incubator-nuttx/boards/z80/ez80/makerlisp/scripts/makerlisp_ram.linkcmd

98 lines
4.5 KiB
Plaintext

/****************************************************************************/
/* boards/z80/ez80/makerlisp/scripts/makerlisp_ram.linkcmd */
/* For configurations running entirely out of RAM with nothing in FLASH */
/* */
/* Copyright (C) 2019 Gregory Nutt. All rights reserved. */
/* Author: Gregory Nutt <gnutt@nuttx.org> */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* 1. Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* 2. Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in */
/* the documentation and/or other materials provided with the */
/* distribution. */
/* 3. Neither the name NuttX nor the names of its contributors may be */
/* used to endorse or promote products derived from this software */
/* without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS */
/* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT */
/* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS */
/* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE */
/* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, */
/* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS */
/* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED */
/* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT */
/* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN */
/* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE */
/* POSSIBILITY OF SUCH DAMAGE. */
/* */
/****************************************************************************/
-FORMAT=OMF695,INTEL32
-map -maxhexlen=64 -quiet -warnoverlap -xref -unresolved=fatal
-sort NAME=ascending -warn -debug -NOigcase
RANGE ROM $000000 : $03FFFF
RANGE RAM $040000 : $13FFFF
RANGE EXTIO $000000 : $00FFFF
RANGE INTIO $000000 : $0000FF
CHANGE .RESET is RAM
CHANGE .STARTUP is RAM
CHANGE TEXT is CODE
CHANGE CODE is RAM
CHANGE STRSECT is CODE
ORDER .RESET,.IVECTS,.STARTUP,CODE,DATA
DEFINE __low_romdata = copy base of DATA
DEFINE __low_data = base of DATA
DEFINE __len_data = length of DATA
DEFINE __low_bss = base of BSS
DEFINE __len_bss = length of BSS
DEFINE __stack = highaddr of RAM + 1
DEFINE __heaptop = highaddr of RAM
DEFINE __heapbot = top of RAM + 1
DEFINE __low_romcode = copy base of CODE
DEFINE __low_code = base of CODE
DEFINE __len_code = length of CODE
DEFINE __copy_code_to_ram = 0
DEFINE __crtl = 1
DEFINE __CS0_LBR_INIT_PARAM = $04
DEFINE __CS0_UBR_INIT_PARAM = $0b
DEFINE __CS0_CTL_INIT_PARAM = $08
DEFINE __CS0_BMC_INIT_PARAM = $00
DEFINE __CS1_LBR_INIT_PARAM = $0c
DEFINE __CS1_UBR_INIT_PARAM = $13
DEFINE __CS1_CTL_INIT_PARAM = $08
DEFINE __CS1_BMC_INIT_PARAM = $00
DEFINE __CS2_LBR_INIT_PARAM = $20
DEFINE __CS2_UBR_INIT_PARAM = $9f
DEFINE __CS2_CTL_INIT_PARAM = $88
DEFINE __CS2_BMC_INIT_PARAM = $00
DEFINE __CS3_LBR_INIT_PARAM = $00
DEFINE __CS3_UBR_INIT_PARAM = $00
DEFINE __CS3_CTL_INIT_PARAM = $00
DEFINE __CS3_BMC_INIT_PARAM = $00
DEFINE __RAM_CTL_INIT_PARAM = $80
DEFINE __RAM_ADDR_U_INIT_PARAM = $AF
DEFINE __FLASH_CTL_INIT_PARAM = $88
DEFINE __FLASH_ADDR_U_INIT_PARAM = $00
define _SYS_CLK_FREQ = 50000000
define _OSC_FREQ = 5000000
define _SYS_CLK_SRC = 1
define _OSC_FREQ_MULT = 10
define __PLL_CTL0_INIT_PARAM = $41
define _zsl_g_clock_xdefine = 50000000
/* arch/z80/src/Makefile.zdsii will append target, object and library paths below */