incubator-nuttx/include/nuttx/mtd/nand_model.h

380 lines
12 KiB
C

/****************************************************************************
* include/nuttx/mtd/nand_model.h
*
* SPDX-License-Identifier: BSD-3-Clause
* SPDX-FileCopyrightText: 2012, Atmel Corporation
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the names NuttX nor Atmel nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_MTD_NAND_MODEL_H
#define __INCLUDE_NUTTX_MTD_NAND_MODEL_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Number of NAND FLASH models inside the model list */
#define NAND_NMODELS 60
/* Bit definitions for the NAND model options field */
#define NANDMODEL_DATAWIDTH8 (0 << 0) /* NAND uses an 8-bit databus */
#define NANDMODEL_DATAWIDTH16 (1 << 0) /* NAND uses a 16-bit databus */
#define NANDMODEL_COPYBACK (1 << 1) /* NAND supports the copy-back function
* (internal page-to-page copy) */
/****************************************************************************
* Public Types
****************************************************************************/
/* Describes a particular model of NAND FLASH device. */
struct nand_model_s
{
uint8_t devid; /* Identifier for the device */
uint8_t options; /* Special options for the NandFlash */
uint16_t pagesize; /* Size of the data area of a page in bytes */
uint16_t sparesize; /* Size of the spare area of a page in bytes */
uint16_t devsize; /* Size of the device in MB */
uint16_t blocksize; /* Size of one block in kilobytes */
/* Spare area placement scheme */
FAR const struct nand_scheme_s *scheme;
};
/****************************************************************************
* Public Data
****************************************************************************/
#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/* List of NandFlash models which can be recognized by the software */
EXTERN const struct nand_model_s g_nandmodels[NAND_NMODELS];
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: nandmodel_find
*
* Description:
* Looks for a nand_model_s corresponding to the given ID inside a list of
* model. If found, the model variable is filled with the correct values.
*
* Input Parameters:
* modeltab List of nand_model_s instances.
* size Number of models in list.
* chipid Identifier returned by the
* Nand(id1|(id2<<8)|(id3<<16)|(id4<<24)).
* model nand_model_s instance to update with the model parameters.
*
* Returned Value:
* OK is returned on success; -ENODEV is returned on failure.
*
****************************************************************************/
int nandmodel_find(FAR const struct nand_model_s *modeltab, size_t size,
uint32_t chipid, FAR struct nand_model_s *model);
/****************************************************************************
* Name: nandmodel_translate
*
* Description:
* Translates address/size access of a nand_model_s to block, page and
* offset values. The values are stored in the provided variables if their
* pointer is not 0.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
* address Access address.
* size Access size in bytes.
* block Stores the first accessed block number.
* page Stores the first accessed page number inside the first block.
* offset Stores the byte offset inside the first accessed page.
*
* Returned Value:
* OK on success; -ESPIPE on failure.
*
****************************************************************************/
int nandmodel_translate(FAR const struct nand_model_s *model, off_t address,
size_t size, FAR off_t *block, FAR off_t *page,
FAR off_t *offset);
/****************************************************************************
* Name: nandmodel_getscheme
*
* Description:
* Returns the spare area placement scheme used by a particular nandflash
* model.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* Spare placement scheme
*
****************************************************************************/
#define nandmodel_getscheme(m) ((m)->scheme)
/****************************************************************************
* Name: nandmodel_getdevid
*
* Description:
* Returns the device ID of a particular NAND FLASH model.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* Device ID
*
****************************************************************************/
#define nandmodel_getdevid(m) ((m)->devid)
/****************************************************************************
* Name: nandmodel_getdevblocks
*
* Description:
* Returns the number of blocks in the entire device.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* Number of blocks in the device
*
****************************************************************************/
#define nandmodel_getdevblocks(m) \
((off_t)((m)->devsize << 10) / (m)->blocksize)
/****************************************************************************
* Name: nandmodel_getdevbytesize
*
* Description:
* Returns the size of the whole device in bytes (this does not include
* the size of the spare zones).
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* Size of the device in bytes
*
****************************************************************************/
#define nandmodel_getdevbytesize(m) (((uint64_t)((m)->devsize) << 20))
/****************************************************************************
* Name: nandmodel_getdevmbsize
*
* Description:
* Returns the size of the whole device in Mega bytes (this does not
* include the size of the spare zones).
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* size of the device in MB.
*
****************************************************************************/
#define nandmodel_getdevmbsize(m) ((uint32_t)((m)->devsize))
/****************************************************************************
* Name: nandmodel_pagesperblock
*
* Description:
* Returns the number of pages in one single block of a device.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* Block size in pages
*
****************************************************************************/
#define nandmodel_pagesperblock(m) \
((uint32_t)((m)->blocksize << 10) / (m)->pagesize)
/****************************************************************************
* Name: nandmodel_getdevpagesize
*
* Description:
* Returns the number of pages in the entire device.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* Number of pages in the device
*
****************************************************************************/
#define nandmodel_getdevpagesize(m) \
((uint32_t)nandmodel_getdevblocks(m) * nandmodel_pagesperblock(m))
/****************************************************************************
* Name: nandmodel_getbyteblocksize
*
* Description:
* Returns the size in bytes of one single block of a device. This does not
* take into account the spare zones size.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* Block size in bytes
*
****************************************************************************/
#define nandmodel_getbyteblocksize(m) ((unsigned int)(m)->blocksize << 10)
/****************************************************************************
* Name: nandmodel_getpagesize
*
* Description:
* Returns the size of the data area of a page in bytes.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* Size of data area in bytes
*
****************************************************************************/
#define nandmodel_getpagesize(m) ((m)->pagesize)
/****************************************************************************
* Name: nandmodel_getsparesize
*
* Description:
* Returns the size of the spare area of a page in bytes.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* size of spare area in bytes
*
****************************************************************************/
unsigned int nandmodel_getsparesize(FAR const struct nand_model_s *model);
/****************************************************************************
* Name: nandmodel_getbuswidth
*
* Description:
* Returns the number of bits used by the data bus of a NAND FLASH device.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* data width
*
****************************************************************************/
#define nandmodel_getbuswidth(m) \
(((m)->options & NANDMODEL_DATAWIDTH16) ? 16 : 8)
/****************************************************************************
* Name: nandmodel_havesmallblocks
*
* Description:
* Returns true if the given NAND FLASH model uses the "small blocks/pages"
* command set; otherwise returns false.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* Returns true if the given NAND FLASH model uses the "small blocks/pages"
* command set; otherwise returns false.
*
****************************************************************************/
#define nandmodel_havesmallblocks(m) ((m)->pagesize <= 512)
/****************************************************************************
* Name: nandmodel_havecopyback
*
* Description:
* Returns true if the device supports the copy-back operation. Otherwise
* returns false.
*
* Input Parameters:
* model Pointer to a nand_model_s instance.
*
* Returned Value:
* Returns true if the device supports the copy-back operation. Otherwise
* returns false.
*
****************************************************************************/
#define nandmodel_havecopyback(m) (((m)->options & NANDMODEL_COPYBACK) != 0)
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __INCLUDE_NUTTX_MTD_NAND_MODEL_H */