210 lines
7.5 KiB
ReStructuredText
210 lines
7.5 KiB
ReStructuredText
=============
|
|
Syscall Layer
|
|
=============
|
|
|
|
This page discusses supports a syscall layer from communication between a
|
|
monolithic, kernel-mode NuttX kernel and a separately built, user-mode
|
|
application set.
|
|
|
|
With most MCUs, NuttX is built as a flat, single executable image
|
|
containing the NuttX RTOS along with all application code. The RTOS code
|
|
and the application run in the same address space and at the same kernel-
|
|
mode privileges. In order to exploit security features of certain
|
|
processors, an alternative build model is also supported: NuttX can
|
|
be built separately as a monolithic, kernel-mode module and the applications
|
|
can be added as a separately built, user-mode module.
|
|
|
|
The syscall layer provided in this directory serves as the communication
|
|
layer from the user-mode application into the kernel-mode RTOS. The
|
|
switch from user-mode to kernel-mode is accomplished using software
|
|
interrupts (SWIs). SWIs are implemented differently and named differently
|
|
by different manufacturers but all work essentially the same: A special
|
|
instruction is executed in user-mode that causes a software generated
|
|
interrupt. The software generated interrupt is caught within the kernel
|
|
and handle in kernel-mode.
|
|
|
|
Header Files
|
|
------------
|
|
|
|
``include/syscall.h``
|
|
~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
This header file supports general access to SWI facilities. It is simply
|
|
a wrapper file that includes ``include/sys/syscall.h`` and
|
|
``include/arch/syscall.h``.
|
|
|
|
``include/sys/syscall.h``
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
The SWIs received by the kernel are distinguish by a code that identifies
|
|
how to process the SWI. This header file defines all such codes understood
|
|
by the NuttX kernel.
|
|
|
|
``include/arch/syscall.h`` (or ``arch/<cpu>/include/syscall.h``)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
This header file is provided by the platform-specific logic and declares
|
|
(or defines) the mechanism for providing software interrupts on this
|
|
platform. The following functions must be declared (or defined) in this
|
|
header file:
|
|
|
|
- ``SWI`` with ``SYS_`` call number only:
|
|
|
|
.. code-block:: C
|
|
|
|
uintptr_t sys_call0(unsigned int nbr);
|
|
|
|
- ``SWI`` with ``SYS_`` call number and one parameter:
|
|
|
|
.. code-block:: C
|
|
|
|
uintptr_t sys_call1(unsigned int nbr, uintptr_t parm1);
|
|
|
|
- ``SWI`` with ``SYS_`` call number and two parameters:
|
|
|
|
.. code-block:: C
|
|
|
|
uintptr_t sys_call2(unsigned int nbr, uintptr_t parm1, uintptr_t parm2);
|
|
|
|
- ``SWI`` with ``SYS_`` call number and three parameters:
|
|
|
|
.. code-block:: C
|
|
|
|
uintptr_t sys_call3(unsigned int nbr, uintptr_t parm1,
|
|
uintptr_t parm2, uintptr_t parm3);
|
|
|
|
- ``SWI`` with ``SYS_`` call number and four parameters:
|
|
|
|
.. code-block:: C
|
|
|
|
uintptr_t sys_call4(unsigned int nbr, uintptr_t parm1, uintptr_t parm2,
|
|
uintptr_t parm3, uintptr_t parm4);
|
|
|
|
- ``SWI`` with ``SYS_`` call number and five parameters:
|
|
|
|
.. code-block:: C
|
|
|
|
uintptr_t sys_call5(unsigned int nbr, uintptr_t parm1, uintptr_t parm2,
|
|
uintptr_t parm3, uintptr_t parm4, uintptr_t parm5);
|
|
|
|
- ``SWI`` with ``SYS_`` call number and six parameters:
|
|
|
|
.. code-block:: C
|
|
|
|
uintptr_t sys_call6(unsigned int nbr, uintptr_t parm1, uintptr_t parm2,
|
|
uintptr_t parm3, uintptr_t parm4, uintptr_t parm5,
|
|
uintptr_t parm6);
|
|
|
|
Syscall Database
|
|
~~~~~~~~~~~~~~~~
|
|
|
|
Sycall information is maintained in a database. That "database" is
|
|
implemented as a simple comma-separated-value file, ``syscall.csv``. Most
|
|
spreadsheets programs will accept this format and can be used to maintain
|
|
the syscall database.
|
|
|
|
The format of the CSV file for each line is:
|
|
|
|
* Field 1: Function name
|
|
|
|
* Field 2: The header file that contains the function prototype
|
|
|
|
* Field 3: Condition for compilation
|
|
|
|
* Field 4: The type of function return value.
|
|
|
|
* Field 5 - N+5: The type of each of the N formal parameters of the function
|
|
|
|
* Fields N+5 - : If the last parameter is "...", then the following fields
|
|
provide the type and number of of possible optional parameters.
|
|
See note below about variadic functions
|
|
|
|
Each type field has a format as follows:
|
|
|
|
* type name:
|
|
|
|
For all simpler types
|
|
|
|
* formal type | actual type:
|
|
|
|
For array types where the form of the formal (eg. ``int parm[2]``)
|
|
differs from the type of actual passed parameter (eg. ``int*``).
|
|
This is necessary because you cannot do simple casts to array types.
|
|
|
|
* formal type | union member actual type | union member fieldname:
|
|
|
|
A similar situation exists for unions. For example, the formal
|
|
parameter type union sigval -- You cannot cast a uintptr_t to
|
|
a union sigval, but you can cast to the type of one of the union
|
|
member types when passing the actual parameter. Similarly, we
|
|
cannot cast a union sigval to a uinptr_t either. Rather, we need
|
|
to cast a specific union member fieldname to ``uintptr_t``.
|
|
|
|
Variadic Functions
|
|
------------------
|
|
|
|
General variadic functions which may have an arbitrary number of argument
|
|
or arbitrary types cannot be represented as system calls.
|
|
``syslog()`` is a good example. Normally you would work around this by
|
|
using the non- variadic form of the OS interface that accepts a ``va_list``
|
|
as an argument, ``vsyslog()`` in this case.
|
|
|
|
There are many functions that have a variadic form but take only
|
|
one or two optional arguments. There can be handled as system
|
|
calls, but only by treating them as though they had a fixed number of
|
|
arguments.
|
|
|
|
These are handled in ``syscall.csv`` by appending the number and type of
|
|
optional arguments. For example, consider the ``open()`` OS interface. Its
|
|
prototype is:
|
|
|
|
.. code-block:: C
|
|
|
|
int open(const char *path, int oflag, ...);
|
|
|
|
In reality, open may take only a single optional argument of type ``mode_t``
|
|
and is represented in ``syscall.csv`` like this::
|
|
|
|
"open","fcntl.h","","int","const char*","int","...","mode_t"
|
|
|
|
The existence of the ``mode_t`` tells ``tools/mksyscall`` that there is at most
|
|
one optional parameter and, if present, it is of type ``mode_t``.
|
|
|
|
NOTE: This CSV file is used not only to support the generate of trap information,
|
|
but also for the generation of symbol tables. See ``Documentation/components/tools/``
|
|
and ``Documentation/components/libs/`` for further information.
|
|
|
|
Auto-Generated Files
|
|
--------------------
|
|
|
|
Stubs and proxies for the sycalls are automatically generated from this CSV
|
|
database. Here the following definition is used:
|
|
|
|
* Proxy - A tiny bit of code that executes in the user space. A proxy
|
|
has exactly the same function prototype as does the "real" function
|
|
for which it proxies. However, it only serves to map the function
|
|
call into a syscall, marshaling all of the system call parameters
|
|
as necessary.
|
|
|
|
* Stub - Another tiny bit of code that executes within the NuttX kernel
|
|
that is used to map a software interrupt received by the kernel to
|
|
a kernel function call. The stubs receive the marshaled system
|
|
call data, and perform the actually kernel function call (in
|
|
kernel-mode) on behalf of the proxy function.
|
|
|
|
Sub-Directories
|
|
---------------
|
|
|
|
* ``stubs`` - Autogenerated stub files are placed in this directory.
|
|
* ``proxies`` - Autogenerated proxy files are placed in this directory.
|
|
|
|
mksyscall
|
|
---------
|
|
|
|
mksyscall is C program that is used during the initial NuttX build
|
|
by the logic in the top-level ``syscall/`` directory. Information about the
|
|
stubs and proxies is maintained in a comma separated value (CSV) file
|
|
in the ``syscall/`` directory. The mksyscall program will accept this CSV
|
|
file as input and generate all of the required proxy or stub files as
|
|
output. See ``Documentation/components/tools/`` for additional information.
|