882 lines
20 KiB
Plaintext
882 lines
20 KiB
Plaintext
############################################################################
|
|
# configs/stm3240g-eval/nxwm/defconfig
|
|
#
|
|
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
#
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in
|
|
# the documentation and/or other materials provided with the
|
|
# distribution.
|
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
|
# used to endorse or promote products derived from this software
|
|
# without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
# POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
############################################################################
|
|
#
|
|
# Architecture Selection
|
|
#
|
|
CONFIG_ARCH="arm"
|
|
CONFIG_ARCH_ARM=y
|
|
CONFIG_ARCH_CORTEXM4=y
|
|
CONFIG_ARCH_CHIP="stm32"
|
|
CONFIG_ARCH_CHIP_STM32F407IG=y
|
|
CONFIG_ARCH_BOARD="stm3240g-eval"
|
|
CONFIG_ARCH_BOARD_STM3240G_EVAL=y
|
|
CONFIG_BOARD_LOOPSPERMSEC=16717
|
|
CONFIG_DRAM_SIZE=196608
|
|
CONFIG_DRAM_START=0x20000000
|
|
CONFIG_ARCH_IRQPRIO=y
|
|
CONFIG_ARCH_FPU=n
|
|
CONFIG_ARCH_INTERRUPTSTACK=0
|
|
CONFIG_ARCH_STACKDUMP=y
|
|
CONFIG_ARCH_BOOTLOADER=n
|
|
CONFIG_ARCH_LEDS=y
|
|
CONFIG_ARCH_BUTTONS=n
|
|
CONFIG_ARCH_CALIBRATION=n
|
|
CONFIG_ARCH_DMA=n
|
|
|
|
#
|
|
# Identify toolchain and linker options
|
|
#
|
|
CONFIG_STM32_CODESOURCERYW=y
|
|
CONFIG_STM32_CODESOURCERYL=n
|
|
CONFIG_STM32_ATOLLIC_LITE=n
|
|
CONFIG_STM32_ATOLLIC_PRO=n
|
|
CONFIG_STM32_DEVKITARM=n
|
|
CONFIG_STM32_RAISONANCE=n
|
|
CONFIG_STM32_BUILDROOT=n
|
|
|
|
#
|
|
# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
|
|
#
|
|
CONFIG_STM32_DFU=y
|
|
CONFIG_STM32_JTAG_FULL_ENABLE=y
|
|
CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
|
|
CONFIG_STM32_JTAG_SW_ENABLE=n
|
|
|
|
#
|
|
# On-chip CCM SRAM configuration
|
|
#
|
|
|
|
#
|
|
# On-board FSMC SRAM configuration
|
|
#
|
|
CONFIG_STM32_FSMC_SRAM=n
|
|
CONFIG_HEAP2_BASE=0x64000000
|
|
CONFIG_HEAP2_SIZE=2097152
|
|
|
|
#
|
|
# Individual subsystems can be enabled:
|
|
#
|
|
# AHB1:
|
|
CONFIG_STM32_CRC=n
|
|
CONFIG_STM32_BKPSRAM=n
|
|
CONFIG_STM32_CCMDATARAM=n
|
|
CONFIG_STM32_DMA1=n
|
|
CONFIG_STM32_DMA2=n
|
|
CONFIG_STM32_ETHMAC=y
|
|
CONFIG_STM32_OTGHS=n
|
|
# AHB2:
|
|
CONFIG_STM32_DCMI=n
|
|
CONFIG_STM32_CRYP=n
|
|
CONFIG_STM32_HASH=n
|
|
CONFIG_STM32_RNG=n
|
|
CONFIG_STM32_OTGFS=n
|
|
# AHB3:
|
|
CONFIG_STM32_FSMC=y
|
|
# APB1:
|
|
CONFIG_STM32_TIM2=n
|
|
CONFIG_STM32_TIM3=n
|
|
CONFIG_STM32_TIM4=n
|
|
CONFIG_STM32_TIM5=n
|
|
CONFIG_STM32_TIM6=n
|
|
CONFIG_STM32_TIM7=n
|
|
CONFIG_STM32_TIM12=n
|
|
CONFIG_STM32_TIM13=n
|
|
CONFIG_STM32_TIM14=n
|
|
CONFIG_STM32_WWDG=n
|
|
CONFIG_STM32_IWDG=n
|
|
CONFIG_STM32_SPI2=n
|
|
CONFIG_STM32_SPI3=n
|
|
CONFIG_STM32_USART2=n
|
|
CONFIG_STM32_USART3=y
|
|
CONFIG_STM32_UART4=n
|
|
CONFIG_STM32_UART5=n
|
|
CONFIG_STM32_I2C1=y
|
|
CONFIG_STM32_I2C2=n
|
|
CONFIG_STM32_I2C3=n
|
|
CONFIG_STM32_CAN1=n
|
|
CONFIG_STM32_CAN2=n
|
|
CONFIG_STM32_DAC=n
|
|
CONFIG_STM32_PWR=y
|
|
# APB2:
|
|
CONFIG_STM32_TIM1=n
|
|
CONFIG_STM32_TIM8=n
|
|
CONFIG_STM32_USART1=n
|
|
CONFIG_STM32_USART6=n
|
|
CONFIG_STM32_ADC1=n
|
|
CONFIG_STM32_ADC2=n
|
|
CONFIG_STM32_ADC3=n
|
|
CONFIG_STM32_SDIO=n
|
|
CONFIG_STM32_SPI1=n
|
|
CONFIG_STM32_SYSCFG=y
|
|
CONFIG_STM32_TIM9=n
|
|
CONFIG_STM32_TIM10=n
|
|
CONFIG_STM32_TIM11=n
|
|
|
|
#
|
|
# STM32F40xxx specific serial device driver settings
|
|
#
|
|
CONFIG_USART1_SERIAL_CONSOLE=n
|
|
CONFIG_USART2_SERIAL_CONSOLE=n
|
|
CONFIG_USART3_SERIAL_CONSOLE=y
|
|
CONFIG_UART4_SERIAL_CONSOLE=n
|
|
CONFIG_UART5_SERIAL_CONSOLE=n
|
|
|
|
CONFIG_USART1_TXBUFSIZE=128
|
|
CONFIG_USART2_TXBUFSIZE=128
|
|
CONFIG_USART3_TXBUFSIZE=128
|
|
CONFIG_UART4_TXBUFSIZE=128
|
|
CONFIG_UART5_TXBUFSIZE=128
|
|
|
|
CONFIG_USART1_RXBUFSIZE=128
|
|
CONFIG_USART2_RXBUFSIZE=128
|
|
CONFIG_USART3_RXBUFSIZE=128
|
|
CONFIG_UART4_RXBUFSIZE=128
|
|
CONFIG_UART5_RXBUFSIZE=128
|
|
|
|
CONFIG_USART1_BAUD=115200
|
|
CONFIG_USART2_BAUD=115200
|
|
CONFIG_USART3_BAUD=115200
|
|
CONFIG_UART4_BAUD=115200
|
|
CONFIG_UART5_BAUD=115200
|
|
|
|
CONFIG_USART1_BITS=8
|
|
CONFIG_USART2_BITS=8
|
|
CONFIG_USART3_BITS=8
|
|
CONFIG_UART4_BITS=8
|
|
CONFIG_UART5_BITS=8
|
|
|
|
CONFIG_USART1_PARITY=0
|
|
CONFIG_USART2_PARITY=0
|
|
CONFIG_USART3_PARITY=0
|
|
CONFIG_UART4_PARITY=0
|
|
CONFIG_UART5_PARITY=0
|
|
|
|
CONFIG_USART1_2STOP=0
|
|
CONFIG_USART2_2STOP=0
|
|
CONFIG_USART3_2STOP=0
|
|
CONFIG_UART4_2STOP=0
|
|
CONFIG_UART5_2STOP=0
|
|
|
|
#
|
|
# STM32F40xxx specific CAN device driver settings
|
|
#
|
|
CONFIG_CAN=n
|
|
CONFIG_CAN_EXTID=n
|
|
#CONFIG_CAN_FIFOSIZE
|
|
#CONFIG_CAN_NPENDINGRTR
|
|
CONFIG_CAN_LOOPBACK=n
|
|
CONFIG_CAN1_BAUD=700000
|
|
CONFIG_CAN2_BAUD=700000
|
|
|
|
#
|
|
# STM32F40xxx Ethernet device driver settings
|
|
#
|
|
CONFIG_STM32_PHYADDR=1
|
|
CONFIG_STM32_MII=y
|
|
CONFIG_STM32_MII_MCO1=y
|
|
CONFIG_STM32_MII_MCO2=n
|
|
CONFIG_STM32_RMII=n
|
|
CONFIG_STM32_AUTONEG=y
|
|
#CONFIG_STM32_ETHFD
|
|
#CONFIG_STM32_ETH100MB
|
|
CONFIG_STM32_PHYSR=16
|
|
CONFIG_STM32_PHYSR_SPEED=0x0002
|
|
CONFIG_STM32_PHYSR_100MBPS=0x0000
|
|
CONFIG_STM32_PHYSR_MODE=0x0004
|
|
CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
|
|
CONFIG_STM32_ETH_PTP=n
|
|
CONFIG_STM32_ETHMAC_REGDEBUG=n
|
|
|
|
#
|
|
# I2C configuration
|
|
#
|
|
CONFIG_I2C=y
|
|
CONFIG_I2C_POLLED=y
|
|
CONFIG_I2C_TRANSFER=y
|
|
CONFIG_I2C_TRACE=n
|
|
|
|
#
|
|
# ADC configuration
|
|
#
|
|
# Enable ADC driver support. The STM3240G-EVAL has a 10 Kohm potentiometer
|
|
# RV1 connected to PF9 of STM32F407IGH6 on the board: TIM14_CH1/ SMC_CD/ADC3_IN7
|
|
#
|
|
CONFIG_ADC=n
|
|
#CONFIG_STM32_TIM1_ADC=y
|
|
CONFIG_STM32_TIM1_ADC3=y
|
|
CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100
|
|
|
|
#
|
|
# PWM configuration
|
|
#
|
|
# The STM3240G-Eval has no real on-board PWM devices, but the board can be configured to output
|
|
# a pulse train using several options (see board.h). Here the default setup is for TIM8, CH4.
|
|
# Don't forget to enable CONFIG_PWM and CONFIG_STM32_TIM8.
|
|
#
|
|
CONFIG_PWM=n
|
|
CONFIG_PWM_PULSECOUNT=y
|
|
CONFIG_STM32_TIM8_PWM=y
|
|
CONFIG_STM32_TIM8_CHANNEL=4
|
|
|
|
#
|
|
# General build options
|
|
#
|
|
CONFIG_RRLOAD_BINARY=n
|
|
CONFIG_INTELHEX_BINARY=y
|
|
CONFIG_MOTOROLA_SREC=n
|
|
CONFIG_RAW_BINARY=n
|
|
|
|
#
|
|
# General OS setup
|
|
#
|
|
CONFIG_USER_ENTRYPOINT="nxwm_main"
|
|
CONFIG_DEBUG=n
|
|
CONFIG_DEBUG_VERBOSE=n
|
|
CONFIG_DEBUG_SYMBOLS=n
|
|
CONFIG_DEBUG_FS=n
|
|
CONFIG_DEBUG_GRAPHICS=n
|
|
CONFIG_DEBUG_LCD=n
|
|
CONFIG_DEBUG_USB=n
|
|
CONFIG_DEBUG_NET=n
|
|
CONFIG_DEBUG_RTC=n
|
|
CONFIG_DEBUG_ANALOG=n
|
|
CONFIG_DEBUG_PWM=n
|
|
CONFIG_DEBUG_CAN=n
|
|
CONFIG_DEBUG_I2C=n
|
|
CONFIG_DEBUG_INPUT=n
|
|
|
|
CONFIG_HAVE_CXX=y
|
|
CONFIG_HAVE_CXXINITIALIZE=y
|
|
CONFIG_MM_REGIONS=2
|
|
CONFIG_ARCH_LOWPUTC=y
|
|
CONFIG_RR_INTERVAL=200
|
|
CONFIG_SCHED_INSTRUMENTATION=n
|
|
CONFIG_TASK_NAME_SIZE=0
|
|
CONFIG_START_YEAR=2012
|
|
CONFIG_START_MONTH=5
|
|
CONFIG_START_DAY=6
|
|
CONFIG_GREGORIAN_TIME=n
|
|
CONFIG_JULIAN_TIME=n
|
|
CONFIG_DEV_CONSOLE=y
|
|
CONFIG_DEV_LOWCONSOLE=n
|
|
CONFIG_MUTEX_TYPES=n
|
|
CONFIG_PRIORITY_INHERITANCE=n
|
|
CONFIG_SEM_PREALLOCHOLDERS=0
|
|
CONFIG_SEM_NNESTPRIO=0
|
|
CONFIG_FDCLONE_DISABLE=n
|
|
CONFIG_FDCLONE_STDIO=n
|
|
CONFIG_SDCLONE_DISABLE=y
|
|
CONFIG_SCHED_WORKQUEUE=y
|
|
CONFIG_SCHED_WORKPRIORITY=192
|
|
CONFIG_SCHED_WORKPERIOD=50000
|
|
CONFIG_SCHED_WORKSTACKSIZE=2048
|
|
CONFIG_SIG_SIGWORK=17
|
|
CONFIG_SCHED_WAITPID=y
|
|
CONFIG_SCHED_ATEXIT=n
|
|
CONFIG_SCHED_ONEXIT=y
|
|
|
|
#
|
|
# System Logging
|
|
#
|
|
|
|
CONFIG_SYSLOG=n
|
|
CONFIG_RAMLOG=n
|
|
CONFIG_RAMLOG_CONSOLE=n
|
|
CONFIG_RAMLOG_SYSLOG=n
|
|
#CONFIG_RAMLOG_NPOLLWAITERS
|
|
#CONFIG_RAMLOG_CONSOLE_BUFSIZE
|
|
|
|
#
|
|
# Settings for NXFLAT
|
|
#
|
|
CONFIG_NXFLAT=n
|
|
CONFIG_NXFLAT_DUMPBUFFER=n
|
|
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
|
|
|
#
|
|
# The following can be used to disable categories of
|
|
# APIs supported by the OS. If the compiler supports
|
|
# weak functions, then it should not be necessary to
|
|
# disable functions unless you want to restrict usage
|
|
# of those APIs.
|
|
#
|
|
# There are certain dependency relationships in these
|
|
# features.
|
|
#
|
|
# o mq_notify logic depends on signals to awaken tasks
|
|
# waiting for queues to become full or empty.
|
|
# o pthread_condtimedwait() depends on signals to wake
|
|
# up waiting tasks.
|
|
#
|
|
CONFIG_DISABLE_CLOCK=n
|
|
CONFIG_DISABLE_POSIX_TIMERS=n
|
|
CONFIG_DISABLE_PTHREAD=n
|
|
CONFIG_DISABLE_SIGNALS=n
|
|
CONFIG_DISABLE_MQUEUE=n
|
|
CONFIG_DISABLE_MOUNTPOINT=n
|
|
CONFIG_DISABLE_ENVIRON=n
|
|
CONFIG_DISABLE_POLL=y
|
|
|
|
#
|
|
# Misc libc settings
|
|
#
|
|
CONFIG_NOPRINTF_FIELDWIDTH=n
|
|
|
|
#
|
|
# Allow for architecture optimized implementations
|
|
#
|
|
# The architecture can provide optimized versions of the
|
|
# following to improve system performance
|
|
#
|
|
CONFIG_ARCH_MEMCPY=n
|
|
CONFIG_ARCH_MEMCMP=n
|
|
CONFIG_ARCH_MEMMOVE=n
|
|
CONFIG_ARCH_MEMSET=n
|
|
CONFIG_ARCH_STRCMP=n
|
|
CONFIG_ARCH_STRCPY=n
|
|
CONFIG_ARCH_STRNCPY=n
|
|
CONFIG_ARCH_STRLEN=n
|
|
CONFIG_ARCH_STRNLEN=n
|
|
CONFIG_ARCH_BZERO=n
|
|
|
|
#
|
|
# Sizes of configurable things (0 disables)
|
|
#
|
|
CONFIG_MAX_TASKS=16
|
|
CONFIG_MAX_TASK_ARGS=4
|
|
CONFIG_NPTHREAD_KEYS=4
|
|
CONFIG_NFILE_DESCRIPTORS=12
|
|
CONFIG_NFILE_STREAMS=12
|
|
CONFIG_NAME_MAX=32
|
|
CONFIG_STDIO_BUFFER_SIZE=64
|
|
CONFIG_STDIO_LINEBUFFER=y
|
|
CONFIG_NUNGET_CHARS=2
|
|
CONFIG_PREALLOC_MQ_MSGS=32
|
|
CONFIG_MQ_MAXMSGSIZE=48
|
|
CONFIG_MAX_WDOGPARMS=2
|
|
CONFIG_PREALLOC_WDOGS=8
|
|
CONFIG_PREALLOC_TIMERS=4
|
|
|
|
#
|
|
# Framebuffer driver options
|
|
#
|
|
CONFIG_FB_CMAP=n
|
|
CONFIG_FB_HWCURSOR=n
|
|
CONFIG_FB_HWCURSORIMAGE=n
|
|
#CONFIG_FB_HWCURSORSIZE
|
|
#CONFIG_FB_TRANSPARENCY
|
|
|
|
#
|
|
# Filesystem configuration
|
|
#
|
|
CONFIG_FS_FAT=y
|
|
CONFIG_FAT_LCNAMES=y
|
|
CONFIG_FAT_LFN=y
|
|
CONFIG_FAT_MAXFNAME=32
|
|
CONFIG_FS_NXFFS=n
|
|
CONFIG_FS_ROMFS=n
|
|
|
|
#
|
|
# Maintain legacy build behavior (revisit)
|
|
#
|
|
|
|
CONFIG_MMCSD=y
|
|
CONFIG_MMCSD_SPI=y
|
|
CONFIG_MMCSD_SDIO=y
|
|
CONFIG_MTD=y
|
|
|
|
#
|
|
# SPI-based MMC/SD driver
|
|
#
|
|
CONFIG_MMCSD_NSLOTS=1
|
|
CONFIG_MMCSD_READONLY=n
|
|
CONFIG_MMCSD_SPICLOCK=12500000
|
|
|
|
#
|
|
# Block driver buffering
|
|
#
|
|
CONFIG_FS_READAHEAD=n
|
|
CONFIG_FS_WRITEBUFFER=n
|
|
|
|
#
|
|
# STM32 SDIO-based MMC/SD driver
|
|
#
|
|
CONFIG_SDIO_DMA=n
|
|
#CONFIG_SDIO_PRI=128
|
|
#CONFIG_SDIO_DMAPRIO
|
|
#CONFIG_SDIO_WIDTH_D1_ONLY
|
|
CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
|
|
CONFIG_MMCSD_MMCSUPPORT=n
|
|
CONFIG_MMCSD_HAVECARDDETECT=n
|
|
|
|
#
|
|
# TCP/IP and UDP support via uIP
|
|
#
|
|
CONFIG_NET=y
|
|
CONFIG_NET_NOINTS=n
|
|
CONFIG_NET_MULTIBUFFER=y
|
|
CONFIG_NET_IPv6=n
|
|
CONFIG_NSOCKET_DESCRIPTORS=10
|
|
CONFIG_NET_SOCKOPTS=y
|
|
CONFIG_NET_BUFSIZE=562
|
|
CONFIG_NET_TCP=y
|
|
CONFIG_NET_TCP_CONNS=40
|
|
#CONFIG_NET_TCP_READAHEAD_BUFSIZE
|
|
CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
|
|
CONFIG_NET_TCPBACKLOG=y
|
|
CONFIG_NET_MAX_LISTENPORTS=40
|
|
CONFIG_NET_UDP=y
|
|
CONFIG_NET_UDP_CHECKSUMS=y
|
|
#CONFIG_NET_UDP_CONNS=10
|
|
CONFIG_NET_ICMP=y
|
|
CONFIG_NET_ICMP_PING=y
|
|
#CONFIG_NET_PINGADDRCONF=0
|
|
CONFIG_NET_STATISTICS=y
|
|
#CONFIG_NET_RECEIVE_WINDOW=
|
|
CONFIG_NET_BROADCAST=n
|
|
#CONFIG_NET_ARPTAB_SIZE=8
|
|
CONFIG_NET_ARP_IPIN=n
|
|
CONFIG_NET_MULTICAST=n
|
|
|
|
#
|
|
# UIP Network Utilities
|
|
#
|
|
CONFIG_NET_DHCP_LIGHT=n
|
|
CONFIG_NET_RESOLV_ENTRIES=4
|
|
|
|
#
|
|
# FTP Server
|
|
#
|
|
CONFIG_FTPD_CMDBUFFERSIZE=2048
|
|
|
|
#
|
|
# RTC Configuration
|
|
#
|
|
CONFIG_RTC=y
|
|
CONFIG_RTC_DATETIME=y
|
|
CONFIG_RTC_HIRES=n
|
|
CONFIG_RTC_FREQUENCY=1
|
|
CONFIG_RTC_ALARM=n
|
|
|
|
#
|
|
# Input device configuration
|
|
#
|
|
CONFIG_INPUT=y
|
|
CONFIG_INPUT_TSC2007=n
|
|
|
|
#
|
|
# STMPE811 input device configuration
|
|
#
|
|
# Prerequisites: CONFIG_INPUT=y
|
|
# Other settings that effect the driver: CONFIG_DISABLE_POLL
|
|
#
|
|
CONFIG_INPUT_STMPE811=y
|
|
CONFIG_STMPE811_SPI=n
|
|
CONFIG_STMPE811_I2C=y
|
|
CONFIG_STMPE811_MULTIPLE=y
|
|
CONFIG_STMPE811_ACTIVELOW=y
|
|
CONFIG_STMPE811_EDGE=y
|
|
#CONFIG_STMPE811_NPOLLWAITERS
|
|
CONFIG_STMPE811_TSC_DISABLE=n
|
|
CONFIG_STMPE811_ADC_DISABLE=y
|
|
CONFIG_STMPE811_GPIO_DISABLE=y
|
|
CONFIG_STMPE811_GPIOINT_DISABLE=y
|
|
CONFIG_STMPE811_SWAPXY=n
|
|
CONFIG_STMPE811_TEMP_DISABLE=y
|
|
CONFIG_STMPE811_REGDEBUG=n
|
|
CONFIG_STMPE811_THRESHX=39
|
|
CONFIG_STMPE811_THRESHY=51
|
|
|
|
#
|
|
# STM32 USB OTG FS Device Configuration
|
|
#
|
|
CONFIG_USBDEV=n
|
|
CONFIG_USBDEV_ISOCHRONOUS=n
|
|
CONFIG_USBDEV_DUALSPEED=n
|
|
CONFIG_USBDEV_SELFPOWERED=y
|
|
CONFIG_USBDEV_REMOTEWAKEUP=n
|
|
CONFIG_USBDEV_MAXPOWER=100
|
|
CONFIG_USBDEV_TRACE=n
|
|
CONFIG_USBDEV_TRACE_NRECORDS=128
|
|
|
|
#
|
|
# STM32 USB OTG FS Host Configuration
|
|
#
|
|
CONFIG_USBHOST=n
|
|
#CONFIG_STM32_OTGFS_RXFIFO_SIZE
|
|
#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
|
|
#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
|
|
#CONFIG_STM32_OTGFS_DESCSIZE
|
|
CONFIG_STM32_OTGFS_SOFINTR=n
|
|
CONFIG_STM32_USBHOST_REGDEBUG=n
|
|
CONFIG_STM32_USBHOST_PKTDUMP=n
|
|
|
|
#
|
|
# USB Serial Device Configuration
|
|
#
|
|
CONFIG_PL2303=n
|
|
CONFIG_PL2303_EPINTIN=1
|
|
CONFIG_PL2303_EPBULKOUT=2
|
|
CONFIG_PL2303_EPBULKIN=3
|
|
CONFIG_PL2303_NWRREQS=4
|
|
CONFIG_PL2303_NRDREQS=4
|
|
CONFIG_PL2303_VENDORID=0x067b
|
|
CONFIG_PL2303_PRODUCTID=0x2303
|
|
CONFIG_PL2303_VENDORSTR="Nuttx"
|
|
CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
|
|
CONFIG_PL2303_RXBUFSIZE=512
|
|
CONFIG_PL2303_TXBUFSIZE=512
|
|
|
|
#
|
|
# USB Storage Device Configuration
|
|
#
|
|
CONFIG_USBMSC=n
|
|
CONFIG_USBMSC_EP0MAXPACKET=64
|
|
CONFIG_USBMSC_EPBULKOUT=2
|
|
CONFIG_USBMSC_EPBULKIN=5
|
|
CONFIG_USBMSC_NRDREQS=2
|
|
CONFIG_USBMSC_NWRREQS=2
|
|
CONFIG_USBMSC_BULKINREQLEN=256
|
|
CONFIG_USBMSC_BULKOUTREQLEN=256
|
|
CONFIG_USBMSC_VENDORID=0x584e
|
|
CONFIG_USBMSC_VENDORSTR="NuttX"
|
|
CONFIG_USBMSC_PRODUCTID=0x5342
|
|
CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
|
|
CONFIG_USBMSC_VERSIONNO=0x0399
|
|
CONFIG_USBMSC_REMOVABLE=y
|
|
|
|
#
|
|
# Graphics related configuration settings
|
|
#
|
|
CONFIG_NX=y
|
|
CONFIG_NX_MULTIUSER=y
|
|
CONFIG_NX_NPLANES=1
|
|
CONFIG_NX_DISABLE_1BPP=y
|
|
CONFIG_NX_DISABLE_2BPP=y
|
|
CONFIG_NX_DISABLE_4BPP=y
|
|
CONFIG_NX_DISABLE_8BPP=y
|
|
CONFIG_NX_DISABLE_16BPP=n
|
|
CONFIG_NX_DISABLE_24BPP=y
|
|
CONFIG_NX_DISABLE_32BPP=y
|
|
CONFIG_NX_PACKEDMSFIRST=n
|
|
CONFIG_NX_LCDDRIVER=y
|
|
CONFIG_LCD_MAXPOWER=1
|
|
CONFIG_LCD_MAXCONTRAST=1
|
|
CONFIG_NX_MOUSE=y
|
|
CONFIG_NX_KBD=y
|
|
#CONFIG_NXTK_BORDERWIDTH=4
|
|
CONFIG_NXTK_BORDERCOLOR1=0x5cb7
|
|
CONFIG_NXTK_BORDERCOLOR2=0x21c9
|
|
CONFIG_NXTK_BORDERCOLOR3=0xffdf
|
|
CONFIG_NXTK_AUTORAISE=n
|
|
CONFIG_NXFONT_SANS17X22=n
|
|
CONFIG_NXFONT_SANS20X26=n
|
|
CONFIG_NXFONT_SANS22X29=n
|
|
CONFIG_NXFONT_SANS23X27=y
|
|
CONFIG_NXFONT_SANS28X37=n
|
|
CONFIG_NXFONT_SANS17X23B=n
|
|
CONFIG_NXFONT_SANS20X27B=n
|
|
CONFIG_NXFONT_SANS22X29B=y
|
|
CONFIG_NXFONT_SANS28X37B=n
|
|
CONFIG_NXFONT_SANS40X49B=n
|
|
CONFIG_NXFONT_SERIF22X29=n
|
|
CONFIG_NXFONT_SERIF29X37=n
|
|
CONFIG_NXFONT_SERIF38X48=n
|
|
CONFIG_NXFONT_SERIF22X28B=n
|
|
CONFIG_NXFONT_SERIF27X38B=n
|
|
CONFIG_NXFONT_SERIF38X49B=n
|
|
CONFIG_NXFONTS_CHARBITS=7
|
|
CONFIG_NX_BLOCKING=y
|
|
CONFIG_NX_MXSERVERMSGS=32
|
|
CONFIG_NX_MXCLIENTMSGS=16
|
|
|
|
#
|
|
# NxWidgets / NxWM
|
|
#
|
|
# Use all defaults except
|
|
# 1. 16 bits-per-pixel
|
|
# 2. Make the NxWidgets background color match the NxWM back color
|
|
# 3. Build in support for keyboard input in NxConsole
|
|
# 4. Taskbar on the left
|
|
# 5. We do have a touchscreen
|
|
# 6. We do want the NxWM keybard listener
|
|
# 7. Use a larger font with the calculator
|
|
#
|
|
CONFIG_NXWIDGETS_BPP=16
|
|
CONFIG_NXWIDGETS_SERVERSTACK=2048
|
|
CONFIG_NXWIDGETS_LISTENERSTACK=2048
|
|
CONFIG_NXWIDGETS_DEFAULT_BACKGROUNDCOLOR=MKRGB(148,189,215)
|
|
CONFIG_NXWIDGETS_DEFAULT_SELECTEDBACKGROUNDCOLOR=MKRGB(206,227,241)
|
|
CONFIG_NXWIDGETS_DEFAULT_SHADOWEDGECOLOR=MKRGB(35,58,73)
|
|
|
|
CONFIG_NXCONSOLE_NXKBDIN=y
|
|
|
|
CONFIG_NXWM_TASKBAR_LEFT=y
|
|
CONFIG_NXWM_NXCONSOLE_STACKSIZE=2048
|
|
CONFIG_NXWM_TASKBAR_VSPACING=4
|
|
CONFIG_NXWM_UNITTEST=y
|
|
CONFIG_NXWM_TOUCHSCREEN=y
|
|
CONFIG_NXWM_KEYBOARD=y
|
|
CONFIG_NXWM_HEXCALCULATOR_FONTID=5
|
|
|
|
#
|
|
# NxConsole Configuration Settings:
|
|
#
|
|
CONFIG_NXCONSOLE=y
|
|
CONFIG_NXCONSOLE_BPP=16
|
|
CONFIG_NXCONSOLE_MXCHARS=325
|
|
CONFIG_NXCONSOLE_CACHESIZE=32
|
|
#
|
|
|
|
#
|
|
# STM3240G-EVAL LCD Hardware Configuration
|
|
#
|
|
CONFIG_LCD_NOGETRUN=y
|
|
CONFIG_LCD_LANDSCAPE=y
|
|
CONFIG_LCD_RLANDSCAPE=n
|
|
CONFIG_LCD_PORTRAIT=n
|
|
CONFIG_LCD_RPORTRAIT=n
|
|
|
|
#
|
|
# STM3240G-EVAL specific LCD settings
|
|
#
|
|
CONFIG_STM32_ILI9320_DISABLE=n
|
|
CONFIG_STM32_ILI9325_DISABLE=n
|
|
|
|
#
|
|
# Settings for examples/uip
|
|
#
|
|
CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
|
|
CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
|
|
CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
|
|
CONFIG_EXAMPLES_UIP_DHCPC=n
|
|
|
|
#
|
|
# Settings for examples/nettest
|
|
CONFIG_EXAMPLES_NETTEST_SERVER=n
|
|
CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
|
|
CONFIG_EXAMPLES_NETTEST_NOMAC=y
|
|
CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
|
|
CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
|
|
CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
|
|
CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
|
|
|
|
#
|
|
# Settings for examples/ostest
|
|
#
|
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
|
|
|
#
|
|
# Settings for apps/nshlib
|
|
#
|
|
CONFIG_NSH_BUILTIN_APPS=n
|
|
|
|
CONFIG_NSH_FILEIOSIZE=512
|
|
CONFIG_NSH_STRERROR=n
|
|
CONFIG_NSH_LINELEN=64
|
|
CONFIG_NSH_NESTDEPTH=3
|
|
CONFIG_NSH_DISABLESCRIPT=n
|
|
CONFIG_NSH_DISABLEBG=n
|
|
CONFIG_NSH_ROMFSETC=n
|
|
CONFIG_NSH_CONSOLE=y
|
|
#CONFIG_NSH_CONDEV="/dev/ttyS1"
|
|
CONFIG_NSH_TELNET=y
|
|
CONFIG_NSH_ARCHINIT=n
|
|
CONFIG_NSH_IOBUFFER_SIZE=512
|
|
CONFIG_NSH_DHCPC=n
|
|
CONFIG_NSH_NOMAC=y
|
|
CONFIG_NSH_IPADDR=0x0a000002
|
|
CONFIG_NSH_DRIPADDR=0x0a000001
|
|
CONFIG_NSH_NETMASK=0xffffff00
|
|
CONFIG_NSH_ROMFSMOUNTPT="/etc"
|
|
CONFIG_NSH_INITSCRIPT="init.d/rcS"
|
|
CONFIG_NSH_ROMFSDEVNO=0
|
|
CONFIG_NSH_ROMFSSECTSIZE=64
|
|
CONFIG_NSH_FATDEVNO=1
|
|
CONFIG_NSH_FATSECTSIZE=512
|
|
CONFIG_NSH_FATNSECTORS=1024
|
|
CONFIG_NSH_FATMOUNTPT="/tmp"
|
|
|
|
#
|
|
# Architecture-specific NSH options
|
|
#
|
|
CONFIG_NSH_MMCSDSPIPORTNO=0
|
|
CONFIG_NSH_MMCSDSLOTNO=0
|
|
CONFIG_NSH_MMCSDMINOR=0
|
|
|
|
#
|
|
# I2C tool settings
|
|
#
|
|
CONFIG_I2CTOOL_BUILTIN=y
|
|
CONFIG_I2CTOOL_MINBUS=1
|
|
CONFIG_I2CTOOL_MAXBUS=3
|
|
#CONFIG_I2CTOOL_MINADDR
|
|
#CONFIG_I2CTOOL_MAXADDR
|
|
#CONFIG_I2CTOOL_MAXREGADDR
|
|
CONFIG_I2CTOOL_DEFFREQ=100000
|
|
|
|
#
|
|
# Settings for examples/usbserial
|
|
#
|
|
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
|
|
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
|
|
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
|
|
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
|
|
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
|
|
|
#
|
|
# Settings for examples/adc
|
|
#
|
|
|
|
#
|
|
# Settings for examples/can
|
|
#
|
|
|
|
#
|
|
# Settings for examples/nx
|
|
#
|
|
CONFIG_EXAMPLES_NX_BUILTIN=y
|
|
CONFIG_EXAMPLES_NX_VPLANE=0
|
|
CONFIG_EXAMPLES_NX_DEVNO=0
|
|
CONFIG_EXAMPLES_NX_BGCOLOR=0x0011
|
|
CONFIG_EXAMPLES_NX_COLOR1=0xaedc
|
|
CONFIG_EXAMPLES_NX_COLOR2=0xe7ff
|
|
CONFIG_EXAMPLES_NX_TBCOLOR=0xd69a
|
|
CONFIG_EXAMPLES_NX_FONTID=0
|
|
CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000
|
|
CONFIG_EXAMPLES_NX_BPP=16
|
|
CONFIG_EXAMPLES_NX_RAWWINDOWS=n
|
|
CONFIG_EXAMPLES_NX_STACKSIZE=2048
|
|
CONFIG_EXAMPLES_NX_CLIENTPRIO=80
|
|
CONFIG_EXAMPLES_NX_SERVERPRIO=120
|
|
CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
|
|
CONFIG_EXAMPLES_NX_EXTERNINIT=n
|
|
|
|
#
|
|
# Settings for examples/nxhello
|
|
#
|
|
CONFIG_EXAMPLES_NXHELLO_BUILTIN=y
|
|
CONFIG_EXAMPLES_NXHELLO_VPLANE=0
|
|
CONFIG_EXAMPLES_NXHELLO_DEVNO=0
|
|
CONFIG_EXAMPLES_NXHELLO_BGCOLOR=0x0011
|
|
CONFIG_EXAMPLES_NXHELLO_FONTID=6
|
|
CONFIG_EXAMPLES_NXHELLO_FONTCOLOR=0xffdf
|
|
CONFIG_EXAMPLES_NXHELLO_BPP=16
|
|
CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=n
|
|
|
|
#
|
|
# Settings for examples/nximage
|
|
#
|
|
CONFIG_EXAMPLES_NXIMAGE_BUILTIN=y
|
|
CONFIG_EXAMPLES_NXIMAGE_VPLANE=0
|
|
CONFIG_EXAMPLES_NXIMAGE_DEVNO=0
|
|
CONFIG_EXAMPLES_NXIMAGE_BPP=16
|
|
CONFIG_EXAMPLES_NXIMAGE_XSCALEp5=n
|
|
CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5=y
|
|
CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0=n
|
|
CONFIG_EXAMPLES_NXIMAGE_YSCALEp5=n
|
|
CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5=y
|
|
CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0=n
|
|
CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=n
|
|
|
|
#
|
|
# Settings for examples/nxlines
|
|
#
|
|
CONFIG_EXAMPLES_NXLINES_VPLANE=0
|
|
CONFIG_EXAMPLES_NXLINES_DEVNO=0
|
|
CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320
|
|
CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
|
|
CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0
|
|
CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
|
|
CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0
|
|
CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb
|
|
CONFIG_EXAMPLES_NXLINES_BPP=16
|
|
CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n
|
|
|
|
#
|
|
# Settings for examples/touchscreen
|
|
#
|
|
CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN=n
|
|
CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0
|
|
CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0"
|
|
CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES=25
|
|
|
|
#
|
|
# Settings for examples/usbstorage
|
|
#
|
|
CONFIG_EXAMPLES_USBMSC_BUILTIN=y
|
|
CONFIG_EXAMPLES_USBMSC_NLUNS=1
|
|
CONFIG_EXAMPLES_USBMSC_DEVMINOR1=0
|
|
CONFIG_EXAMPLES_USBMSC_DEVPATH1="/dev/mmcsd0"
|
|
CONFIG_EXAMPLES_USBMSC_DEBUGMM=n
|
|
CONFIG_EXAMPLES_USBMSC_TRACEINIT=n
|
|
CONFIG_EXAMPLES_USBMSC_TRACECLASS=n
|
|
CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n
|
|
CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n
|
|
CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n
|
|
|
|
#
|
|
# Settings for examples/watchdog
|
|
#
|
|
# This test depends on these specific Watchdog/NSH configurations settings (your
|
|
# specific watchdog hardware settings might require additional settings).
|
|
#
|
|
|
|
#
|
|
# Settings for examples/pwm
|
|
#
|
|
|
|
#
|
|
# Settings for examples/ftpd
|
|
#
|
|
|
|
#
|
|
# Stack and heap information
|
|
#
|
|
CONFIG_BOOT_RUNFROMFLASH=n
|
|
CONFIG_BOOT_COPYTORAM=n
|
|
CONFIG_CUSTOM_STACK=n
|
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
|
CONFIG_USERMAIN_STACKSIZE=2048
|
|
CONFIG_PTHREAD_STACK_MIN=256
|
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|