162 lines
4.5 KiB
Plaintext
162 lines
4.5 KiB
Plaintext
README
|
|
^^^^^^
|
|
|
|
Toolchain
|
|
^^^^^^^^^
|
|
|
|
A GNU GCC-based toolchain is assumed. The PATH environment variable should
|
|
be modified to point to the correct path to the SH toolchain (if
|
|
different from the default).
|
|
|
|
If you have no ARM toolchain, one can be downloaded from the NuttX
|
|
Bitbucket download site (https://bitbucket.org/nuttx/buildroot/downloads/).
|
|
|
|
1. You must have already configured Nuttx in <some-dir>nuttx.
|
|
|
|
tools/configure.sh c5471evm/<sub-dir>
|
|
|
|
2. Download the latest buildroot package into <some-dir>
|
|
|
|
3. unpack
|
|
|
|
4. cd <some-dir>/buildroot
|
|
|
|
5. cp configs/arm-defconfig .config
|
|
|
|
6. make oldconfig
|
|
|
|
7. make
|
|
|
|
8. Make sure that the PATH variable includes the path to the newly built
|
|
binaries.
|
|
|
|
Issues
|
|
^^^^^^
|
|
|
|
Title: UART RECONFIGURATION
|
|
Description: UART re-configuration is untested and conditionally compiled out.
|
|
Status: Open
|
|
Priority: Medium. ttyS1 is not configured, but not used; ttyS0 is configured
|
|
by the bootloader
|
|
|
|
ARM/C5471-specific Configuration Options
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
|
be set to:
|
|
|
|
CONFIG_ARCH=arm
|
|
|
|
CONFIG_ARCH_family - For use in C code:
|
|
|
|
CONFIG_ARCH_ARM=y
|
|
|
|
CONFIG_ARCH_architecture - For use in C code:
|
|
|
|
CONFIG_ARCH_ARM7TDMI=y
|
|
|
|
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
|
|
|
CONFIG_ARCH_CHIP=c5471
|
|
|
|
CONFIG_ARCH_CHIP_name - For use in C code
|
|
|
|
CONFIG_ARCH_CHIP_C5471
|
|
|
|
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
|
hence, the board that supports the particular chip or SoC.
|
|
|
|
CONFIG_ARCH_BOARD=c5471evm (for the Spectrum Digital C5471 EVM)
|
|
|
|
CONFIG_ARCH_BOARD_name - For use in C code
|
|
|
|
CONFIG_ARCH_BOARD_C5471EVM (for the Spectrum Digital C5471 EVM)
|
|
|
|
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
|
of delay loops
|
|
|
|
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
|
endian)
|
|
|
|
CONFIG_ROM_VECTORS - should be defined for the C5471 because the
|
|
interrupt vectors are in ROM
|
|
|
|
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
|
have LEDs
|
|
|
|
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
|
stack. If defined, this symbol is the size of the interrupt
|
|
stack in bytes. If not defined, the user task stacks will be
|
|
used during interrupt handling.
|
|
|
|
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
|
|
|
C5471 specific device driver settings
|
|
|
|
CONFIG_SERIAL_IRDA_CONSOLE - selects the IRDA UART for the
|
|
console ant ttys0 (default is the modem UART).
|
|
CONFIG_UART_*_HWFLOWCONTROL - enables hardware flow control
|
|
CONFIG_UART_*_RXBUFSIZE - Characters are buffered as received.
|
|
This specific the size of the receive buffer
|
|
CONFIG_UART_*_TXBUFSIZE - Characters are buffered before
|
|
being sent. This specific the size of the transmit buffer
|
|
CONFIG_UART_*_BAUD - The configure BAUD of the UART. Must be
|
|
CONFIG_UART_*_BITS - The number of bits. Must be either 7 or 8.
|
|
CONFIG_UART_*_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
|
CONFIG_UART_*_2STOP - Two stop bits
|
|
|
|
C5471 Ethernet Driver settings
|
|
|
|
CONFIG_C5471_NET_STATS
|
|
CONFIG_C5471_PHY_AC101L or C5471_PHY_LU3X31T_T64
|
|
CONFIG_C5471_AUTONEGOTIATION
|
|
CONFIG_C5471_BASET100
|
|
CONFIG_C5471_BASET10
|
|
|
|
Configurations
|
|
^^^^^^^^^^^^^^
|
|
|
|
Common Configuration Notes
|
|
--------------------------
|
|
|
|
1. Each C5471 configuration is maintained in a sub-directory and
|
|
can be selected as follow:
|
|
|
|
tools/configure.sh c5471evm/<subdir>
|
|
|
|
Where <subdir> is one of the configuration sub-directories described in
|
|
the following paragraph.
|
|
|
|
2. These configurations use the mconf-based configuration tool. To
|
|
change a configurations using that tool, you should:
|
|
|
|
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
|
see additional README.txt files in the NuttX tools repository.
|
|
|
|
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
|
reconfiguration process.
|
|
|
|
3. By default, all configurations assume the NuttX Buildroot toolchain
|
|
under Linux (should work under Windows with Cygwin as well). This
|
|
is easily reconfigured:
|
|
|
|
CONFIG_HOST_LINUX=y
|
|
CONFIG_ARM_TOOLCHAIN_BUILDROOT=y
|
|
|
|
Configuration Sub-Directories
|
|
-----------------------------
|
|
|
|
nettest
|
|
|
|
This configuration enables networking using the c5471's built-in Ethernet
|
|
interface. It uses examples/nettest to exercise the TCP/IP network.
|
|
|
|
nsh
|
|
|
|
This configuration file builds NSH (examples/nsh) using the TELNET server
|
|
front end
|
|
|
|
httpd
|
|
|
|
This configuration uses the tiny webserver for uIP.
|