incubator-nuttx/drivers/wireless/spirit/include/spirit_spi.h

251 lines
9.3 KiB
C

/******************************************************************************
* include/nuttx/wireless/spirit/include/spirit_spi.h
* Header file for NuttX SPIRIT SPI driver interface.
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
*
* Derives loosely from similarly licensed SPI interface definitions from
* STMicro:
*
* Copyright(c) 2015 STMicroelectronics
* Author: VMA division - AMS
* Version 3.2.2 08-July-2015
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
#ifndef __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_SPI_H
#define __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_SPI_H
/******************************************************************************
* Included Files
******************************************************************************/
#include "spirit_types.h"
/******************************************************************************
* Pre-processor Defintiions
******************************************************************************/
/* SPIRIT1 SPI Headers */
#define HEADER_WRITE_MASK 0x00 /* Write mask for header byte */
#define HEADER_READ_MASK 0x01 /* Read mask for header byte */
#define HEADER_ADDRESS_MASK 0x00 /* Address mask for header byte */
#define HEADER_COMMAND_MASK 0x80 /* Command mask for header byte */
#define LINEAR_FIFO_ADDRESS 0xff /* Linear FIFO address */
/* SPIRIT macros to construct headers */
#define __MKHEADER(a,rw) (a | rw)
#define WRITE_HEADER __MKHEADER(HEADER_ADDRESS_MASK, HEADER_WRITE_MASK)
#define READ_HEADER __MKHEADER(HEADER_ADDRESS_MASK, HEADER_READ_MASK)
#define COMMAND_HEADER __MKHEADER(HEADER_COMMAND_MASK, HEADER_WRITE_MASK)
/******************************************************************************
* Public Function Prototypes
******************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
struct spi_dev_s; /* Forward reference */
/******************************************************************************
* Name: spirit_reg_read
*
* Description:
* Read single or multiple SPIRIT1 register
*
* Input Parameters:
* regaddr: Base register's address to be read
* buffer: Pointer to the buffer of registers' values to be read
* buflen: Number of register values to be read
*
* Returned Value:
* Zero (OK) is returned on success. A negated errno value is returned on
* any failure. On success, spirit->state is updated.
*
******************************************************************************/
int spirit_reg_read(FAR struct spirit_library_s *spirit, uint8_t regaddr,
FAR uint8_t *buffer, unsigned int buflen);
/******************************************************************************
* Name: spirit_reg_write
*
* Description:
* Read single or multiple SPIRIT1 register.
*
* Input Parameters:
* spirit - Reference to an instance of the driver state structure.
* regaddr - Base register's address to write
* buffer - Pointer to the buffer of register values to write
* buflen - Number of registers values to be written.
*
* Returned Value:
* Zero (OK) is returned on success. A negated errno value is returned on
* any failure. On success, spirit->state is updated.
*
******************************************************************************/
int spirit_reg_write(FAR struct spirit_library_s *spirit, uint8_t regaddr,
FAR const uint8_t *buffer, unsigned int buflen);
/******************************************************************************
* Name: spirit_reg_modify
*
* Description:
* Perform atomic read/modify/write on a single SPIRIT1 register. This is
* atomic only in the sense that other accesses to the SPI bus are
* prohibited throughout the operation.
*
* Input Parameters:
* spirit - Reference to an instance of the driver state structure.
* regaddr - Base register's address to write
* clrbits - Bits to clear in the register
* setbits - Bits to set in the register
*
* Returned Value:
* Zero (OK) is returned on success. A negated errno value is returned on
* any failure. On success, spirit->state is updated.
*
******************************************************************************/
int spirit_reg_modify(FAR struct spirit_library_s *spirit, uint8_t regaddr,
uint8_t setbits, uint8_t clrbits);
/******************************************************************************
* Name: spirit_command
*
* Description:
* Send a command
*
* Input Parameters:
* spirit - Reference to an instance of the driver state structure.
* cmd - Command code to be sent
*
* Returned Value:
* Zero (OK) is returned on success. A negated errno value is returned on
* any failure. On success, spirit->state is updated.
*
******************************************************************************/
int spirit_command(FAR struct spirit_library_s *spirit, uint8_t cmd);
/******************************************************************************
* Name: spirit_fifo_read
*
* Description:
* Read data from RX FIFO
*
* Input Parameters:
* spirit - Reference to an instance of the driver state structure.
* buffer - Pointer to the buffer of data values to write
* buflen - Number of bytes to be written
*
* Returned Value:
* Zero (OK) is returned on success. A negated errno value is returned on
* any failure. On success, spirit->state is updated.
*
******************************************************************************/
int spirit_fifo_read(FAR struct spirit_library_s *spirit, FAR uint8_t *buffer,
unsigned int buflen);
/******************************************************************************
* Name: spirit_fifo_write
*
* Description:
* Write data into TX FIFO.
*
* Input Parameters:
* spirit - Reference to an instance of the driver state structure.
* buffer - Pointer to the buffer of data values to write
* buflen - Number of data values to be written.
*
* Returned Value:
* Zero (OK) is returned on success. A negated errno value is returned on
* any failure. On success, spirit->state is updated.
*
******************************************************************************/
int spirit_fifo_write(FAR struct spirit_library_s *spirit,
FAR const uint8_t *buffer, unsigned int buflen);
/******************************************************************************
* Name: spirit_update_status
*
* Description:
* Updates the state field in the driver instance by reading the MC_STATE
* register of SPIRIT.
*
* Input Parameters:
* spirit - Reference to an instance of the driver state structure.
*
* Returned Value:
* Zero (OK) is returned on success. A negated errno value is returned on
* any failure. On success, spirit->state is updated.
*
******************************************************************************/
int spirit_update_status(FAR struct spirit_library_s *spirit);
/****************************************************************************
* Name: spirit_waitstatus
*
* Description:
* Poll until the Spirit status is the requested value or until a timeout
* occurs.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* state - That that we are waiting for.
* msec - Timeout in millisedonds
*
* Returned Value:
* OK on success; a negated errno on a timeout
*
* Assumptions:
* We have exclusive access to the driver state and to the spirit library.
*
****************************************************************************/
int spirit_waitstatus(FAR struct spirit_library_s *spirit,
enum spirit_state_e state, unsigned int msec);
#ifdef __cplusplus
}
#endif
#endif /* __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_SPI_H */