236 lines
8.5 KiB
Plaintext
236 lines
8.5 KiB
Plaintext
Architecture-Specific Code
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
Table of Contents
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
o Architecture-Specific Code
|
|
o Summary of Files
|
|
o Supported Architectures
|
|
o Configuring NuttX
|
|
|
|
Architecture-Specific Code
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
The NuttX configuration consists of:
|
|
|
|
o Processor architecture specific files. These are the files contained
|
|
in the arch/<arch-name>/ directory discussed in this README.
|
|
|
|
o Chip/SoC specific files. Each processor processor architecture
|
|
is embedded in chip or System-on-a-Chip (SoC) architecture. The
|
|
full chip architecture includes the processor architecture plus
|
|
chip-specific interrupt logic, general purpose I/O (GIO) logic, and
|
|
specialized, internal peripherals (such as UARTs, USB, etc.).
|
|
|
|
These chip-specific files are contained within chip-specific
|
|
sub-directories in the arch/<arch-name>/ directory and are selected
|
|
via the CONFIG_ARCH_name selection
|
|
|
|
o Board specific files. In order to be usable, the chip must be
|
|
contained in a board environment. The board configuration defines
|
|
additional properties of the board including such things as
|
|
peripheral LEDs, external peripherals (such as network, USB, etc.).
|
|
|
|
These board-specific configuration files can be found in the
|
|
configs/<board-name>/ sub-directories.
|
|
|
|
This README will address the processor architecture specific files
|
|
that are contained in the arch/<arch-name>/ directory. The file
|
|
include/nuttx/arch.h identifies all of the APIs that must
|
|
be provided by this architecture specific logic. (It also includes
|
|
arch/<arch-name>/arch.h as described below).
|
|
|
|
Directory Structure
|
|
^^^^^^^^^^^^^^^^^^^
|
|
|
|
The arch directory contains architecture specific logic. The complete
|
|
board port in is defined by the architecture-specific code in this
|
|
directory (plus the board-specific configurations in the config/
|
|
subdirectory). Each architecture must provide a subdirectory <arch-name>
|
|
under arch/ with the following characteristics:
|
|
|
|
|
|
<arch-name>/
|
|
|-- include/
|
|
| |--<chip-name>/
|
|
| | `-- (chip-specific header files)
|
|
| |--<other-chips>/
|
|
| |-- arch.h
|
|
| |-- irq.h
|
|
| `-- types.h
|
|
`-- src/
|
|
|--<chip-name>/
|
|
| `-- (chip-specific source files)
|
|
|--<other-chips>/
|
|
|-- Makefile
|
|
`-- (architecture-specific source files)
|
|
|
|
Summary of Files
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
include/<chip-name>/
|
|
This sub-directory contains chip-specific header files.
|
|
|
|
include/arch.h
|
|
This is a hook for any architecture specific definitions that may
|
|
be needed by the system. It is included by include/nuttx/arch.h
|
|
|
|
include/types.h
|
|
This provides architecture/toolchain-specific definitions for
|
|
standard types. This file should typedef:
|
|
|
|
sbyte, ubyte, uint8, boolean, sint16, uint16, sint32, uint32
|
|
|
|
and
|
|
|
|
sint64, uint64
|
|
|
|
if the architecture supports 64-bit integers.
|
|
|
|
irqstate_t
|
|
|
|
Must be defined to the be the size required to hold the interrupt
|
|
enable/disable state.
|
|
|
|
This file will be included by include/sys/types.h and be made
|
|
available to all files.
|
|
|
|
include/irq.h
|
|
This file needs to define some architecture specific functions (usually
|
|
inline if the compiler supports inlining) and structure. These include:
|
|
|
|
- struct xcptcontext. This structures represents the saved context
|
|
of a thread.
|
|
|
|
- irqstate_t irqsave(void) -- Used to disable all interrupts.
|
|
|
|
- void irqrestore(irqstate_t flags) -- Used to restore interrupt
|
|
enables to the same state as before irqsave was called.
|
|
|
|
This file must also define NR_IRQS, the total number of IRQs supported
|
|
by the board.
|
|
|
|
src/<chip-name>/
|
|
This sub-directory contains chip-specific source files.
|
|
|
|
src/Makefile
|
|
This makefile will be executed to build the targets src/libup.a and
|
|
src/up_head.o. The up_head.o file holds the entry point into the system
|
|
(power-on reset entry point, for example). It will be used in
|
|
the final link with libup.a and other system archives to generate the
|
|
final executable.
|
|
|
|
Supported Architectures
|
|
^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
arch/sim - Linux/Cygwin simulation
|
|
A user-mode port of NuttX to the x86 Linux platform is available.
|
|
The purpose of this port is primarily to support OS feature development.
|
|
This port does not support interrupts or a real timer (and hence no
|
|
round robin scheduler) Otherwise, it is complete.
|
|
|
|
arch/arm - ARM-based micro-controllers
|
|
This directory holds common ARM architectures. At present, this includes
|
|
the following subdirectories:
|
|
|
|
arch/arm/include and arch/arm/src/common
|
|
Common ARM/Cortex-M3 logic.
|
|
|
|
arch/arm/src/arm and arch/arm/include/arm
|
|
Common ARM-specific logic
|
|
|
|
arch/arm/src/cortexm3 and arch/arm/include/cortexm3
|
|
Common Cortex-M3 logic
|
|
|
|
arch/arm/include/c5471 and arch/arm/src/c5471
|
|
TI TMS320C5471 (also called TMS320DM180 or just C5471).
|
|
NuttX operates on the ARM7 of this dual core processor. This port
|
|
complete, verified, and included in the NuttX release 0.1.1.
|
|
|
|
arch/arm/include/dm320 and arch/arm/src/dm320
|
|
TI TMS320DM320 (also called just DM320).
|
|
NuttX operates on the ARM9EJS of this dual core processor. This port
|
|
complete, verified, and included in the NuttX release 0.2.1.
|
|
|
|
arch/arm/include/lm3s and arch/arm/src/lm3s
|
|
These directories contain support for the Luminary LMS family, particularly
|
|
for the LM3S6918. The initial, release of this port was included in NuttX version
|
|
0.4.6. The current port includes timer, serial console, Ethernet, SSI, and microSD
|
|
support. There are working configurations the NuttX OS test, to run the NuttShell
|
|
(NSH), the NuttX networking test, and the uIP web server.
|
|
|
|
arch/arm/include/lpc214x and arch/arm/src/lpc214x
|
|
These directories provide support for NXP LPC214x family of
|
|
processors. This port boots and passes the OS test (examples/ostest).
|
|
The port is complete and verifed. As of NuttX 0.3.17, the port includes:
|
|
timer interrupts, serial console, USB driver, and SPI-based MMC/SD card
|
|
support. A verifed NuttShell (NSH) configuration is also available.
|
|
|
|
arch/arm/include/stm32 and arch/arm/src/stm32
|
|
These directories contain support for the STMicro STM32 family, particularly
|
|
for the STM32F103ZET6. The initial, release of this port was included in NuttX version
|
|
0.4.12. The current port includes timer, and serial console. Work is underway for
|
|
USB, SPI, microSD, and LCD.
|
|
|
|
arch/arm/include/str71x and arch/arm/src/str71x
|
|
These directories provide support for the STMicro STR71x processors.
|
|
Coding is complete on the basic port (boot logic, system time, serial console),
|
|
but no testing has been performed due to some problems I am having with my
|
|
JTAG wiggler and OpenOCD on Linux.
|
|
|
|
arch/m68322
|
|
A work in progress.
|
|
STATUS: Stalled for the moment.
|
|
|
|
arch/sh - SuperH and related Hitachi/Renesas microcontrollers
|
|
|
|
arch/sh/include and arch/sh/src/common
|
|
Common SuperH logic.
|
|
|
|
arch/sh/include/shs and arch/sh/src/sh1
|
|
Support for the SH-1 processor.
|
|
|
|
arch/pjrc-8051 - 8051/52 microcontrollers
|
|
8051 Microcontroller. This port is not quite ready for prime time.
|
|
|
|
arch/z16 - ZiLOG 16-bit processors
|
|
This directory holds related, 16-bit architectures from ZiLOG. At
|
|
present, this includes the following subdirectories:
|
|
|
|
arch/z16/include and arch/z16/src/common
|
|
Common microcontroller logic.
|
|
|
|
arch/z16/include/z16f and arch/z16/src/z16f
|
|
ZiLOG z16f Microcontroller.
|
|
STATUS: Released in nuttx-0.3.7. Fully functional other than issues
|
|
addressed in ${TOPDIR}/TODO.
|
|
|
|
arch/z80 - ZiLOG 8-bit microcontrollers
|
|
This directory holds related, 8-bit architectures from ZiLOG. At
|
|
present, this includes the following subdirectories:
|
|
|
|
arch/z80/include and arch/z80/src/common
|
|
Common microcontroller logic.
|
|
|
|
arch/z80/include/z80 and arch/z80/src/z80
|
|
Classic ZiLOG z80 Microcontroller.
|
|
STATUS: Functional with no known defects. There are still several
|
|
OS features that have not yet been tested (e.g., networking).
|
|
|
|
arch/z80/include/z8 and arch/z80/src/z8
|
|
ZiLOG Z8Encore! Microcontroller
|
|
|
|
arch/z80/include/ez80 and arch/z80/src/ez80
|
|
ZiLOG ez80 Acclaim! Microcontroller
|
|
|
|
The following architecture directories are deprecated. They have been
|
|
replaced by the logic in arm/arm and will deleted at some point in the
|
|
future.
|
|
|
|
arch/c5471
|
|
Replaced with arch/arm/include/c5471 and arch/arm/src/c5471
|
|
|
|
arch/dm320
|
|
Replaced with arch/arm/include/dm320 and arch/arm/src/dm320
|
|
|