OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/fs/smartfs/smartfs.h

391 lines
16 KiB
C
Raw Blame History

/****************************************************************************
* fs/smartfs/smartfs.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __FS_SMARTFS_SMARTFS_H
#define __FS_SMARTFS_SMARTFS_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <nuttx/mtd/mtd.h>
#include <nuttx/fs/smart.h>
#include <nuttx/semaphore.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* SMART Definitions ********************************************************/
/* General SMART organization. The following example assumes 4 logical
* sectors per FLASH erase block. The actual relationship is determined by
* the FLASH geometry reported by the MTD driver.
*
* ERASE LOGICAL Sectors begin with a sector header.
* Sectors may be marked as "released,"
* BLOCK SECTOR CONTENTS pending garbage collection
* n 4*n --+---------------+
* Hdr |LLLLLLLLLLLLLLL| Logical sector number (2 bytes)
* |QQQQQQQQQQQQQQQ| Sequence number (2 bytes)
* |SSSSSSSSSSSSSSS| Status bits (1 byte)
* +---------------+
* |TTTTTTTTTTTTTTT| Sector Type (dir or file) (1 byte)
* |NNNNNNNNNNNNNNN| Number of next logical sector in chain
* |UUUUUUUUUUUUUUU| Number of bytes used in this sector
* | |
* | (Sector Data) |
* | |
* 4*n+1 --+---------------+
* Sector Hdr |LLLLLLLLLLLLLLL| Logical sector number (2 bytes)
* |QQQQQQQQQQQQQQQ| Sequence number (2 bytes)
* |SSSSSSSSSSSSSSS| Status bits (1 byte)
* +---------------+
* FS Hdr |TTTTTTTTTTTTTTT| Sector Type (dir or file) (1 byte)
* |NNNNNNNNNNNNNNN| Number of next logical sector in chain
* |UUUUUUUUUUUUUUU| Number of bytes used in this sector
* | |
* | (Sector Data) |
* | |
* 4*n+2 --+---------------+
* Sector Hdr |LLLLLLLLLLLLLLL| Logical sector number (2 bytes)
* |QQQQQQQQQQQQQQQ| Sequence number (2 bytes)
* |SSSSSSSSSSSSSSS| Status bits (1 byte)
* +---------------+
* FS Hdr |TTTTTTTTTTTTTTT| Sector Type (dir or file) (1 byte)
* |NNNNNNNNNNNNNNN| Number of next logical sector in chain
* |UUUUUUUUUUUUUUU| Number of bytes used in this sector
* | |
* | (Sector Data) |
* | |
* 4*n+3 --+---------------+
* Sector Hdr |LLLLLLLLLLLLLLL| Logical sector number (2 bytes)
* |QQQQQQQQQQQQQQQ| Sequence number (2 bytes)
* |SSSSSSSSSSSSSSS| Status bits (1 byte)
* +---------------+
* FS Hdr |TTTTTTTTTTTTTTT| Sector Type (dir or file) (1 byte)
* |NNNNNNNNNNNNNNN| Number of next logical sector in chain
* |UUUUUUUUUUUUUUU| Number of bytes used in this sector
* | |
* | (Sector Data) |
* | |
* n+1 4*(n+1) --+---------------+
* Sector Hdr |LLLLLLLLLLLLLLL| Logical sector number (2 bytes)
* |QQQQQQQQQQQQQQQ| Sequence number (2 bytes)
* |SSSSSSSSSSSSSSS| Status bits (1 byte)
* +---------------+
* FS Hdr |TTTTTTTTTTTTTTT| Sector Type (dir or file) (1 byte)
* |NNNNNNNNNNNNNNN| Number of next logical sector in chain
* |UUUUUUUUUUUUUUU| Number of bytes used in this sector
* | |
* | |
* | |
* --+---------------+
*
* General operation:
* Physical sectors are allocated and assigned a logical sector number
* and a starting sequence number of zero.
*
* SECTOR HEADER:
* The sector header (first 5 bytes) tracks the state of each sector and
* is used by the SMART MTD block driver. At the block level, there is
* no notion of sector chaining, only allocated sectors within erase
* blocks.
*
* FILE SYSTEM (FS) HEADER:
* The file system header (next 5 bytes) tracks file and directory entries
* and chains.
*
* SMART Limitations:
* 1. SMART currently depends on the underlying MTD block driver supporting
* single-byte programming operation. This is due to the method it
* uses for marking a sector as "released", committed, etc.
* 2. Garbage collection can occur when a new sector is allocated or when
* existing sector data is overwritten with new data. Thus, occasionally,
* file writing may take longer than other times.
* 3. The implementation currently does not track bad blocks on the device.
* 4. There is no true wear-leveling implemented yet, though provesion have
* been made to reserve logical sectors to allow it to be added using
* a "sector aging" tracking mechanism.
*/
/* Values for SMART inode state.
*
* SMART_STATE_FILE - The inode is a valid usable, file
* INODE_STATE_DELETED - The inode has been deleted.
* Other values - The inode is bad and has an invalid state.
*
* Care is taken so that the VALID to DELETED transition only involves
* burning bits from the erased to non-erased state.
*/
#define INODE_STATE_FILE (CONFIG_NXFFS_ERASEDSTATE ^ 0x22)
#define INODE_STATE_DELETED (CONFIG_NXFFS_ERASEDSTATE ^ 0xaa)
/* Directory entry flag definitions */
#define SMARTFS_DIRENT_EMPTY 0x8000 /* Set to non-erase state when entry used */
#define SMARTFS_DIRENT_ACTIVE 0x4000 /* Set to erase state when entry is active */
#define SMARTFS_DIRENT_TYPE 0x2000 /* Indicates the type of entry (file/dir) */
#define SMARTFS_DIRENT_DELETING 0x1000 /* Directory entry is being deleted */
#define SMARTFS_DIRENT_RESERVED 0x0E00 /* Reserved bits */
#define SMARTFS_DIRENT_MODE 0x01FF /* Mode the file was created with */
#define SMARTFS_DIRENT_TYPE_DIR 0x2000
#define SMARTFS_DIRENT_TYPE_FILE 0x0000
/* Number of bytes in the SMART magic sequences */
#define SMART_MAGICSIZE 4
/* Underlying MTD Block driver access functions */
#define FS_BOPS(f) (f)->fs_blkdriver->u.i_bops
#define FS_IOCTL(f,c,a) (FS_BOPS(f)->ioctl ? FS_BOPS(f)->ioctl((f)->fs_blkdriver,c,a) : (-ENOSYS))
/* The logical sector number of the root directory. */
#define SMARTFS_ROOT_DIR_SECTOR 3
/* Defines the sector types */
#define SMARTFS_SECTOR_TYPE_DIR 1
#define SMARTFS_SECTOR_TYPE_FILE 2
#ifndef CONFIG_SMARTFS_DIRDEPTH
# define CONFIG_SMARTFS_DIRDEPTH 8
#endif
/* Buffer flags (when CRC enabled) */
#define SMARTFS_BFLAG_DIRTY 0x01 /* Set if data changed in the sector */
#define SMARTFS_BFLAG_NEWALLOC 0x02 /* Set if sector not written since alloc */
#define SMARTFS_ERASEDSTATE_16BIT (uint16_t) ((CONFIG_SMARTFS_ERASEDSTATE << 8) | \
CONFIG_SMARTFS_ERASEDSTATE)
/* Size of temporary buffer used when a file is zero extended by ftruncate()
* logic.
*/
#define SMARTFS_TRUNCBUFFER_SIZE 512
#ifndef offsetof
# define offsetof(type, member) ((size_t) & (((type *)0)->member))
#endif
#define SMARTFS_NEXTSECTOR(h) (*((uint16_t *)h->nextsector))
#define SMARTFS_USED(h) (*((uint16_t *)h->used))
#ifdef CONFIG_MTD_SMART_ENABLE_CRC
#define CONFIG_SMARTFS_USE_SECTOR_BUFFER
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/* This structure defines each packed block on the FLASH media */
/* This is an in-memory representation of the SMART inode as extracted from
* FLASH and with additional state information.
*/
struct smartfs_entry_s
{
uint16_t firstsector; /* Sector number of the name */
uint16_t dsector; /* Sector number of the directory entry */
uint16_t doffset; /* Offset of the directory entry */
uint16_t dfirst; /* 1st sector number of the directory entry */
uint16_t flags; /* Flags, including mode */
FAR char *name; /* inode name */
uint32_t utc; /* Time stamp */
uint32_t datlen; /* Length of inode data */
};
/* This is an on-device representation of the SMART inode as it exists on
* the FLASH.
*/
struct smartfs_entry_header_s
{
uint16_t flags; /* Flags, including permissions:
* 15: Empty entry
* 14: Active entry
* 12-0: Permissions bits */
int16_t firstsector; /* Sector number of the name */
uint32_t utc; /* Time stamp */
char name[0]; /* inode name */
};
/* This structure describes the smartfs header at the start of each
* sector. It manages the sector chain and used bytes in the sector.
*/
#if defined(CONFIG_MTD_SMART_ENABLE_CRC) && defined(CONFIG_SMART_CRC_32)
struct smartfs_chain_header_s
{
uint8_t nextsector[4]; /* Next logical sector in the chain */
uint8_t used[4]; /* Number of bytes used in this sector */
uint8_t type; /* Type of sector entry (file or dir) */
};
#elif defined(CONFIG_MTD_SMART_ENABLE_CRC) && defined(CONFIG_SMART_CRC_16)
struct smartfs_chain_header_s
{
uint8_t type; /* Type of sector entry (file or dir) */
uint8_t nextsector[2]; /* Next logical sector in the chain */
uint8_t used[2]; /* Number of bytes used in this sector */
};
#else
struct smartfs_chain_header_s
{
uint8_t type; /* Type of sector entry (file or dir) */
uint8_t nextsector[2]; /* Next logical sector in the chain */
uint8_t used[2]; /* Number of bytes used in this sector */
};
#endif
/* This structure describes the state of one open file. This structure
* is protected by the volume semaphore.
*/
struct smartfs_ofile_s
{
struct smartfs_ofile_s *fnext; /* Supports a singly linked list */
#ifdef CONFIG_SMARTFS_USE_SECTOR_BUFFER
uint8_t *buffer; /* Sector buffer to reduce writes */
uint8_t bflags; /* Buffer flags */
#endif
int16_t crefs; /* Reference count */
mode_t oflags; /* Open mode */
struct smartfs_entry_s entry; /* Describes the SMARTFS inode entry */
size_t filepos; /* Current file position */
uint16_t currsector; /* Current sector of filepos */
uint16_t curroffset; /* Current offset in sector */
uint16_t byteswritten; /* Count of bytes written to currsector
* that have not been recorded in the
* sector yet. We delay updating the
* used field until the file is closed,
* a seek, or more data is written that
* causes the sector to change.
*/
};
/* This structure represents the overall mountpoint state. An instance of
* this structure is retained as inode private data on each mountpoint that
* is mounted with a smartfs filesystem.
*/
struct smartfs_mountpt_s
{
#if defined(CONFIG_SMARTFS_MULTI_ROOT_DIRS) || defined(CONFIG_FS_PROCFS)
struct smartfs_mountpt_s *fs_next; /* Pointer to next SMART filesystem */
#endif
FAR struct inode *fs_blkdriver; /* Our underlying block device */
sem_t *fs_sem; /* Used to assure thread-safe access */
FAR struct smartfs_ofile_s *fs_head; /* A singly-linked list of open files */
bool fs_mounted; /* true: The file system is ready */
struct smart_format_s fs_llformat; /* Low level device format info */
char *fs_rwbuffer; /* Read/Write working buffer */
char *fs_workbuffer; /* Working buffer */
uint8_t fs_rootsector; /* Root directory sector num */
};
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Functions Prototypes
****************************************************************************/
/* Semaphore access for internal use */
int smartfs_semtake(struct smartfs_mountpt_s *fs);
void smartfs_semgive(struct smartfs_mountpt_s *fs);
/* Forward references for utility functions */
struct smartfs_mountpt_s;
/* Utility functions */
int smartfs_mount(FAR struct smartfs_mountpt_s *fs, bool writeable);
int smartfs_unmount(FAR struct smartfs_mountpt_s *fs);
int smartfs_finddirentry(FAR struct smartfs_mountpt_s *fs,
FAR struct smartfs_entry_s *direntry, FAR const char *relpath,
FAR uint16_t *parentdirsector, FAR const char **filename);
int smartfs_createentry(FAR struct smartfs_mountpt_s *fs,
uint16_t parentdirsector, FAR const char *filename,
uint16_t type,
mode_t mode, FAR struct smartfs_entry_s *direntry,
uint16_t sectorno, FAR struct smartfs_ofile_s *sf);
int smartfs_deleteentry(FAR struct smartfs_mountpt_s *fs,
FAR struct smartfs_entry_s *entry);
int smartfs_countdirentries(FAR struct smartfs_mountpt_s *fs,
FAR struct smartfs_entry_s *entry);
int smartfs_sync_internal(FAR struct smartfs_mountpt_s *fs,
FAR struct smartfs_ofile_s *sf);
off_t smartfs_seek_internal(FAR struct smartfs_mountpt_s *fs,
FAR struct smartfs_ofile_s *sf, off_t offset, int whence);
int smartfs_shrinkfile(FAR struct smartfs_mountpt_s *fs,
FAR struct smartfs_ofile_s *sf, off_t length);
int smartfs_extendfile(FAR struct smartfs_mountpt_s *fs,
FAR struct smartfs_ofile_s *sf, off_t length);
uint16_t smartfs_rdle16(FAR const void *val);
void smartfs_wrle16(void *dest, uint16_t val);
uint32_t smartfs_rdle32(FAR const void *val);
void smartfs_wrle32(uint8_t *dest, uint32_t val);
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
struct smartfs_mountpt_s *smartfs_get_first_mount(void);
#endif
#if defined(CONFIG_FS_PROCFS) && !defined(CONFIG_FS_PROCFS_EXCLUDE_SMARTFS)
struct smartfs_mountpt_s *smartfs_get_first_mount(void);
#endif
struct file; /* Forward references */
struct inode;
struct fs_dirent_s;
struct statfs;
struct stat;
#endif /* __FS_SMARTFS_SMARTFS_H */
Reference in New Issue View Git Blame Copy Permalink