incubator-nuttx/net/icmpv6/icmpv6_rnotify.c

309 lines
9.7 KiB
C

/****************************************************************************
* net/icmpv6/icmpv6_rnotify.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <string.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <netinet/in.h>
#include <nuttx/irq.h>
#include <nuttx/net/net.h>
#include <nuttx/net/netdev.h>
#include "netdev/netdev.h"
#include "utils/utils.h"
#include "icmpv6/icmpv6.h"
#ifdef CONFIG_NET_ICMPv6_AUTOCONF
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/* List of tasks waiting for Neighbor Discover events */
static struct icmpv6_rnotify_s *g_icmpv6_rwaiters;
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: icmpv6_setaddresses
*
* Description:
* We successfully obtained the Router Advertisement. Set the new IPv6
* addresses in the driver structure.
*
****************************************************************************/
void icmpv6_setaddresses(FAR struct net_driver_s *dev,
const net_ipv6addr_t draddr,
const net_ipv6addr_t prefix,
unsigned int preflen)
{
unsigned int i;
/* Lock the network.
*
* NOTE: Normally it is required that the network be in the "down" state
* when re-configuring the network interface. This is thought not to be
* a problem here because.
*
* 1. The ICMPv6 logic here runs with the network locked so there can be
* no outgoing packets with bad source IP addresses from any
* asynchronous network activity using the device being reconfigured.
* 2. Incoming packets depend only upon the MAC filtering. Network
* drivers do not use the IP address; they filter incoming packets
* using only the MAC address which is not being changed here.
*/
net_lock();
/* Create an address mask from the prefix */
if (preflen > 128)
{
preflen = 128;
}
net_ipv6_pref2mask(preflen, dev->d_ipv6netmask);
ninfo("preflen=%d netmask=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
preflen, NTOHS(dev->d_ipv6netmask[0]), NTOHS(dev->d_ipv6netmask[1]),
NTOHS(dev->d_ipv6netmask[2]), NTOHS(dev->d_ipv6netmask[3]),
NTOHS(dev->d_ipv6netmask[4]), NTOHS(dev->d_ipv6netmask[5]),
NTOHS(dev->d_ipv6netmask[6]), NTOHS(dev->d_ipv6netmask[7]));
/* Copy prefix to the current IPv6 address, applying the mask */
for (i = 0; i < 7; i++)
{
dev->d_ipv6addr[i] = (dev->d_ipv6addr[i] & ~dev->d_ipv6netmask[i]) |
(prefix[i] & dev->d_ipv6netmask[i]);
}
ninfo("prefix=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
NTOHS(prefix[0]), NTOHS(prefix[1]), NTOHS(prefix[2]),
NTOHS(prefix[3]), NTOHS(prefix[4]), NTOHS(prefix[5]),
NTOHS(prefix[6]), NTOHS(prefix[7]));
ninfo("IP address=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
NTOHS(dev->d_ipv6addr[0]), NTOHS(dev->d_ipv6addr[1]),
NTOHS(dev->d_ipv6addr[2]), NTOHS(dev->d_ipv6addr[3]),
NTOHS(dev->d_ipv6addr[4]), NTOHS(dev->d_ipv6addr[5]),
NTOHS(dev->d_ipv6addr[6]), NTOHS(dev->d_ipv6addr[7]));
/* Finally, copy the router address */
net_ipv6addr_copy(dev->d_ipv6draddr, draddr);
ninfo("DR address=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
NTOHS(dev->d_ipv6draddr[0]), NTOHS(dev->d_ipv6draddr[1]),
NTOHS(dev->d_ipv6draddr[2]), NTOHS(dev->d_ipv6draddr[3]),
NTOHS(dev->d_ipv6draddr[4]), NTOHS(dev->d_ipv6draddr[5]),
NTOHS(dev->d_ipv6draddr[6]), NTOHS(dev->d_ipv6draddr[7]));
net_unlock();
}
/****************************************************************************
* Name: icmpv6_rwait_setup
*
* Description:
* Called BEFORE an Router Solicitation is sent. This function sets up
* the Router Advertisement timeout before the Router Solicitation
* is sent so that there is no race condition when icmpv6_rwait() is
* called.
*
* Assumptions:
* This function is called from icmpv6_autoconfig() and executes in the
* normal tasking environment.
*
****************************************************************************/
void icmpv6_rwait_setup(FAR struct net_driver_s *dev,
FAR struct icmpv6_rnotify_s *notify)
{
irqstate_t flags;
/* Initialize the wait structure */
memcpy(notify->rn_ifname, dev->d_ifname, IFNAMSIZ);
notify->rn_result = -ETIMEDOUT;
nxsem_init(&notify->rn_sem, 0, 0);
/* Add the wait structure to the list with interrupts disabled */
flags = enter_critical_section();
notify->rn_flink = g_icmpv6_rwaiters;
g_icmpv6_rwaiters = notify;
leave_critical_section(flags);
}
/****************************************************************************
* Name: icmpv6_rwait_cancel
*
* Description:
* Cancel any wait set after icmpv6_rwait_setup() is called but before
* icmpv6_rwait()is called (icmpv6_rwait() will automatically cancel the
* wait).
*
* Assumptions:
* This function may execute in the interrupt context when called from
* icmpv6_rwait().
*
****************************************************************************/
int icmpv6_rwait_cancel(FAR struct icmpv6_rnotify_s *notify)
{
FAR struct icmpv6_rnotify_s *curr;
FAR struct icmpv6_rnotify_s *prev;
irqstate_t flags;
int ret = -ENOENT;
ninfo("Canceling...\n");
/* Remove our wait structure from the list (we may no longer be at the
* head of the list).
*/
flags = enter_critical_section();
for (prev = NULL, curr = g_icmpv6_rwaiters;
curr && curr != notify;
prev = curr, curr = curr->rn_flink)
{
}
DEBUGASSERT(curr && curr == notify);
if (curr)
{
if (prev)
{
prev->rn_flink = notify->rn_flink;
}
else
{
g_icmpv6_rwaiters = notify->rn_flink;
}
ret = OK;
}
leave_critical_section(flags);
nxsem_destroy(&notify->rn_sem);
return ret;
}
/****************************************************************************
* Name: icmpv6_rwait
*
* Description:
* Called each time that a Router Solicitation is sent. This function
* will sleep until either: (1) the matching Router Advertisement is
* received, or (2) a timeout occurs.
*
* Assumptions:
* This function is called from icmpv6_autoconfig() and must execute with
* the network locked.
*
****************************************************************************/
int icmpv6_rwait(FAR struct icmpv6_rnotify_s *notify, unsigned int timeout)
{
int ret;
ninfo("Waiting...\n");
/* And wait for the Neighbor Advertisement (or a timeout). */
ret = net_sem_timedwait(&notify->rn_sem, timeout);
if (ret >= 0)
{
ret = notify->rn_result;
}
/* Remove our wait structure from the list (we may no longer be at the
* head of the list).
*/
icmpv6_rwait_cancel(notify);
return ret;
}
/****************************************************************************
* Name: icmpv6_rnotify
*
* Description:
* Called each time that a Router Advertisement is received in order to
* wake-up any threads that may be waiting for this particular Router
* Advertisement.
*
* Assumptions:
* This function is called from the MAC device driver indirectly through
* icmpv6_icmpv6in() will execute with the network locked.
*
****************************************************************************/
void icmpv6_rnotify(FAR struct net_driver_s *dev)
{
FAR struct icmpv6_rnotify_s *curr;
ninfo("Notified\n");
/* Find an entry with the matching device name in the list of waiters */
for (curr = g_icmpv6_rwaiters; curr; curr = curr->rn_flink)
{
/* Does this entry match? If the result is okay, then we have
* already notified this waiter and it has not yet taken the
* entry from the list.
*/
if (curr->rn_result != OK &&
strncmp(curr->rn_ifname, dev->d_ifname, IFNAMSIZ) == 0)
{
/* And signal the waiting, returning success */
curr->rn_result = OK;
nxsem_post(&curr->rn_sem);
break;
}
}
}
#endif /* CONFIG_NET_ICMPv6_AUTOCONF */