 /* No 15-channel ADC */
# undef KL_NADC18 /* No 18-channel ADC */
# undef KL_NPGA /* No Programmable Gain Amplifiers */
# define KL_NCMP 1 /* One analog comparator */
# define KL_NDAC6 1 /* Three 6-bit DAC */
# define KL_NDAC12 1 /* Two 12-bit DAC */
# define KL_NVREF 1 /* Voltage reference */
# define KL_NTIMERS8 1 /* One 8 channel timers */
# undef KL_NTIMERS12 /* No 12 channel timers */
# undef KL_NTIMERS20 /* No 20 channel timers */
# undef KL_NRNG /* No random number generator */
# define KL_NRTC 1 /* Real time clock */
# undef KL_NMMCAU /* No hardware encryption */
# undef KL_NTAMPER /* No tamper detect */
# undef KL_NCRC /* No CRC */
#elif defined(CONFIG_ARCH_CHIP_MKL26Z128)
# define KL_Z128 1 /* Kinetis KL25Z128 family */
# define KL_FLASH_SIZE (128*1024) /* 64Kb */
# define KL_SRAM_SIZE (16*1024) /* 16Kb */
# undef KL_MPU /* No memory protection unit */
# undef KL_EXTBUS /* No external bus interface */
# define KL_NDMACH 4 /* Up to 4 DMA channels */
# undef KL_NENET /* No Ethernet controller */
# define KL_NUSBHOST 1 /* One USB host controller */
# define KL_NUSBOTG 1 /* With USB OTG controller */
# define KL_NUSBDEV 1 /* One USB device controller */
# undef KL_NSDHC /* No SD host controller */
# define KL_NTOUCHIF 1 /* Xtrinsic touch sensing interface */
# define KL_NI2C 2 /* Two I2C modules */
# define KL_NUART 3 /* Three UARTs */
# define KL_NSPI 2 /* Two SPI modules */
# undef KL_NCAN /* No CAN in 64-pin chips */
# define KL_NI2S 1 /* One I2S module */
# undef KL_NSLCD /* One segment LCD interface (up to 25x8/29x4) */
# define KL_NADC16 1 /* One 16-bit ADC */
# undef KL_NADC12 /* No 12-channel ADC */
# undef KL_NADC13 /* No 13-channel ADC */
# undef KL_NADC15 /* No 15-channel ADC */
# undef KL_NADC18 /* No 18-channel ADC */
# undef KL_NPGA /* No Programmable Gain Amplifiers */
# define KL_NCMP 1 /* One analog comparator */
# define KL_NDAC6 1 /* Three 6-bit DAC */
# define KL_NDAC12 1 /* Two 12-bit DAC */
# define KL_NVREF 1 /* Voltage reference */
# define KL_NTIMERS8 1 /* One 8 channel timers */
# undef KL_NTIMERS12 /* No 12 channel timers */
# undef KL_NTIMERS20 /* No 20 channel timers */
# undef KL_NRNG /* No random number generator */
# define KL_NRTC 1 /* Real time clock */
# undef KL_NMMCAU /* No hardware encryption */
# undef KL_NTAMPER /* No tamper detect */
# undef KL_NCRC /* No CRC */
#else
# error "Unsupported Kinetis chip"
#endif
/* NVIC priority levels *****************************************************/
/* Each priority field holds a priority value, 0-15. The lower the value, the
* greater the priority of the corresponding interrupt. The processor
* implements only bits[7:6] of each field, bits[5:0] read as zero and ignore
* writes.
*/
#define NVIC_SYSH_PRIORITY_MIN 0xc0 /* All bits[7:6] set is minimum priority */
#define NVIC_SYSH_PRIORITY_DEFAULT 0x80 /* Midpoint is the default */
#define NVIC_SYSH_PRIORITY_MAX 0x00 /* Zero is maximum priority */
#define NVIC_SYSH_PRIORITY_STEP 0x40 /* Steps between supported priority values */
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Functions Prototypes
****************************************************************************/
#endif /* __ARCH_ARM_INCLUDE_KL_CHIP_H */