204 lines
7.3 KiB
C
204 lines
7.3 KiB
C
/****************************************************************************
|
|
* boards/arm/stm32/emw3162/include/board.h
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership. The
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
* "License"); you may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
* License for the specific language governing permissions and limitations
|
|
* under the License.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __BOARDS_ARM_STM32_EMW3162_INCLUDE_BOARD_H
|
|
#define __BOARDS_ARM_STM32_EMW3162_INCLUDE_BOARD_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdbool.h>
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
/* The EMW3162 board features a single 26MHz crystal.
|
|
*
|
|
* This is the canonical configuration:
|
|
* System Clock source : PLL (HSE)
|
|
* SYSCLK(Hz) : 120000000 Determined by PLL
|
|
* configuration
|
|
* HCLK(Hz) : 120000000 (STM32_RCC_CFGR_HPRE)
|
|
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
|
|
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
|
|
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
|
|
* HSE Frequency(Hz) : 26000000 (STM32_BOARD_XTAL)
|
|
* PLLM : 26 (STM32_PLLCFG_PLLM)
|
|
* PLLN : 240 (STM32_PLLCFG_PLLN)
|
|
* PLLP : 2 (STM32_PLLCFG_PLLP)
|
|
* PLLQ : 5 (STM32_PLLCFG_PLLQ)
|
|
* Main regulator output voltage : Scale1 mode Needed for high speed
|
|
* SYSCLK
|
|
* Flash Latency(WS) : 3
|
|
* Prefetch Buffer : OFF
|
|
* Instruction cache : ON
|
|
* Data cache : ON
|
|
* Require 48MHz for USB OTG HS : Enabled
|
|
* SDIO and RNG clock
|
|
*/
|
|
|
|
/* HSI - 16 MHz RC factory-trimmed
|
|
* LSI - 32 KHz RC
|
|
* HSE - On-board crystal frequency is 26MHz
|
|
* LSE - 32.768 kHz
|
|
*/
|
|
|
|
#define STM32_BOARD_XTAL 26000000ul
|
|
|
|
#define STM32_HSI_FREQUENCY 16000000ul
|
|
#define STM32_LSI_FREQUENCY 32000
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
#define STM32_LSE_FREQUENCY 32768
|
|
|
|
/* Main PLL Configuration.
|
|
*
|
|
* PLL source is HSE
|
|
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
|
* = (26,000,000 / 26) * 240
|
|
* = 240,000,000
|
|
* SYSCLK = PLL_VCO / PLLP
|
|
* = 240,000,000 / 2 = 120,000,000
|
|
* USB OTG FS, SDIO and RNG Clock
|
|
* = PLL_VCO / PLLQ
|
|
* = 48,000,000
|
|
*/
|
|
|
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(26)
|
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(240)
|
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
|
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(5)
|
|
|
|
#define STM32_SYSCLK_FREQUENCY 120000000ul
|
|
|
|
/* AHB clock (HCLK) is SYSCLK (120MHz) */
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
|
|
|
/* APB1 clock (PCLK1) is HCLK/4 (30MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
|
|
|
/* APB2 clock (PCLK2) is HCLK/2 (60MHz) */
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
|
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
/* LED definitions **********************************************************/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED1 0
|
|
#define BOARD_NLEDS 1
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
|
|
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
|
|
* defined. In that case, the usage by the board port is defined in
|
|
* include/board.h and src/sam_autoleds.c. The LEDs are used to encode
|
|
* OS-related events as follows:
|
|
*
|
|
* ------------------- ---------------------------- ------
|
|
* SYMBOL Meaning LED
|
|
* ------------------- ---------------------------- ------
|
|
*/
|
|
|
|
#define LED_STARTED 0 /* NuttX has been started OFF */
|
|
#define LED_HEAPALLOCATE 0 /* Heap has been allocated OFF */
|
|
#define LED_IRQSENABLED 0 /* Interrupts enabled OFF */
|
|
#define LED_STACKCREATED 1 /* Idle stack created ON */
|
|
#define LED_INIRQ 2 /* In an interrupt N/C */
|
|
#define LED_SIGNAL 2 /* In a signal handler N/C */
|
|
#define LED_ASSERTION 2 /* An assertion failed N/C */
|
|
#define LED_PANIC 3 /* The system has crashed FLASH */
|
|
#undef LED_IDLE /* MCU is is sleep mode Not used */
|
|
|
|
/* Thus if LED is statically on, NuttX has successfully booted and is,
|
|
* apparently, running normally. If LED is flashing at approximately
|
|
* 2Hz, then a fatal error has been detected and the system has halted.
|
|
*/
|
|
|
|
/* Alternate function pin selections ****************************************/
|
|
|
|
/* UART1 */
|
|
|
|
#ifdef CONFIG_STM32_USART1
|
|
# define GPIO_USART1_RX GPIO_USART1_RX_1
|
|
# define GPIO_USART1_TX GPIO_USART1_TX_1
|
|
#endif
|
|
|
|
/* SDIO definitions *********************************************************/
|
|
|
|
/* Note that slower clocking is required when DMA is disabled in order
|
|
* to avoid RX overrun/TX underrun errors due to delayed responses
|
|
* to service FIFOs in interrupt driven mode.
|
|
*
|
|
* These values have not been tuned!!!
|
|
*
|
|
* SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
|
|
*/
|
|
|
|
#define SDIO_INIT_CLKDIV (118 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
|
|
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
|
|
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
|
|
*/
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
# define SDIO_MMCXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#else
|
|
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#endif
|
|
|
|
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
|
|
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
|
|
*/
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
|
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#else
|
|
# define SDIO_SDXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
|
#endif
|
|
|
|
/* DMA Channel/Stream Selections ********************************************/
|
|
|
|
/* Stream selections are arbitrary for now but might become important in the
|
|
* future if we set aside more DMA channels/streams.
|
|
*
|
|
* SDIO DMA
|
|
* DMAMAP_SDIO_1 = Channel 4, Stream 3
|
|
* DMAMAP_SDIO_2 = Channel 4, Stream 6
|
|
*/
|
|
|
|
#define DMAMAP_SDIO DMAMAP_SDIO_1
|
|
|
|
#endif /* __BOARDS_ARM_STM32_EMW3162_INCLUDE_BOARD_H */
|