367 lines
10 KiB
ReStructuredText
367 lines
10 KiB
ReStructuredText
=====================
|
|
Task Trace User Guide
|
|
=====================
|
|
|
|
Installation
|
|
============
|
|
|
|
Install Trace Compass
|
|
---------------------
|
|
|
|
Task Trace uses the external tool `"Trace Compass" <https://www.eclipse.org/tracecompass/>`_ to display the trace result.
|
|
|
|
Download it from https://www.eclipse.org/tracecompass/ and install into the host environment.
|
|
After the installation, execute it and choose ``Tools`` -> ``add-ons`` menu, then select ``Install Extensions`` to install the extension named "Trace Compass ftrace (Incubation)".
|
|
|
|
NuttX kernel configuration
|
|
--------------------------
|
|
|
|
To enable the task trace function, the NuttX kernel configuration needs to be modified.
|
|
|
|
The following configurations must be enabled.
|
|
|
|
- ``CONFIG_SCHED_INSTRUMENTATION`` : Enables the feature of scheduler notes.
|
|
- ``CONFIG_SCHED_INSTRUMENTATION_FILTER`` : Enables the filter logic of the notes.
|
|
- ``CONFIG_SCHED_INSTRUMENTATION_SYSCALL`` : Enable system call instrumentation.
|
|
- ``CONFIG_SCHED_INSTRUMENTATION_IRQHANDLER`` : Enables IRQ instrumentation.
|
|
- ``CONFIG_DRIVER_NOTE`` : Enables note driver support.
|
|
- ``CONFIG_DRIVER_NOTERAM`` : Enables ``/dev/note`` in-memory buffering driver.
|
|
- ``CONFIG_DRIVER_NOTECTL`` : Enables ``/dev/notectl`` filter control driver.
|
|
- ``CONFIG_SYSTEM_TRACE`` : Enables "``trace``" command
|
|
- ``CONFIG_SYSTEM_SYSTEM`` : Enables "``system``" command (required by :ref:`trace_cmd`)
|
|
|
|
|
|
The following configurations are configurable parameters for trace.
|
|
|
|
- ``CONFIG_SCHED_INSTRUMENTATION_FILTER_DEFAULT_MODE``
|
|
|
|
- Specify the default filter mode.
|
|
If the following bits are set, the corresponding instrumentations are enabled on boot.
|
|
|
|
- Bit 0 = Enable instrumentation
|
|
- Bit 1 = Enable syscall instrumentation
|
|
- Bit 2 = Enable IRQ instrumentation
|
|
- Bit 3 = Enable collecting syscall arguments
|
|
|
|
- ``CONFIG_SCHED_INSTRUMENTATION_HIRES``
|
|
|
|
- If enabled, use higher resolution system timer for instrumentation.
|
|
|
|
- ``CONFIG_DRIVER_NOTERAM_BUFSIZE``
|
|
|
|
- Specify the note buffer size in bytes.
|
|
Higher value can hold more note records, but consumes more kernel memory.
|
|
|
|
- ``CONFIG_DRIVER_NOTERAM_TASKNAME_BUFSIZE``
|
|
|
|
- Specify the task name buffer size in bytes.
|
|
The buffer is used to hold the name of the task during instrumentation.
|
|
Trace dump can find and show a task name corresponding to given pid in the instrumentation data by using this buffer.
|
|
If 0 is specified, this feature is disabled and trace dump shows only the name of the newly created task.
|
|
|
|
- ``CONFIG_DRIVER_NOTERAM_DEFAULT_NOOVERWRITE``
|
|
|
|
- If enabled, stop overwriting old notes in the circular buffer when the buffer is full by default.
|
|
This is useful to keep instrumentation data of the beginning of a system boot.
|
|
|
|
After the configuration, rebuild the NuttX kernel and application.
|
|
|
|
If the trace function is enabled, "``trace``" :doc:`../applications/nsh/builtin` will be available.
|
|
|
|
How to get trace data
|
|
=====================
|
|
|
|
The trace function can be controlled by "``trace``" command.
|
|
|
|
Quick Guide
|
|
-----------
|
|
|
|
Getting the trace
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
Trace is started by the following command.
|
|
|
|
|
|
.. code-block::
|
|
|
|
nsh> trace start
|
|
|
|
Trace is stopped by the following command.
|
|
|
|
.. code-block::
|
|
|
|
nsh> trace stop
|
|
|
|
If you want to get the trace while executing some command, the following command can be used.
|
|
|
|
.. code-block::
|
|
|
|
nsh> trace cmd <command> [<args>...]
|
|
|
|
|
|
Displaying the trace result
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
The trace result is accumulated in the memory.
|
|
After getting the trace, the following command displays the accumulated trace data to the console.
|
|
|
|
.. code-block::
|
|
|
|
nsh> trace dump
|
|
|
|
This will be get the trace results like the followings:
|
|
|
|
.. code-block::
|
|
|
|
<noname>-1 [0] 7.640000000: sys_close()
|
|
<noname>-1 [0] 7.640000000: sys_close -> 0
|
|
<noname>-1 [0] 7.640000000: sys_sched_lock()
|
|
<noname>-1 [0] 7.640000000: sys_sched_lock -> 0
|
|
<noname>-1 [0] 7.640000000: sys_nxsched_get_stackinfo()
|
|
<noname>-1 [0] 7.640000000: sys_nxsched_get_stackinfo -> 0
|
|
<noname>-1 [0] 7.640000000: sys_sched_unlock()
|
|
<noname>-1 [0] 7.640000000: sys_sched_unlock -> 0
|
|
<noname>-1 [0] 7.640000000: sys_clock_nanosleep()
|
|
<noname>-1 [0] 7.640000000: sched_switch: prev_comm=<noname> prev_pid=1 prev_state=S ==> next_comm=<noname> next_pid=0
|
|
<noname>-0 [0] 7.640000000: irq_handler_entry: irq=11
|
|
<noname>-0 [0] 7.640000000: irq_handler_exit: irq=11
|
|
<noname>-0 [0] 7.640000000: irq_handler_entry: irq=15
|
|
<noname>-0 [0] 7.650000000: irq_handler_exit: irq=15
|
|
<noname>-0 [0] 7.650000000: irq_handler_entry: irq=15
|
|
:
|
|
|
|
|
|
By using the logging function of your terminal software, the trace result can be saved into the host environment and it can be used as the input for `"Trace Compass" <https://www.eclipse.org/tracecompass/>`_.
|
|
|
|
If the target has a storage, the trace result can be stored into the file by using the following command.
|
|
It also can be used as the input for "Trace Compass" by transferring the file in the target device to the host.
|
|
|
|
.. code-block::
|
|
|
|
nsh> trace dump <file name>
|
|
|
|
|
|
To display the trace result by `"Trace Compass" <https://www.eclipse.org/tracecompass/>`_, choose ``File`` -> ``Open Trace`` menu to specify the trace data file name.
|
|
|
|
.. image:: image/trace-compass-screenshot.png
|
|
|
|
|
|
Trace command description
|
|
=========================
|
|
|
|
.. _trace_start:
|
|
|
|
trace start
|
|
-----------
|
|
|
|
Start task tracing
|
|
|
|
**Command Syntax:**
|
|
|
|
.. code-block::
|
|
|
|
trace start [-c][<duration>]
|
|
|
|
- ``-c`` : Continue the previous trace.
|
|
The trace data is not cleared before starting new trace.
|
|
|
|
- ``<duration>`` : Specify the duration of the trace by seconds.
|
|
Task tracing is stopped after the specified period.
|
|
If not specified, the tracing continues until stopped by the command.
|
|
|
|
.. _trace_stop:
|
|
|
|
trace stop
|
|
----------
|
|
|
|
Stop task tracing
|
|
|
|
**Command Syntax:**
|
|
|
|
.. code-block::
|
|
|
|
trace stop
|
|
|
|
.. _trace_cmd:
|
|
|
|
trace cmd
|
|
---------
|
|
|
|
Get the trace while running the specified command.
|
|
After the termination of the command, task tracing is stopped.
|
|
To use this command, ``CONFIG_SYSTEM_SYSTEM`` needs to be enabled.
|
|
|
|
**Command Syntax:**
|
|
|
|
.. code-block::
|
|
|
|
trace cmd [-c] <command> [<args>...]
|
|
|
|
|
|
- ``-c`` : Continue the previous trace.
|
|
The trace data is not cleared before starting new trace.
|
|
|
|
- ``<command>`` : Specify the command to get the task trace.
|
|
|
|
- ``<args>`` : Arguments for the command.
|
|
|
|
**Example:**
|
|
|
|
.. code-block::
|
|
|
|
nsh> trace cmd sleep 1
|
|
|
|
.. _trace_dump:
|
|
|
|
trace dump
|
|
----------
|
|
|
|
Output the trace result.
|
|
If the task trace is running, it is stopped before the output.
|
|
|
|
**Command Syntax:**
|
|
|
|
.. code-block::
|
|
|
|
trace dump [-c][<filename>]
|
|
|
|
- ``-c`` : Not stop tracing before the output.
|
|
Because dumping trace itself is a task activity and new trace data is added while output, the dump will never stop.
|
|
|
|
- ``<filename>`` : Specify the filename to save the trace result.
|
|
If not specified, the trace result is displayed to console.
|
|
|
|
|
|
.. _trace_mode:
|
|
|
|
trace mode
|
|
----------
|
|
|
|
Set the task trace mode options.
|
|
The default value is given by the kernel configuration ``CONFIG_SCHED_INSTRUMENTATION_FILTER_DEFAULT_MODE``.
|
|
|
|
**Command Syntax:**
|
|
|
|
.. code-block::
|
|
|
|
trace mode [{+|-}{o|s|a|i}...]
|
|
|
|
- ``+o`` : Enable overwrite mode.
|
|
The trace buffer is a ring buffer and it can overwrite old data if no free space is available in the buffer.
|
|
Enables this behavior.
|
|
|
|
- ``-o`` : Disable overwrite mode.
|
|
The new trace data will be disposed when the buffer is full.
|
|
This is useful to keep the data of the beginning of the trace.
|
|
|
|
- ``+s`` : Enable system call trace.
|
|
It records the event of enter/leave system call which is issued by the application.
|
|
All system calls are recorded by default. ``trace syscall`` command can filter the system calls to be recorded.
|
|
|
|
- ``-s`` : Disable system call trace.
|
|
|
|
- ``+a`` : Enable recording the system call arguments.
|
|
It records the arguments passed to the issued system call to the trace data.
|
|
|
|
- ``-a`` : Disable recording the system call arguments.
|
|
|
|
- ``+i`` : Enable interrupt trace.
|
|
It records the event of enter/leave interrupt handler which is occured while the tracing.
|
|
All IRQs are recorded by default. ``trace irq`` command can filter the IRQs to be recorded.
|
|
|
|
- ``-i`` : Disable interrupt trace.
|
|
|
|
If no command parameters are specified, display the current mode as the follows.
|
|
|
|
**Example:**
|
|
|
|
.. code-block::
|
|
|
|
nsh> trace mode
|
|
Task trace mode:
|
|
Trace : enabled
|
|
Overwrite : on (+o)
|
|
Syscall trace : on (+s)
|
|
Filtered Syscalls : 16
|
|
Syscall trace with args : on (+a)
|
|
IRQ trace : on (+i)
|
|
Filtered IRQs : 2
|
|
|
|
.. _trace_syscall:
|
|
|
|
trace syscall
|
|
-------------
|
|
|
|
Configure the filter of the system call trace.
|
|
|
|
**Command Syntax:**
|
|
|
|
.. code-block::
|
|
|
|
trace syscall [{+|-}<syscallname>...]
|
|
|
|
- ``+<syscallname>`` : Add the specified system call name to the filter.
|
|
The execution of the filtered system call is not recorded into the trace data.
|
|
|
|
- ``-<syscallname>`` : Remove the specified system call name from the filter.
|
|
|
|
Wildcard "``*``" can be used to specify the system call name.
|
|
For example, "``trace syscall +sem_*``" filters the system calls begin with "``sem_``", such as ``sem_post()``, ``sem_wait()``,...
|
|
|
|
If no command parameters are specified, display the current filter settings as the follows.
|
|
|
|
**Example:**
|
|
|
|
.. code-block:: console
|
|
|
|
nsh> trace syscall
|
|
Filtered Syscalls: 16
|
|
getpid
|
|
sem_destroy
|
|
sem_post
|
|
sem_timedwait
|
|
sem_trywait
|
|
sem_wait
|
|
mq_close
|
|
mq_getattr
|
|
mq_notify
|
|
mq_open
|
|
mq_receive
|
|
mq_send
|
|
mq_setattr
|
|
mq_timedreceive
|
|
mq_timedsend
|
|
mq_unlink
|
|
|
|
.. _trace_irq:
|
|
|
|
trace irq
|
|
---------
|
|
|
|
Configure the filter of the interrupt trace.
|
|
|
|
**Command Syntax:**
|
|
|
|
.. code-block::
|
|
|
|
trace irq [{+|-}<irqnum>...]
|
|
|
|
- ``+<irqnum>`` : Add the specified IRQ number to the filter.
|
|
The execution of the filtered IRQ handler is not recorded into the trace data.
|
|
|
|
- ``-<irqnum>`` : Remove the specified IRQ number from the filter.
|
|
|
|
Wildcard "``*``" can be used to specify all IRQs.
|
|
|
|
If no command parameters are specified, display the current filter settings as the follows.
|
|
|
|
**Example:**
|
|
|
|
.. code-block:: console
|
|
|
|
nsh> trace irq
|
|
Filtered IRQs: 2
|
|
11
|
|
15
|
|
|