incubator-nuttx/include/nuttx/analog/dac.h

213 lines
7.8 KiB
C

/************************************************************************************
* include/nuttx/analog/dac.h
*
* Copyright (C) 2011 Li Zhuoyi. All rights reserved.
* Author: Li Zhuoyi <lzyy.cn@gmail.com>
* History: 0.1 2011-08-04 initial version
*
* Derived from include/nuttx/can.h
*
* Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __INCLUDE_NUTTX_ANALOG_DAC_H
#define __INCLUDE_NUTTX_ANALOG_DAC_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <semaphore.h>
#include <nuttx/fs/fs.h>
#include <nuttx/spi/spi.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Default configuration settings that may be overridden in the board configuration.
* file. The configured size is limited to 255 to fit into a uint8_t.
*/
#if !defined(CONFIG_DAC_FIFOSIZE)
# define CONFIG_DAC_FIFOSIZE 8
#elif CONFIG_DAC_FIFOSIZE > 255
# undef CONFIG_DAC_FIFOSIZE
# define CONFIG_DAC_FIFOSIZE 255
#endif
/************************************************************************************
* Public Types
************************************************************************************/
struct dac_msg_s
{
uint8_t am_channel; /* The 8-bit DAC Channel */
int32_t am_data; /* DAC convert result (4 bytes) */
};
struct dac_fifo_s
{
sem_t af_sem; /* Counting semaphore */
uint8_t af_head; /* Index to the head [IN] index in the circular buffer */
uint8_t af_tail; /* Index to the tail [OUT] index in the circular buffer */
/* Circular buffer of CAN messages */
struct dac_msg_s af_buffer[CONFIG_DAC_FIFOSIZE];
};
/* This structure defines all of the operations providd by the architecture specific
* logic. All fields must be provided with non-NULL function pointers by the
* caller of dac_register().
*/
struct dac_dev_s;
struct dac_ops_s
{
/* Reset the DAC device. Called early to initialize the hardware. This
* is called, before ao_setup() and on error conditions.
*/
CODE void (*ao_reset)(FAR struct dac_dev_s *dev);
/* Configure the DAC. This method is called the first time that the DAC
* device is opened. This will occur when the port is first opened.
* This setup includes configuring and attaching DAC interrupts. Interrupts
* are all disabled upon return.
*/
CODE int (*ao_setup)(FAR struct dac_dev_s *dev);
/* Disable the DAC. This method is called when the DAC device is closed.
* This method reverses the operation the setup method.
*/
CODE void (*ao_shutdown)(FAR struct dac_dev_s *dev);
/* Call to enable or disable TX interrupts */
CODE void (*ao_txint)(FAR struct dac_dev_s *dev, bool enable);
/* This method will send one message on the DAC */
CODE int (*ao_send)(FAR struct dac_dev_s *dev, FAR struct dac_msg_s *msg);
/* All ioctl calls will be routed through this method */
CODE int (*ao_ioctl)(FAR struct dac_dev_s *dev, int cmd, unsigned long arg);
};
/* This is the device structure used by the driver. The caller of
* dac_register() must allocate and initialize this structure. The
* calling logic need only set all fields to zero except:
*
* The elements of 'ad_ops', and 'ad_priv'
*
* The common logic will initialize all semaphores.
*/
struct dac_dev_s
{
uint8_t ad_ocount; /* The number of times the device has been opened */
uint8_t ad_nchannel; /* Number of dac channel */
sem_t ad_closesem; /* Locks out new opens while close is in progress */
struct dac_fifo_s ad_xmit; /* Describes receive FIFO */
const struct dac_ops_s *ad_ops; /* Arch-specific operations */
void *ad_priv; /* Used by the arch-specific logic */
};
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/************************************************************************************
* Name: dac_register
*
* Description:
* Register a dac driver.
*
* Input Parameters:
* path - The full path to the DAC device to be registered. This could be, as an
* example, "/dev/dac0"
* dev - An instance of the device-specific DAC interface
*
* Returned Value:
* Zero on success; A negated errno value on failure.
*
************************************************************************************/
int dac_register(FAR const char *path, FAR struct dac_dev_s *dev);
/************************************************************************************
* Name: dac_txdone
*
* Description:
* Called from the DAC interrupt handler at the completion of a send operation.
*
* Input Parameters:
* dev - An instance of the device-specific DAC interface
*
* Return:
* OK on success; a negated errno on failure.
*
************************************************************************************/
int dac_txdone(FAR struct dac_dev_s *dev);
/************************************************************************************
* DAC Initialization functions
*
* Architecture-specific versions will have prototypes in architect-specific header
* files. Common DAC implementations in drivers/analog will have prototypes listed
* below.
*
************************************************************************************/
FAR struct dac_dev_s *up_ad5410initialize(FAR struct spi_dev_s *spi, unsigned int devno);
#if defined(__cplusplus)
}
#endif
#endif /* __INCLUDE_NUTTX_ANALOG_DAC_H */