incubator-nuttx/drivers/usbdev/usbdev_trace.c

257 lines
7.6 KiB
C

/****************************************************************************
* drivers/usbdev/usbdev_trace.c
*
* Copyright (C) 2008-2010, 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdarg.h>
#include <stdint.h>
#include <errno.h>
#include <debug.h>
#include <arch/irq.h>
#include <nuttx/usb/usbdev_trace.h>
#undef usbtrace
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_USBDEV_TRACE_NRECORDS
# define CONFIG_USBDEV_TRACE_NRECORDS 128
#endif
#ifndef CONFIG_USBDEV_TRACE_INITIALIDSET
# define CONFIG_USBDEV_TRACE_INITIALIDSET 0
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
#ifdef CONFIG_USBDEV_TRACE
static struct usbtrace_s g_trace[CONFIG_USBDEV_TRACE_NRECORDS];
static uint16_t g_head = 0;
static uint16_t g_tail = 0;
#endif
#if defined(CONFIG_USBDEV_TRACE) || (defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_USB))
static usbtrace_idset_t g_maskedidset = CONFIG_USBDEV_TRACE_INITIALIDSET;
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: usbtrace_syslog
****************************************************************************/
#if !defined(CONFIG_USBDEV_TRACE) && \
(defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_USB))
static int usbtrace_syslog(const char *fmt, ...)
{
va_list ap;
int ret;
/* Let lowvsyslog do the real work */
va_start(ap, fmt);
ret = lowvsyslog(LOG_INFO, fmt, ap);
va_end(ap);
return ret;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: usbtrace_enable
*
* Description:
* Enable/disable tracing per trace ID. The initial state is all IDs enabled.
*
* Input Parameters:
* idset - The bitset of IDs to be masked. TRACE_ALLIDS enables all IDS; zero
* masks all IDs.
*
* Returned Value:
* The previous idset value.
*
* Assumptions:
* - May be called from an interrupt handler
*
****************************************************************************/
#if defined(CONFIG_USBDEV_TRACE) || \
(defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_USB))
usbtrace_idset_t usbtrace_enable(usbtrace_idset_t idset)
{
irqstate_t flags;
usbtrace_idset_t ret;
/* The following read and write must be atomic */
flags = irqsave();
ret = g_maskedidset;
g_maskedidset = idset;
irqrestore(flags);
return ret;
}
#endif /* CONFIG_USBDEV_TRACE || CONFIG_DEBUG && CONFIG_DEBUG_USB */
/****************************************************************************
* Name: usbtrace
*
* Description:
* Record a USB event (tracing must be enabled)
*
* Assumptions:
* May be called from an interrupt handler
*
****************************************************************************/
#if defined(CONFIG_USBDEV_TRACE) || (defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_USB))
void usbtrace(uint16_t event, uint16_t value)
{
irqstate_t flags;
/* Check if tracing is enabled for this ID */
flags = irqsave();
if ((g_maskedidset & TRACE_ID2BIT(event)) != 0)
{
#ifdef CONFIG_USBDEV_TRACE
/* Yes... save the new trace data at the head */
g_trace[g_head].event = event;
g_trace[g_head].value = value;
/* Increment the head and (probably) the tail index */
if (++g_head >= CONFIG_USBDEV_TRACE_NRECORDS)
{
g_head = 0;
}
if (g_head == g_tail)
{
if (++g_tail >= CONFIG_USBDEV_TRACE_NRECORDS)
{
g_tail = 0;
}
}
#else
/* Just print the data using lowsyslog */
usbtrace_trprintf(usbtrace_syslog, event, value);
#endif
}
irqrestore(flags);
}
#endif /* CONFIG_USBDEV_TRACE || CONFIG_DEBUG && CONFIG_DEBUG_USB */
/****************************************************************************
* Name: usbtrace_enumerate
*
* Description:
* Enumerate all buffer trace data (will temporarily disable tracing)
*
* Assumptions:
* NEVER called from an interrupt handler
*
****************************************************************************/
#ifdef CONFIG_USBDEV_TRACE
int usbtrace_enumerate(trace_callback_t callback, void *arg)
{
uint16_t ndx;
uint32_t idset;
int ret = OK;
/* Temporarily disable tracing */
idset = usbtrace_enable(0);
/* Visit every entry, starting with the tail */
for (ndx = g_tail; ndx != g_head; )
{
/* Call the user provided callback */
ret = callback(&g_trace[ndx], arg);
if (ret != OK)
{
/* Abort the enumeration */
break;
}
/* Increment the index */
if (++ndx >= CONFIG_USBDEV_TRACE_NRECORDS)
{
ndx = 0;
}
}
/* Discard the trace data after it has been reported */
g_tail = g_head;
/* Restore tracing state */
(void)usbtrace_enable(idset);
return ret;
}
#endif /* CONFIG_USBDEV_TRACE */