224 lines
7.7 KiB
C
224 lines
7.7 KiB
C
/****************************************************************************
|
|
* net/icmpv6/icmpv6_solicit.c
|
|
*
|
|
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
#include <debug.h>
|
|
|
|
#include <nuttx/net/net.h>
|
|
#include <nuttx/net/netdev.h>
|
|
#include <nuttx/net/netstats.h>
|
|
|
|
#include "devif/devif.h"
|
|
#include "utils/utils.h"
|
|
#include "icmpv6/icmpv6.h"
|
|
|
|
#ifdef CONFIG_NET_ICMPv6
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
#define ETHBUF ((struct eth_hdr_s *)&dev->d_buf[0])
|
|
#define ICMPv6BUF ((struct icmpv6_iphdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev)])
|
|
#define ICMPv6SOLICIT \
|
|
((struct icmpv6_neighbor_solicit_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv6_HDRLEN])
|
|
|
|
/****************************************************************************
|
|
* Private Data
|
|
****************************************************************************/
|
|
/* First 6 swords of the multi-cast address in network byte order */
|
|
|
|
static const uint16_t g_icmpv_mcastaddr[6] =
|
|
{
|
|
HTONS(0xff02), HTONS(0x0000), HTONS(0x0000), HTONS(0x0000),
|
|
HTONS(0x0000), HTONS(0x0001)
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Public Functions
|
|
****************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: icmpv6_solicit
|
|
*
|
|
* Description:
|
|
* Set up to send an ICMPv6 Neighbor Solicitation message. This version
|
|
* is for a standalone solicitation. If formats:
|
|
*
|
|
* - The Ethernet header
|
|
* - The IPv6 header
|
|
* - The ICMPv6 Neighbor Solicitation Message
|
|
*
|
|
* Parameters:
|
|
* dev - Reference to an Ethernet device driver structure
|
|
* ipaddr - IP address of Neighbor to be solicited
|
|
*
|
|
* Return:
|
|
* None
|
|
*
|
|
****************************************************************************/
|
|
|
|
void icmpv6_solicit(FAR struct net_driver_s *dev,
|
|
FAR const net_ipv6addr_t ipaddr)
|
|
{
|
|
FAR struct icmpv6_iphdr_s *icmp;
|
|
FAR struct icmpv6_neighbor_solicit_s *sol;
|
|
FAR struct eth_hdr_s *eth;
|
|
|
|
/* Set up the IPv6 header (most is probably already in place) */
|
|
|
|
icmp = ICMPv6BUF;
|
|
icmp->vtc = 0x60; /* Version/traffic class (MS) */
|
|
icmp->tcf = 0; /* Traffic class (LS)/Flow label (MS) */
|
|
icmp->flow = 0; /* Flow label (LS) */
|
|
|
|
/* Length excludes the IPv6 header */
|
|
|
|
icmp->len[0] = (sizeof(struct icmpv6_neighbor_solicit_s) >> 8);
|
|
icmp->len[1] = (sizeof(struct icmpv6_neighbor_solicit_s) & 0xff);
|
|
|
|
icmp->proto = IP_PROTO_ICMP6; /* Next header */
|
|
icmp->ttl = 255; /* Hop limit */
|
|
|
|
/* Set the multicast destination IP address */
|
|
|
|
memcpy(icmp->destipaddr, g_icmpv_mcastaddr, 6*sizeof(uint16_t));
|
|
icmp->destipaddr[6] = ipaddr[6] | HTONS(0xff00);
|
|
icmp->destipaddr[7] = ipaddr[7];
|
|
|
|
/* Add out IPv6 address as the source address */
|
|
|
|
net_ipv6addr_copy(icmp->srcipaddr, dev->d_ipv6addr);
|
|
|
|
/* Set up the ICMPv6 Neighbor Solicitation message */
|
|
|
|
sol = ICMPv6SOLICIT;
|
|
sol->type = ICMPv6_NEIGHBOR_SOLICIT; /* Message type */
|
|
sol->code = 0; /* Message qualifier */
|
|
sol->flags[0] = 0; /* flags */
|
|
sol->flags[1] = 0;
|
|
sol->flags[2] = 0;
|
|
sol->flags[3] = 0;
|
|
|
|
/* Copy the target address into the Neighbor Solicitation message */
|
|
|
|
net_ipv6addr_copy(sol->tgtaddr, ipaddr);
|
|
|
|
/* Set up the options */
|
|
|
|
sol->opttype = ICMPv6_OPT_SRCLLADDR; /* Option type */
|
|
sol->optlen = 1; /* Option length = 1 octet */
|
|
|
|
/* Copy our link layer address into the message
|
|
* REVISIT: What if the link layer is not Ethernet?
|
|
*/
|
|
|
|
memcpy(sol->srclladdr, &dev->d_mac, IFHWADDRLEN);
|
|
|
|
/* Calculate the checksum over both the ICMP header and payload */
|
|
|
|
icmp->chksum = 0;
|
|
icmp->chksum = ~icmpv6_chksum(dev);
|
|
|
|
/* Set the size to the size of the IPv6 header and the payload size */
|
|
|
|
dev->d_len = IPv6_HDRLEN + sizeof(struct icmpv6_neighbor_solicit_s);
|
|
|
|
#ifdef CONFIG_NET_ETHERNET
|
|
#ifdef CONFIG_NET_MULTILINK
|
|
if (dev->d_lltype == NET_LL_ETHERNET)
|
|
#endif
|
|
{
|
|
/* Set the destination IPv6 multicast Ethernet address:
|
|
*
|
|
* For IPv6 multicast addresses, the Ethernet MAC is derived by
|
|
* the four low-order octets OR'ed with the MAC 33:33:00:00:00:00,
|
|
* so for example the IPv6 address FF02:DEAD:BEEF::1:3 would map
|
|
* to the Ethernet MAC address 33:33:00:01:00:03.
|
|
*
|
|
* NOTES: This appears correct for the ICMPv6 Router Solicitation
|
|
* Message, but the ICMPv6 Neighbor Solicitation message seems to
|
|
* use 33:33:ff:01:00:03.
|
|
*/
|
|
|
|
eth = ETHBUF;
|
|
eth->dest[0] = 0x33;
|
|
eth->dest[1] = 0x33;
|
|
eth->dest[2] = 0xff;
|
|
eth->dest[3] = ipaddr[6] >> 8;
|
|
eth->dest[4] = ipaddr[7] & 0xff;
|
|
eth->dest[5] = ipaddr[7] >> 8;
|
|
|
|
/* Move our source Ethernet addresses into the Ethernet header */
|
|
|
|
memcpy(eth->src, dev->d_mac.ether_addr_octet, ETHER_ADDR_LEN);
|
|
|
|
/* Set the IPv6 Ethernet type */
|
|
|
|
eth->type = HTONS(ETHTYPE_IP6);
|
|
#if 0
|
|
/* No additional neighbor lookup is required on this packet.
|
|
* REVISIT: It is inappropriate to set this bit if we get here
|
|
* via neighbor_out(); It is no necessary to set this bit if we
|
|
* get here via icmpv6_input(). Is it ever necessary?
|
|
*/
|
|
|
|
IFF_SET_NOARP(dev->d_flags);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
/* Add the size of the layer layer header to the total size of the
|
|
* outgoing packet.
|
|
*/
|
|
dev->d_len += netdev_ipv6_hdrlen(dev);
|
|
nllvdbg("Outgoing ICMPv6 Neighbor Solicitation length: %d (%d)\n",
|
|
dev->d_len, (icmp->len[0] << 8) | icmp->len[1]);
|
|
|
|
#ifdef CONFIG_NET_STATISTICS
|
|
g_netstats.icmpv6.sent++;
|
|
g_netstats.ipv6.sent++;
|
|
#endif
|
|
}
|
|
|
|
#endif /* CONFIG_NET_ICMPv6 */
|