OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/fs/mount/fs_automount.c

638 lines
18 KiB
C
Raw Blame History

/****************************************************************************
* fs/mount/fs_automount.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_FS_AUTOMOUNTER_DEBUG) && !defined(CONFIG_DEBUG_FS)
# define CONFIG_DEBUG_FS 1
#endif
#include <sys/mount.h>
#include <stdbool.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/wdog.h>
#include <nuttx/kmalloc.h>
#include <nuttx/wqueue.h>
#include <nuttx/fs/automount.h>
#include "inode/inode.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************
*
* CONFIG_FS_AUTOMOUNTER - Enables AUTOMOUNT support
*/
/* Pre-requisites */
#ifndef CONFIG_SCHED_WORKQUEUE
# error Work queue support is required (CONFIG_SCHED_WORKQUEUE)
#endif
/* Return Values */
#define OK_EXIST 0
#define OK_NOENT 1
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure describes the state of the automounter */
struct automounter_state_s
{
FAR const struct automount_lower_s *lower; /* Board level interfaces */
struct work_s work; /* Work queue support */
WDOG_ID wdog; /* Delay to retry un-mounts */
bool mounted; /* True: Volume has been mounted */
bool inserted; /* True: Media has been inserted */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int automount_findinode(FAR const char *path);
static void automount_mount(FAR struct automounter_state_s *priv);
static int automount_unmount(FAR struct automounter_state_s *priv);
static void automount_timeout(int argc, uint32_t arg1, ...);
static void automount_worker(FAR void *arg);
static int automount_interrupt(FAR const struct automount_lower_s *lower,
FAR void *arg, bool inserted);
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: automount_findinode
*
* Description:
* Find the mountpoint inode in the inode tree.
*
* Input Parameters:
* mntpath - Mountpoint path
*
* Returned Value:
* OK_EXIST if the inode exists
* OK_NOENT if the indoe does not exist
* Negated errno if some failure occurs
*
****************************************************************************/
static int automount_findinode(FAR const char *path)
{
FAR struct inode *node;
FAR const char *srchpath;
FAR const char *relpath;
int ret;
/* Make sure that we were given an absolute path */
DEBUGASSERT(path && path[0] == '/');
/* Get exclusive access to the in-memory inode tree. */
inode_semtake();
/* Find the inode */
srchpath = path;
node = inode_search(&srchpath, (FAR struct inode**)NULL,
(FAR struct inode**)NULL, &relpath);
/* Did we find it? */
if (!node)
{
/* No.. Not found */
ret = OK_NOENT;
}
/* Yes.. is it a mount point? */
else if (INODE_IS_MOUNTPT(node))
{
/* Yes.. we found a mountpoint at this path */
ret = OK_EXIST;
}
else
{
/* No.. then somethin is in the way */
ret = -ENOTDIR;
}
/* Relinquish our exclusive access to the inode try and return the result */
inode_semgive();
return ret;
}
/****************************************************************************
* Name: automount_mount
*
* Description:
* Media has been inserted, mount the volume.
*
* Input Parameters:
* priv - A reference to out private state structure
*
* Returned Value:
* None
*
****************************************************************************/
static void automount_mount(FAR struct automounter_state_s *priv)
{
FAR const struct automount_lower_s *lower = priv->lower;
int ret;
fvdbg("Mounting %s\n", lower->mountpoint);
/* Check if the something is already mounted at the mountpoint. */
ret = automount_findinode(lower->mountpoint);
switch (ret)
{
case OK_EXIST:
/* REVISIT: What should we do in this case? I think that this would
* happen only if a previous unmount failed? I suppose that we should
* try to unmount again because the mount might be stale.
*/
fdbg("WARNING: Mountpoint %s already exists\n", lower->mountpoint);
ret = automount_unmount(priv);
if (ret < 0)
{
/* We failed to unmount (again?). Complain and abort. */
fdbg("ERROR: automount_unmount failed: %d\n", ret);
return;
}
/* We successfully unmounted the file system. Fall through to
* mount it again.
*/
case OK_NOENT:
/* If we get here, then the volume must not be mounted */
DEBUGASSERT(!priv->mounted);
/* Mount the file system */
ret = mount(lower->blockdev, lower->mountpoint, lower->fstype,
0, NULL);
if (ret < 0)
{
int errcode = get_errno();
DEBUGASSERT(errcode > 0);
fdbg("ERROR: Mount failed: %d\n", errcode);
UNUSED(errcode);
return;
}
/* Indicate that the volume is mounted */
priv->mounted = true;
break;
default:
fdbg("ERROR: automount_findinode failed: %d\n", ret);
break;
}
}
/****************************************************************************
* Name: automount_unmount
*
* Description:
* Media has been removed, unmount the volume.
*
* Input Parameters:
* priv - A reference to out private state structure
*
* Returned Value:
* OK if the volume was successfully mounted. A negated errno value
* otherwise.
*
****************************************************************************/
static int automount_unmount(FAR struct automounter_state_s *priv)
{
FAR const struct automount_lower_s *lower = priv->lower;
int ret;
fvdbg("Unmounting %s\n", lower->mountpoint);
/* Check if the something is already mounted at the mountpoint. */
ret = automount_findinode(lower->mountpoint);
switch (ret)
{
case OK_EXIST:
/* If we get here, then the volume must be mounted */
DEBUGASSERT(priv->mounted);
/* Un-mount the volume */
ret = umount2(lower->mountpoint, MNT_FORCE);
if (ret < 0)
{
int errcode = get_errno();
DEBUGASSERT(errcode > 0);
/* We expect the error to be EBUSY meaning that the volume could
* not be unmounted because there are currently reference via open
* files or directories.
*/
if (errcode == EBUSY)
{
fvdbg("WARNING: Volume is busy, try again later\n");
/* Start a timer to retry the umount2 after a delay */
ret = wd_start(priv->wdog, lower->udelay, automount_timeout, 1,
(uint32_t)((uintptr_t)priv));
if (ret < 0)
{
errcode = get_errno();
DEBUGASSERT(errcode > 0);
fdbg("ERROR: wd_start failed: %d\n", errcode);
return -ret;
}
}
/* Other errors are fatal */
else
{
fvdbg("ERROR: umount2 failed: %d\n", errcode);
return -errcode;
}
}
/* Fall through */
case OK_NOENT:
/* The mountpoint is not present. This is normal behavior in the
* case where the user manually un-mounted the volume before removing
* media. Nice job, Mr. user.
*/
priv->mounted = false;
return OK;
default:
fdbg("ERROR: automount_findinode failed: %d\n", ret);
return ret;
}
}
/****************************************************************************
* Name: automount_timeout
*
* Description:
* A previous unmount failed because the volume was busy... busy meaning
* the volume could not be unmounted because there are open references
* the files or directories in the volume. When this failure occurred,
* the unmount logic setup a delay and this function is called as a result
* of that delay timeout.
*
* This function will attempt the unmount again.
*
* Input Parameters:
* Standard wdog timeout parameters
*
* Returned Value:
* None
*
****************************************************************************/
static void automount_timeout(int argc, uint32_t arg1, ...)
{
FAR struct automounter_state_s *priv =
(FAR struct automounter_state_s *)((uintptr_t)arg1);
int ret;
fllvdbg("Timeout!\n");
DEBUGASSERT(argc == 1 && priv);
/* Check the state of things. This timeout at the interrupt level and
* will cancel the timeout if there is any change in the insertion
* state. So we should still have the saved state as NOT inserted and
* there should be no pending work.
*/
fllvdbg("inserted=%d\n", priv->inserted);
DEBUGASSERT(!priv->inserted && work_available(&priv->work));
/* Queue work to occur immediately. */
ret = work_queue(LPWORK, &priv->work, automount_worker, priv, 0);
if (ret < 0)
{
/* NOTE: Currently, work_queue only returns success */
fdbg("ERROR: Failed to schedule work: %d\n", ret);
}
}
/****************************************************************************
* Name: automount_worker
*
* Description:
* Performs auto-mount actions on the worker thread.
*
* Input Parameters:
* arg - Work argument set by work_queue()
*
* Returned Value:
* None
*
****************************************************************************/
static void automount_worker(FAR void *arg)
{
FAR struct automounter_state_s *priv = (FAR struct automounter_state_s *)arg;
FAR const struct automount_lower_s *lower;
DEBUGASSERT(priv && priv->lower);
lower = priv->lower;
/* Disable interrupts. We are commit now and everything must remain
* stable.
*/
AUTOMOUNT_DISABLE(lower);
/* Are we mounting or unmounting? */
if (priv->inserted)
{
/* We are mounting */
automount_mount(priv);
}
else
{
/* We are unmounting */
(void)automount_unmount(priv);
}
/* Re-enable interrupts */
AUTOMOUNT_ENABLE(lower);
}
/****************************************************************************
* Name: automount_interrupt
*
* Description:
* Called (probably from the interrupt level) when a media change event
* has been detected.
*
* Input Parameters:
* lower - Persistent board configuration data
* arg - Data associated with the auto-mounter
* inserted - True: Media has been inserted. False: media has been removed
*
* Returned Value:
* OK is returned on success; a negated errno value is returned on failure.
*
* Assumptions:
* Interrupts are disabled so that there is no race condition with the
* timer expiry.
*
****************************************************************************/
static int automount_interrupt(FAR const struct automount_lower_s *lower,
FAR void *arg, bool inserted)
{
FAR struct automounter_state_s *priv = (FAR struct automounter_state_s *)arg;
int ret;
DEBUGASSERT(lower && priv && priv->lower == lower);
fllvdbg("inserted=%d\n", inserted);
/* Cancel any pending work. We could get called multiple times if, for
* example there is bounce in the detection mechanism. Work is performed
* the low priority work queue if it is available.
*/
ret = work_cancel(LPWORK, &priv->work);
if (ret < 0)
{
/* NOTE: Currently, work_cancel only returns success */
fdbg("ERROR: Failed to cancel work: %d\n", ret);
}
/* Set the media insertion/removal state */
priv->inserted = inserted;
/* Queue work to occur after a delay. The delays performs debouncing:
* If the insertion/removal detection logic has "chatter", then we may
* receive this interrupt numerous times. Each time, the previous work
* will be cancelled (above) and the new work will scheduled with the
* delay. So the final mount operation will not be performed until the
* insertion state is stable for that delay.
*/
ret = work_queue(LPWORK, &priv->work, automount_worker, priv,
priv->lower->ddelay);
if (ret < 0)
{
/* NOTE: Currently, work_queue only returns success */
fdbg("ERROR: Failed to schedule work: %d\n", ret);
}
else
{
/* Cancel any retry delays */
(void)wd_cancel(priv->wdog);
}
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: automount_initialize
*
* Description:
* Configure the auto mounter.
*
* Input Parameters:
* lower - Persistent board configuration data
*
* Returned Value:
* A void* handle. The only use for this handle is with automount_uninitialize().
* NULL is returned on any failure.
*
****************************************************************************/
FAR void *automount_initialize(FAR const struct automount_lower_s *lower)
{
FAR struct automounter_state_s *priv;
int ret;
fvdbg("lower=%p\n", lower);
DEBUGASSERT(lower);
/* Allocate an auto-mounter state structure */
priv = (FAR struct automounter_state_s *)
kmm_zalloc(sizeof(struct automounter_state_s));
if (!priv)
{
fdbg("ERROR: Failed to allocate state structure\n");
return NULL;
}
/* Initialize the automounter state structure */
priv->lower = lower;
/* Get a timer to handle unmount retries */
priv->wdog = wd_create();
if (!priv->wdog)
{
fdbg("ERROR: Failed to create a timer\n");
automount_uninitialize(priv);
return NULL;
}
/* Handle the initial state of the mount on the caller's thread */
priv->inserted = AUTOMOUNT_INSERTED(lower);
/* Set up the first action at a delay from the initialization time (to
* allow time for any extended block driver initialization to complete.
*/
ret = work_queue(LPWORK, &priv->work, automount_worker, priv,
priv->lower->ddelay);
if (ret < 0)
{
/* NOTE: Currently, work_queue only returns success */
fdbg("ERROR: Failed to schedule work: %d\n", ret);
}
/* Attach and enable automounter interrupts */
ret = AUTOMOUNT_ATTACH(lower, automount_interrupt, priv);
if (ret < 0)
{
fdbg("ERROR: Failed to attach automount interrupt: %d\n", ret);
automount_uninitialize(priv);
return NULL;
}
AUTOMOUNT_ENABLE(lower);
return priv;
}
/****************************************************************************
* Name: automount_uninitialize
*
* Description:
* Stop the automounter and free resources that it used. NOTE that the
* mount is left in its last state mounted/unmounted state.
*
* Input Parameters:
* handle - The value previously returned by automount_initialize();
*
* Returned Value:
* None
*
****************************************************************************/
void automount_uninitialize(FAR void *handle)
{
FAR struct automounter_state_s *priv = (FAR struct automounter_state_s *)handle;
FAR const struct automount_lower_s *lower;
DEBUGASSERT(priv && priv->lower);
lower = priv->lower;
/* Disable and detach interrupts */
AUTOMOUNT_DISABLE(lower);
(void)AUTOMOUNT_DETACH(lower);
/* Release resources */
(void)wd_delete(priv->wdog);
/* And free the state structure */
kmm_free(priv);
}
Reference in New Issue View Git Blame Copy Permalink