112 lines
5.3 KiB
C
112 lines
5.3 KiB
C
/**************************************************************************************
|
|
* drivers/lcd/st7567.h
|
|
*
|
|
* Definitions for the ST7567 128x64 Dot Matrix LCD
|
|
* Driver with C
|
|
*
|
|
* Copyright (C) 2013 Zilogic Systems. All rights reserved.
|
|
* Author: Manikandan <code@zilogic.com>
|
|
*
|
|
* Based on drivers/lcd/ssd1305.h
|
|
*
|
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* References: SSD1305.pdf, "Solomon Systech SSD1305 136x64 Dot Matrix OLED/PLED
|
|
* Segment/Common Driver with Controller," Solomon Systech Limited,
|
|
* http://www.solomon-systech.com, May, 2008.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
**************************************************************************************/
|
|
|
|
#ifndef __DRIVERS_LCD_ST7567_H
|
|
#define __DRIVERS_LCD_ST7567_H
|
|
|
|
/**************************************************************************************
|
|
* Included Files
|
|
**************************************************************************************/
|
|
|
|
/**************************************************************************************
|
|
* Pre-processor Definitions
|
|
**************************************************************************************/
|
|
|
|
/* Fundamental Commands *****************************************************/
|
|
|
|
#define ST7567_DISPOFF 0xae /* 0xae: Display OFF (sleep mode) */
|
|
#define ST7567_DISPON 0xaf /* 0xaf: Display ON in normal mode */
|
|
|
|
#define ST7567_SETSTARTLINE 0x40 /* 0x40-7f: Set display start line */
|
|
# define ST7567_STARTLINE_MASK 0x3f
|
|
|
|
#define ST7567_SETPAGESTART 0xb0 /* 0xb0-b7: Set page start address */
|
|
# define ST7567_PAGESTART_MASK 0x07
|
|
|
|
#define ST7567_SETCOLL 0x00 /* 0x00-0x0f: Set lower column address */
|
|
# define ST7567_COLL_MASK 0x0f
|
|
#define ST7567_SETCOLH 0x10 /* 0x10-0x1f: Set higher column address */
|
|
# define ST7567_COLH_MASK 0x0f
|
|
|
|
#define SSD1305_MAPCOL0 0xa0 /* 0xa0: Column address 0 is mapped to SEG0 */
|
|
#define SSD1305_MAPCOL128 0xa1 /* 0xa1: Column address 128 is mapped to SEG0 */
|
|
|
|
#define ST7567_DISPNORMAL 0xa6 /* 0xa6: Normal display */
|
|
#define ST7567_DISPINVERSE 0xa7 /* 0xa7: Inverse display */
|
|
|
|
#define ST7567_DISPRAM 0xa4 /* 0xa4: Resume to RAM content display */
|
|
#define ST7567_DISPENTIRE 0xa5 /* 0xa5: Entire display ON */
|
|
|
|
#define ST7567_BIAS_1_9 0xa2 /* 0xa2: Select BIAS setting 1/9 */
|
|
#define ST7567_BIAS_1_7 0xa3 /* 0xa3: Select BIAS setting 1/7 */
|
|
|
|
#define ST7567_ENTER_RMWMODE 0xe0 /* 0xe0: Enter the Read Modify Write mode */
|
|
#define ST7567_EXIT_RMWMODE 0xee /* 0xee: Leave the Read Modify Write mode */
|
|
#define ST7567_EXIT_SOFTRST 0xe2 /* 0xe2: Software RESET */
|
|
|
|
#define ST7567_SETCOMNORMAL 0xc0 /* 0xc0: Set COM output direction, normal mode */
|
|
#define ST7567_SETCOMREVERSE 0xc8 /* 0xc8: Set COM output direction, reverse mode */
|
|
|
|
#define ST7567_POWERCTRL_VF 0x29 /* 0x29: Control built-in power circuit */
|
|
#define ST7567_POWERCTRL_VR 0x2a /* 0x2a: Control built-in power circuit */
|
|
#define ST7567_POWERCTRL_VB 0x2c /* 0x2c: Control built-in power circuit */
|
|
#define ST7567_POWERCTRL 0x2f /* 0x2c: Control built-in power circuit */
|
|
|
|
#define ST7567_REG_RES_RR0 0x21 /* 0x21: Regulation Resistior ratio */
|
|
#define ST7567_REG_RES_RR1 0x22 /* 0x22: Regulation Resistior ratio */
|
|
#define ST7567_REG_RES_RR2 0x24 /* 0x24: Regulation Resistior ratio */
|
|
|
|
#define ST7567_SETEV 0x81 /* 0x81: Set contrast control */
|
|
|
|
#define ST7567_SETBOOSTER 0xf8 /* Set booster level */
|
|
#define ST7567_SETBOOSTER4X 0x00 /* Set booster level */
|
|
#define ST7567_SETBOOSTER5X 0x01 /* Set booster level */
|
|
|
|
#define ST7567_NOP 0xe3 /* 0xe3: NOP Command for no operation */
|
|
|
|
#endif /* __DRIVERS_LCD_ST7567_H */
|