576 lines
31 KiB
C
576 lines
31 KiB
C
/********************************************************************************************
|
||
* arch/mips/include/mips32/cp0.h
|
||
*
|
||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
*
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. Redistributions in binary form must reproduce the above copyright
|
||
* notice, this list of conditions and the following disclaimer in
|
||
* the documentation and/or other materials provided with the
|
||
* distribution.
|
||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
* used to endorse or promote products derived from this software
|
||
* without specific prior written permission.
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
* POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
********************************************************************************************/
|
||
|
||
#ifndef __ARCH_MIPS_INCLUDE_MIPS32_CP0_H
|
||
#define __ARCH_MIPS_INCLUDE_MIPS32_CP0_H
|
||
|
||
/********************************************************************************************
|
||
* Included Files
|
||
********************************************************************************************/
|
||
|
||
#include <nuttx/config.h>
|
||
|
||
/********************************************************************************************
|
||
* Pre-Processor Definitions
|
||
********************************************************************************************/
|
||
/* CP0 Register Addresses *******************************************************************/
|
||
|
||
#ifdef __ASSEMBLY__
|
||
# define MIPS32_CP0_INDEX1 $0,0 /* Index into the TLB array */
|
||
# define MIPS32_CP0_RANDOM1 $1,0 /* Randomly generated index into the TLB array */
|
||
# define MIPS32_CP0_ENTRYLO01 $2,0 /* LS TLB entry for even-numbered pages */
|
||
# define MIPS32_CP0_ENTRYLO11 $3,0 /* LS TLB entry for odd-numbered pages */
|
||
# define MIPS32_CP0_CONTEXT2 $4,0 /* Page table address */
|
||
# define MIPS32_CP0_PAGEMASK1 $5,0 /* Variable page sizes in TLB entries */
|
||
# define MIPS32_CP0_WIRED1 $6,0 /* umber of fixed (<28>wired<65>) TLB entries */
|
||
# define MIPS32_CP0_BADVADDR $8,0 /* Address of most recent exception */
|
||
# define MIPS32_CP0_COUNT $9,0 /* Processor cycle count */
|
||
# define MIPS32_CP0_ENTRYHI1 $10,0 /* High-order portion of the TLB entry */
|
||
# define MIPS32_CP0_COMPARE $11,0 /* Timer interrupt control */
|
||
# define MIPS32_CP0_STATUS $12,0 /* Processor status and control */
|
||
# define MIPS32_CP0_CAUSE $13,0 /* Cause of last general exception */
|
||
# define MIPS32_CP0_EPC $14,0 /* Program counter at last exception */
|
||
# define MIPS32_CP0_PRID $15,0 /* Processor identification and revision */
|
||
# define MIPS32_CP0_CONFIG $16,0 /* Configuration register */
|
||
# define MIPS32_CP0_CONFIG1 $16,1 /* Configuration register 1 */
|
||
# define MIPS32_CP0_CONFIG2 $16,2 /* Configuration register 3 */
|
||
# define MIPS32_CP0_CONFIG3 $16,2 /* Configuration register 3 */
|
||
# define MIPS32_CP0_LLADDR $17,0 /* Load linked address */
|
||
# define MIPS32_CP0_WATCHLO2 $18,0 /* LS Watchpoint address */
|
||
# define MIPS32_CP0_WATCHHI2 $19,0 /* MS Watchpoint address and mask */
|
||
# define MIPS32_CP0_DEBUG3 $23,0 /* Debug control and exception status */
|
||
# define MIPS32_CP0_DEPC3 $24,0 /* Program counter at last debug exception */
|
||
# define MIPS32_CP0_ERRCTL $26,0 /* Controls access data CACHE instruction */
|
||
# define MIPS32_CP0_TAGLO $28,0 /* LS portion of cache tag interface */
|
||
# define MIPS32_CP0_DATALO $28,1 /* LS portion of cache tag interface */
|
||
# define MIPS32_CP0_TAGHI $29,0 /* MS portion of cache tag interface */
|
||
# define MIPS32_CP0_DATAHI $29,1 /* MS portion of cache tag interface */
|
||
# define MIPS32_CP0_ERROREPC2 $30,0 /* Program counter at last error */
|
||
# define MIPS32_CP0_DESAVE3 $31,0 /* Debug handler scratchpad register */
|
||
#endif
|
||
|
||
/* CP0 Registers ****************************************************************************/
|
||
|
||
/* Register Number: 0 Sel: 0 Name: Index
|
||
* Function: Index into the TLB array
|
||
* Compliance Level: Required for TLB-based MMUs; Optional otherwise.
|
||
*/
|
||
|
||
#define CP0_INDEX_SHIFT (0) /* Bits 0-(n-1): TLB Index */
|
||
#define CP0_INDEX_MASK (0x7fffffff)
|
||
#define CP0_INDEX_P (1 << 31) /* Bit 31: Probe failure */
|
||
|
||
/* Register Number: 1 Sel: 0 Name: Random
|
||
* Function: Randomly generated index into the TLB array
|
||
* Compliance Level: Required for TLB-based MMUs; Optional otherwise.
|
||
*
|
||
* This is a 32-bit register containing a random TLB index. The valid width is some fixed
|
||
* number, 'n', but the upper bits are padded so that no fields need be defined for this
|
||
* register.
|
||
*/
|
||
|
||
/* Register Number: 2 Sel: 0 Name: EntryLo0
|
||
* Function: Low-order portion of the TLB entry for even-numbered virtual pages
|
||
* Compliance Level: EntryLo0 is Required for a TLB-based MMU; Optional
|
||
* otherwise.
|
||
*
|
||
* Register Number: 3 Sel: 0 Name: EntryLo1
|
||
* Function: Low-order portion of the TLB entry for odd-numbered virtual pages
|
||
* Compliance Level: EntryLo1 is Required for a TLB-based MMU; Optional otherwise.
|
||
*/
|
||
|
||
#define CP0_ENTRYLO_G (1 << 0) /* Bit 0: Global bit */
|
||
#define CP0_ENTRYLO_V (1 << 1) /* Bit 1: Valild bit */
|
||
#define CP0_ENTRYLO_D (1 << 2) /* Bit 2: Dirty bit */
|
||
#define CP0_ENTRYLO_C_SHIFT (3) /* Bits 3-5: Coherency attribute */
|
||
#define CP0_ENTRYLO_C_MASK (7 << CP0_ENTRYLO_CSHIFT)
|
||
# define CP0_ENTRYLO_UNCACHED (2 << CP0_ENTRYLO_CSHIFT)
|
||
# define CP0_ENTRYLO_CACHEABLE (3 << CP0_ENTRYLO_CSHIFT)
|
||
#define CP0_ENTRYLO_PFN_SHIFT (6) /* Bits 6-29: Page frame number */
|
||
#define CP0_ENTRYLO_PFN_MASK (0x00ffffff << CP0_ENTRYLO_CSHIFT)
|
||
|
||
/* Register Number: 4 Sel: 0 Name: Context
|
||
* Function: Pointer to page table entry in memory
|
||
* Compliance Level: Required for TLB-based MMUs; Optional otherwise.
|
||
*/
|
||
|
||
#define CP0_CONTEXT_BADVPN2_SHIFT (4) /* Bits 4-22: Virtual address that cause an excpetion */
|
||
#define CP0_CONTEXT_BADVPN2_MASK (0x0007ffff << CP0_CONTEXT_BADVPN2_SHIFT)
|
||
#define CP0_CONTEXT_PTEBASE_SHIFT (23) /* Bits 23-31: Page table base address */
|
||
#define CP0_CONTEXT_PTEBASE_MASK (0x000001ff << CP0_CONTEXT_PTEBASE_SHIFT)
|
||
|
||
/* Register Number: 5 Sel: 0 Name: PageMask
|
||
* Function: Control for variable page size in TLB entries.
|
||
* Compliance Level: Required for TLB-based MMUs; Optional otherwise.
|
||
*/
|
||
|
||
#define CP0_PAGEMASK_SHIFT (13) /* Bits 13-28: Page mask */
|
||
#define CP0_PAGEMASK_MASK (0xffff << CP0_PAGEMASK_SHIFT)
|
||
# define CP0_PAGEMASK_4KB (0x0000 << CP0_PAGEMASK_SHIFT)
|
||
# define CP0_PAGEMASK_16KB (0x0003 << CP0_PAGEMASK_SHIFT)
|
||
# define CP0_PAGEMASK_64KB (0x000f << CP0_PAGEMASK_SHIFT)
|
||
# define CP0_PAGEMASK_256KB (0x003f << CP0_PAGEMASK_SHIFT)
|
||
# define CP0_PAGEMASK_1MB (0x00ff << CP0_PAGEMASK_SHIFT)
|
||
# define CP0_PAGEMASK_4MB (0x03ff << CP0_PAGEMASK_SHIFT)
|
||
# define CP0_PAGEMASK_16MB (0x0fff << CP0_PAGEMASK_SHIFT)
|
||
# define CP0_PAGEMASK_64MB (0x3fff << CP0_PAGEMASK_SHIFT)
|
||
# define CP0_PAGEMASK_256MB (0xffff << CP0_PAGEMASK_SHIFT)
|
||
|
||
/* Register Number: 6 Sel: 0 Name: Wired
|
||
* Function: Controls the number of fixed (<28>wired<65>) TLB entries
|
||
* Compliance Level: Required for TLB-based MMUs; Optional otherwise.
|
||
*
|
||
* This is a 32-bit register containing the TLB wired boundary. The valid width is some
|
||
* fixed number, 'n', but the upper bits are padded so that no fields need be defined for
|
||
* this register.
|
||
*
|
||
* Register Number: 7 Sel: all (Reserved for future extensions)
|
||
*
|
||
* Register Number: 8 Sel: 0 Name: BadVAddr
|
||
* Function: Reports the address for the most recent address-related exception
|
||
* Compliance Level: Required.
|
||
*
|
||
* This register contains a 32-bit address value; No fields need be defined for this
|
||
* register.
|
||
*
|
||
* Register Number: 9 Sel: 0 Name: Count
|
||
* Function: Processor cycle count
|
||
* Compliance Level: Required.
|
||
*
|
||
* This register contains a 32-bit count value; No fields need be defined for this
|
||
* register.
|
||
*
|
||
* Register Number: 9 Sel: 6-7 (Available for implementation dependent user)
|
||
*/
|
||
|
||
/* Register Number: 10 Sel: 0 Name: EntryHi
|
||
* Function: High-order portion of the TLB entry
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
*/
|
||
|
||
#define CP0_ENTRYHI_ASID_SHIFT (0) /* Bits 0-7: Address space identifier */
|
||
#define CP0_ENTRYHI_ASID_MASK (0xff << CP0_ENTRYHI_ASID_SHIFT)
|
||
#define CP0_ENTRYHI_VPN2_SHIFT (13) /* Bits 13-31: Virtual address */
|
||
#define CP0_ENTRYHI_VPN2_MASK (0x0007ffff << CP0_ENTRYHI_VPN2_SHIFT)
|
||
|
||
/* Register Number: 11 Sel: 0 Name: Compare
|
||
* Function: Timer interrupt control
|
||
* Compliance Level: Required.
|
||
*
|
||
* This register contains a 32-bit compare value; No fields need be defined for this
|
||
* register.
|
||
*
|
||
* Register Number: 11 Sel: 6-7 (Available for implementation dependent user)
|
||
*/
|
||
|
||
/* Register Number: 12 Sel: 0 Name: Status
|
||
* Function: Processor status and control
|
||
* Compliance Level: Required.
|
||
*/
|
||
|
||
#define CP0_STATUS_IE (1 << 0) /* Bit 0: Interrupt Enable */
|
||
#define CP0_STATUS_EXL (1 << 1) /* Bit 1: Exception Level */
|
||
#define CP0_STATUS_ERL (1 << 2) /* Bit 2: Error Level */
|
||
#define CP0_STATUS_KSU_SHIFT (3) /* Bits 3-4: Operating mode (with supervisor mode) */
|
||
#define CP0_STATUS_KSU_MASK (3 << CP0_STATUS_KSU_SHIFT)
|
||
# define CP0_STATUS_KSU_KERNEL (0 << CP0_STATUS_KSU_SHIFT)
|
||
# define CP0_STATUS_KSU_SUPER (1 << CP0_STATUS_KSU_SHIFT)
|
||
# define CP0_STATUS_KSU_USER (2 << CP0_STATUS_KSU_SHIFT)
|
||
#define CP0_STATUS_UM (1 << 4) /* Bit 4: Operating mode == USER (No supervisor mode) */
|
||
#define CP0_STATUS_UX (1 << 5) /* Bit 5: Enables 64-bit user address space (Not MIPS32) */
|
||
#define CP0_STATUS_SX (1 << 6) /* Bit 6: Enables 64-bit supervisor address space (Not MIPS32) */
|
||
#define CP0_STATUS_KX (1 << 7) /* Bit 7: Enables 64-bit kernel address space (Not MIPS32) */
|
||
#define CP0_STATUS_IM_SHIFT (8) /* Bits 8-15: Interrupt Mask */
|
||
#define CP0_STATUS_IM_MASK (0xff << CP0_STATUS_IM_SHIFT)
|
||
# define CP0_STATUS_IM_SWINTS (0x03 << CP0_STATUS_IM_SHIFT) /* IM0-1 = Software interrupts */
|
||
# define CP0_STATUS_IM0 (0x01 << CP0_STATUS_IM_SHIFT)
|
||
# define CP0_STATUS_IM1 (0x02 << CP0_STATUS_IM_SHIFT)
|
||
# define CP0_STATUS_IM_HWINTS (0x7c << CP0_STATUS_IM_SHIFT) /* IM2-6 = Hardware interrupts */
|
||
# define CP0_STATUS_IM2 (0x04 << CP0_STATUS_IM_SHIFT)
|
||
# define CP0_STATUS_IM3 (0x08 << CP0_STATUS_IM_SHIFT)
|
||
# define CP0_STATUS_IM4 (0x10 << CP0_STATUS_IM_SHIFT)
|
||
# define CP0_STATUS_IM5 (0x20 << CP0_STATUS_IM_SHIFT)
|
||
# define CP0_STATUS_IM6 (0x40 << CP0_STATUS_IM_SHIFT)
|
||
# define CP0_STATUS_IM_TIMER (0x80 << CP0_STATUS_IM_SHIFT) /* IM7 = Hardware/Timer/Perf interrupts */
|
||
# define CP0_STATUS_IM7 (0x80 << CP0_STATUS_IM_SHIFT)
|
||
# define CP0_STATUS_IM_ALL (0xff << CP0_STATUS_IM_SHIFT)
|
||
#define CP0_STATUS_IMPL_SHIFT (16) /* Bits 16-17: Implementation dependent */
|
||
#define CP0_STATUS_IMPL_MASK (3 << CP0_STATUS_IMPL_SHIFT)
|
||
#define CP0_STATUS_NMI (1 << 19) /* Bit 19: Reset exception due to an NMI */
|
||
#define CP0_STATUS_SR (1 << 20) /* Bit 20: Reset exception due to a Soft Reset */
|
||
#define CP0_STATUS_TS (1 << 21) /* Bit 21: TLB detected match on multiple entries */
|
||
#define CP0_STATUS_BEV (1 << 22) /* Bit 22: Location of exception vectors 1->Bootstrap */
|
||
#define CP0_STATUS_PX (1 << 23) /* Bit 23: Enables 64-bit operations (Not MIPS32) */
|
||
#define CP0_STATUS_MX (1 << 24) /* Bit 24: Enables MDMX<4D> (Not MIPS32) */
|
||
#define CP0_STATUS_RE (1 << 25) /* Bit 25: Enable reverse-endian memory in user mode */
|
||
#define CP0_STATUS_FR (1 << 26) /* Bit 26: Controls the floating point register mode (Not MIPS32) */
|
||
#define CP0_STATUS_RP (1 << 27) /* Bit 27: Enables reduced power mode */
|
||
#define CP0_STATUS_CU0 (1 << 28) /* Bit 28: Controls access to coprocessor 0 */
|
||
#define CP0_STATUS_CU1 (1 << 29) /* Bit 29: Controls access to coprocessor 1 */
|
||
#define CP0_STATUS_CU2 (1 << 30) /* Bit 30: Controls access to coprocessor 2 */
|
||
#define CP0_STATUS_CU3 (1 << 31) /* Bit 31: Controls access to coprocessor 3 */
|
||
|
||
/* Register Number: 13 Sel: 0 Name: Cause
|
||
* Function: Cause of last general exception
|
||
* Compliance Level: Required.
|
||
*/
|
||
|
||
#define CP0_CAUSE_EXCCODE_SHIFT (2) /* Bits 2-6: Exception code */
|
||
#define CP0_CAUSE_EXCCODE_MASK (31 << CP0_CAUSE_EXCCODE_SHIFT)
|
||
# define CP0_CAUSE_EXCCODE_INT (0 << CP0_CAUSE_EXCCODE_SHIFT) /* Interrupt */
|
||
# define CP0_CAUSE_EXCCODE_TLBL (2 << CP0_CAUSE_EXCCODE_SHIFT) /* TLB exception (load or instruction fetch) */
|
||
# define CP0_CAUSE_EXCCODE_TLBS (3 << CP0_CAUSE_EXCCODE_SHIFT) /* TLB exception (store) */
|
||
# define CP0_CAUSE_EXCCODE_ADEL (4 << CP0_CAUSE_EXCCODE_SHIFT) /* Address error exception (load or instruction fetch) */
|
||
# define CP0_CAUSE_EXCCODE_ADES (5 << CP0_CAUSE_EXCCODE_SHIFT) /* Address error exception (store) */
|
||
# define CP0_CAUSE_EXCCODE_IBE (6 << CP0_CAUSE_EXCCODE_SHIFT) /* Bus error exception (instruction fetch) */
|
||
# define CP0_CAUSE_EXCCODE_DBE (7 << CP0_CAUSE_EXCCODE_SHIFT) /* Bus error exception (data reference: load or store) */
|
||
# define CP0_CAUSE_EXCCODE_SYS (8 << CP0_CAUSE_EXCCODE_SHIFT) /* Syscall exception */
|
||
# define CP0_CAUSE_EXCCODE_BP (9 << CP0_CAUSE_EXCCODE_SHIFT) /* Breakpoint exception */
|
||
# define CP0_CAUSE_EXCCODE_RI (10 << CP0_CAUSE_EXCCODE_SHIFT) /* Reserved instruction exception */
|
||
# define CP0_CAUSE_EXCCODE_CPU (11 << CP0_CAUSE_EXCCODE_SHIFT) /* Coprocessor Unusable exception */
|
||
# define CP0_CAUSE_EXCCODE_OV (12 << CP0_CAUSE_EXCCODE_SHIFT) /* Arithmetic Overflow exception */
|
||
# define CP0_CAUSE_EXCCODE_TR (13 << CP0_CAUSE_EXCCODE_SHIFT) /* Trap exception */
|
||
# define CP0_CAUSE_EXCCODE_FPE (15 << CP0_CAUSE_EXCCODE_SHIFT) /* Floating point exception */
|
||
# define CP0_CAUSE_EXCCODE_C2E (18 << CP0_CAUSE_EXCCODE_SHIFT) /* Precise Coprocessor 2 exceptions */
|
||
# define CP0_CAUSE_EXCCODE_MDMX (22 << CP0_CAUSE_EXCCODE_SHIFT) /* MDMX Unusable (MIPS64) */
|
||
# define CP0_CAUSE_EXCCODE_WATCH (23 << CP0_CAUSE_EXCCODE_SHIFT) /* WatchHi/WatchLo address */
|
||
# define CP0_CAUSE_EXCCODE_MCHECK (24 << CP0_CAUSE_EXCCODE_SHIFT) /* Machine check */
|
||
# define CP0_CAUSE_EXCCODE_CACHEERR (30 << CP0_CAUSE_EXCCODE_SHIFT) /* Cache error */
|
||
#define CP0_CAUSE_IP0 (1 << 8) /* Bit 8: Controls request for software interrupt 0 */
|
||
#define CP0_CAUSE_IP1 (1 << 9) /* Bit 9: Controls request for software interrupt 1 */
|
||
#define CP0_CAUSE_IP_SHIFT (10) /* Bits 10-15: Pending external interrupts */
|
||
#define CP0_CAUSE_IP_MASK (0x3f << CP0_CAUSE_IP_SHIFT)
|
||
# define CP0_CAUSE_IP2 (0x10 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 0 */
|
||
# define CP0_CAUSE_IP3 (0x11 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 1 */
|
||
# define CP0_CAUSE_IP4 (0x12 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 2 */
|
||
# define CP0_CAUSE_IP5 (0x13 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 3 */
|
||
# define CP0_CAUSE_IP6 (0x14 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 4 */
|
||
# define CP0_CAUSE_IP7 (0x15 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 5, timer or performance counter interrupt */
|
||
#define CP0_CAUSE_WP (1 << 22) /* Watch exception was deferred */
|
||
#define CP0_CAUSE_IV (1 << 23) /* Bit 23: Interrupt exception uses special interrupt vector */
|
||
#define CP0_CAUSE_CE_SHIFT (28) /* Bits 28-29: Coprocessor unit number fo Coprocessor Unusable exception */
|
||
#define CP0_CAUSE_CE_MASK (3 << CP0_CAUSE_CE_SHIFT)
|
||
#define CP0_CAUSE_BD (1 << 31) /* Bit 31: Last exception occurred in a branch delay slot */
|
||
|
||
/* Register Number: 14 Sel: 0 Name: EPC
|
||
* Function: Program counter at last exception
|
||
* Compliance Level: Required.
|
||
*
|
||
* This register contains a 32-bit address value; No fields need be defined for this
|
||
* register.
|
||
*/
|
||
|
||
/* Register Number: 15 Sel: 0 Name: PRId
|
||
* Function: Processor identification and revision
|
||
* Compliance Level: Required.
|
||
*/
|
||
|
||
#define CP0_PRID_REV_SHIFT (0) /* Bits 0-7: Revision number of the processor */
|
||
#define CP0_PRID_REV_MASK (0xff << CP0_PRID_REV_SHIFT)
|
||
#define CP0_PRID_PROCID_SHIFT (8) /* Bits 8-15: Type of processor */
|
||
#define CP0_PRID_PROCID_MASK (0xff << CP0_PRID_PROCID_SHIFT)
|
||
#define CP0_PRID_COMPANY_SHIFT (16) /* Bits 16-23: Company ID */
|
||
#define CP0_PRID_COMPANY_MASK (0xff << CP0_PRID_COMPANY_SHIFT)
|
||
#define CP0_PRID_OPTIONS_SHIFT (24) /* Bits 24-31: Company-dependent options */
|
||
#define CP0_PRID_OPTIONS_MASK (0xff << CP0_PRID_OPTIONS_SHIFT)
|
||
|
||
/* Register Number: 16 Sel: 0 Name: Config
|
||
* Function: Configuration register
|
||
* Compliance Level: Required.
|
||
*/
|
||
|
||
#define CP0_CONFIG_K0_SHIFT (0) /* Bits 0-2: KSEG0 coherency algorithm */
|
||
#define CP0_CONFIG_K0_MASK (7 << CP0_CONFIG_K0_SHIFT)
|
||
# define CP0_CONFIG_K0_UNCACHED (2 << CP0_CONFIG_K0_SHIFT)
|
||
# define CP0_CONFIG_K0_CACHEABLE (3 << CP0_CONFIG_K0_SHIFT)
|
||
#define CP0_CONFIG_MT_SHIFT (7) /* Bits 7-9: MMU Type */
|
||
#define CP0_CONFIG_MT_MASK (7 << CP0_CONFIG_MT_SHIFT)
|
||
# define CP0_CONFIG_MT_NONE (0 << CP0_CONFIG_MT_SHIFT) /* None */
|
||
# define CP0_CONFIG_MT_TLB (1 << CP0_CONFIG_MT_SHIFT) /* Standard TLB */
|
||
# define CP0_CONFIG_MT_BAT (2 << CP0_CONFIG_MT_SHIFT) /* Standard BAT */
|
||
# define CP0_CONFIG_MT_FIXED (3 << CP0_CONFIG_MT_SHIFT) /* Standard fixed mapping */
|
||
#define CP0_CONFIG_AR_SHIFT (10) /* Bits 10-12: Architecture revision level */
|
||
#define CP0_CONFIG_AR_MASK (7 << CP0_CONFIG_AR_SHIFT)
|
||
# define CP0_CONFIG_AR_REV1 (0 << CP0_CONFIG_AR_SHIFT)
|
||
# define CP0_CONFIG_AR_REV2 (1 << CP0_CONFIG_AR_SHIFT)
|
||
#define CP0_CONFIG_AT_SHIFT (13) /* Bits 13-14: Architecture type implemented by the processor */
|
||
#define CP0_CONFIG_AT_MASK (3 << CP0_CONFIG_AT_SHIFT)
|
||
# define CP0_CONFIG_AT_MIPS32 (0 << CP0_CONFIG_AT_SHIFT) /* MIPS32 */
|
||
# define CP0_CONFIG_AT_MIPS64CMP (0 << CP0_CONFIG_AT_SHIFT) /* MIPS64 with 32-bit compatibility segments */
|
||
# define CP0_CONFIG_AT_MIPS64 (1 << CP0_CONFIG_AT_SHIFT) /* MIPS64 with access to all address segments */
|
||
#define CP0_CONFIG_BE (1 << 15) /* Bit 15: Processor is running in big-endian mode */
|
||
#define CP0_CONFIG_IMPL_SHIFT (16) /* Bits 16-30: Implementation dependent */
|
||
#define CP0_CONFIG_IMPL_MASK (0x7fff << CP0_CONFIG_IMPL_SHIFT)
|
||
#define CP0_CONFIG_M (1 << 31) /* Bit 31: Config1 register is implemented at select=1 */
|
||
|
||
/* Register Number: 16 Sel: 1 Name: Config1
|
||
* Function: Configuration register 1
|
||
* Compliance Level: Required.
|
||
*/
|
||
|
||
#define CP0_CONFIG1_FP (1 << 0 FPU implemented
|
||
#define CP0_CONFIG1_EP (1 << 1 EJTAG implemented
|
||
#define CP0_CONFIG1_CA (1 << 2 Code compression (MIPS16) implemented
|
||
#define CP0_CONFIG1_WR (1 << 3 Watch registers implemented
|
||
#define CP0_CONFIG1_PC (1 << 4 Performance Counter registers implemented
|
||
#define CP0_CONFIG1_MD (1 << 5 MDMX ASE implemented (MIPS64)
|
||
#define CP0_CONFIG1_C2 (1 << 6 Coprocessor 2 implemented
|
||
#define CP0_CONFIG1_DA_SHIFT (7) /* Bits 7-9: Dcache associativity */
|
||
#define CP0_CONFIG1_DA_MASK (7 << CP0_CONFIG1_DA_SHIFT)
|
||
# define CP0_CONFIG1_DA_DIRECT (0 << CP0_CONFIG1_DA_SHIFT) /* Direct mapped */
|
||
# define CP0_CONFIG1_DA_2WAY (1 << CP0_CONFIG1_DA_SHIFT) /* 2-way */
|
||
# define CP0_CONFIG1_DA_3WAY (2 << CP0_CONFIG1_DA_SHIFT) /* 3-way */
|
||
# define CP0_CONFIG1_DA_4WAY (3 << CP0_CONFIG1_DA_SHIFT) /* 4-way */
|
||
# define CP0_CONFIG1_DA_5WAY (4 << CP0_CONFIG1_DA_SHIFT) /* 5-way */
|
||
# define CP0_CONFIG1_DA_6WAY (5 << CP0_CONFIG1_DA_SHIFT) /* 6-way */
|
||
# define CP0_CONFIG1_DA_7WAY (6 << CP0_CONFIG1_DA_SHIFT) /* 7-way */
|
||
# define CP0_CONFIG1_DA_8WAY (7 << CP0_CONFIG1_DA_SHIFT) /* 8-way */
|
||
#define CP0_CONFIG1_DL_SHIFT (10) /* Bits 10-12: Dcache line size */
|
||
#define CP0_CONFIG1_DL_MASK (7 << CP0_CONFIG1_DL_SHIFT)
|
||
# define CP0_CONFIG1_DL_NONE (0 << CP0_CONFIG1_DL_SHIFT) /* No Dcache present */
|
||
# define CP0_CONFIG1_DL_4BYTES (1 << CP0_CONFIG1_DL_SHIFT) /* 4 bytes */
|
||
# define CP0_CONFIG1_DL_8BYTES (2 << CP0_CONFIG1_DL_SHIFT) /* 8 bytes */
|
||
# define CP0_CONFIG1_DL_16BYTES (3 << CP0_CONFIG1_DL_SHIFT) /* 16 bytes */
|
||
# define CP0_CONFIG1_DL_32BYTES (4 << CP0_CONFIG1_DL_SHIFT) /* 32 bytes */
|
||
# define CP0_CONFIG1_DL_64BYTES (5 << CP0_CONFIG1_DL_SHIFT) /* 64 bytes */
|
||
# define CP0_CONFIG1_DL_128BYTES (6 << CP0_CONFIG1_DL_SHIFT) /* 128 bytes */
|
||
#define CP0_CONFIG1_DS_SHIFT (13) /* Bits 13-15: Dcache sets per way */
|
||
#define CP0_CONFIG1_DS_MASK (7 << CP0_CONFIG1_DS_SHIFT)
|
||
# define CP0_CONFIG1_DS_64SETS (0 << CP0_CONFIG1_DS_SHIFT)
|
||
# define CP0_CONFIG1_DS_128SETS (1 << CP0_CONFIG1_DS_SHIFT)
|
||
# define CP0_CONFIG1_DS_256SETS (2 << CP0_CONFIG1_DS_SHIFT)
|
||
# define CP0_CONFIG1_DS_512SETS (3 << CP0_CONFIG1_DS_SHIFT)
|
||
# define CP0_CONFIG1_DS_1024SETS (4 << CP0_CONFIG1_DS_SHIFT)
|
||
# define CP0_CONFIG1_DS_2048SETS (5 << CP0_CONFIG1_DS_SHIFT)
|
||
# define CP0_CONFIG1_DS_4096SETS (6 << CP0_CONFIG1_DS_SHIFT)
|
||
#define CP0_CONFIG1_IA_SHIFT (16) /* Bits 16-18: Icache associativity */
|
||
#define CP0_CONFIG1_IA_MASK (7 << CP0_CONFIG1_IA_SHIFT)
|
||
# define CP0_CONFIG1_IA_DIRECT (0 << CP0_CONFIG1_IA_SHIFT) /* Direct mapped */
|
||
# define CP0_CONFIG1_IA_2WAY (1 << CP0_CONFIG1_IA_SHIFT) /* 2-way */
|
||
# define CP0_CONFIG1_IA_3WAY (2 << CP0_CONFIG1_IA_SHIFT) /* 3-way */
|
||
# define CP0_CONFIG1_IA_4WAY (3 << CP0_CONFIG1_IA_SHIFT) /* 4-way */
|
||
# define CP0_CONFIG1_IA_5WAY (4 << CP0_CONFIG1_IA_SHIFT) /* 5-way */
|
||
# define CP0_CONFIG1_IA_6WAY (5 << CP0_CONFIG1_IA_SHIFT) /* 6-way */
|
||
# define CP0_CONFIG1_IA_7WAY (6 << CP0_CONFIG1_IA_SHIFT) /* 7-way */
|
||
# define CP0_CONFIG1_IA_8WAY (7 << CP0_CONFIG1_IA_SHIFT) /* 8-way */
|
||
#define CP0_CONFIG1_IL_SHIFT (19) /* Bits 19-21: Icache line size */
|
||
#define CP0_CONFIG1_IL_MASK (7 << CP0_CONFIG1_IL_SHIFT)
|
||
# define CP0_CONFIG1_IL_NONE (0 << CP0_CONFIG1_IL_SHIFT) /* No Dcache present */
|
||
# define CP0_CONFIG1_IL_4BYTES (1 << CP0_CONFIG1_IL_SHIFT) /* 4 bytes */
|
||
# define CP0_CONFIG1_IL_8BYTES (2 << CP0_CONFIG1_IL_SHIFT) /* 8 bytes */
|
||
# define CP0_CONFIG1_IL_16BYTES (3 << CP0_CONFIG1_IL_SHIFT) /* 16 bytes */
|
||
# define CP0_CONFIG1_IL_32BYTES (4 << CP0_CONFIG1_IL_SHIFT) /* 32 bytes */
|
||
# define CP0_CONFIG1_IL_64BYTES (5 << CP0_CONFIG1_IL_SHIFT) /* 64 bytes */
|
||
# define CP0_CONFIG1_IL_128BYTES (6 << CP0_CONFIG1_IL_SHIFT) /* 128 bytes */
|
||
#define CP0_CONFIG1_IS_SHIFT (22) /* Bits 22-24: Icache sets per way */
|
||
#define CP0_CONFIG1_IS_MASK (7 << CP0_CONFIG1_IS_SHIFT)
|
||
# define CP0_CONFIG1_IS_64SETS (0 << CP0_CONFIG1_IS_SHIFT)
|
||
# define CP0_CONFIG1_IS_128SETS (1 << CP0_CONFIG1_IS_SHIFT)
|
||
# define CP0_CONFIG1_IS_256SETS (2 << CP0_CONFIG1_IS_SHIFT)
|
||
# define CP0_CONFIG1_IS_512SETS (3 << CP0_CONFIG1_IS_SHIFT)
|
||
# define CP0_CONFIG1_IS_1024SETS (4 << CP0_CONFIG1_IS_SHIFT)
|
||
# define CP0_CONFIG1_IS_2048SETS (5 << CP0_CONFIG1_IS_SHIFT)
|
||
# define CP0_CONFIG1_IS_4096SETS (6 << CP0_CONFIG1_IS_SHIFT)
|
||
#define CP0_CONFIG1_MMUSIZE_SHIFT (25) /* Bits 25-30: Number of entries in the TLB minus one */
|
||
#define CP0_CONFIG1_MMUSIZE_MASK (0x3f << CP0_CONFIG1_MMUSIZE_SHIFT)
|
||
#define CP0_CONFIG1_M (1 << 31) /* Bit 31: Config2 register is present */
|
||
|
||
/* Register Number: 16 Sel: 2 Name: Config2
|
||
* Function: Configuration register 2
|
||
* Compliance Level: Optional.
|
||
*/
|
||
|
||
#define CP0_CONFIG2_TBS_SHIFT (0) /* Bits 0-30: Configuration of the level 2 and level 3 caches */
|
||
#define CP0_CONFIG2_TBS_MASK (0x7fffffff << CP0_CONFIG2_TBS_SHIFT)
|
||
#define CP0_CONFIG2_M (1 << 31) /* Bit 31: Config3 register is present */
|
||
|
||
/* Register Number: 16 Sel: 3 Name: Config3
|
||
* Function: Configuration register 3
|
||
* Compliance Level: Optional.
|
||
*/
|
||
#define CP0_CONFIG3_TL (1 << 0) /* Bit 0: Trace Logic implemented */
|
||
#define CP0_CONFIG3_SM (1 << 1) /* Bit 1: SmartMIPS<50> ASE implemented */
|
||
#define CP0_CONFIG3_M (1 << 31) /* Bit 31: Config4 register is present */
|
||
|
||
/* Register Number: 16 Sel: 6-7 (Available for implementation dependent use) */
|
||
|
||
/* Register Number: 17 Sel: 0 Name: LLAddr
|
||
* Function: Load linked address
|
||
* Compliance Level: Optional.
|
||
*
|
||
* This register contains a 32-bit address value; No fields need be defined for this
|
||
* register.
|
||
*/
|
||
|
||
/* Register Number: 18 Sel: 0-n Name: WatchLo
|
||
* Function: Watchpoint address
|
||
* Compliance Level: Optional.
|
||
*/
|
||
|
||
#define CP0_WATCHLO_W (1 << 0) /* Bit 0: Exceptions are enabled for stores */
|
||
#define CP0_WATCHLO_R (1 << 1) /* Bit 0: Exceptions are enabled for loads */
|
||
#define CP0_WATCHLO_I (1 << 2) /* Bit 0: Exceptions are enabled for instructions */
|
||
#define CP0_WATCHLO_VADDR_SHIFT (3) /* Bits 3-31: Virtual address to match */
|
||
#define CP0_WATCHLO_VADDR_MASK (0x1fffffff << CP0_WATCHLO_VADDR_SHIFT)
|
||
|
||
/* Register Number: 19 Sel: 0-n Name: WatchHi
|
||
* Function: Watchpoint control
|
||
* Compliance Level: Optional.
|
||
*/
|
||
|
||
#define CP0_WATCHHI_MASK_SHIFT (3) /* Bits 3-11: Mask that qualifies the WatchLo address */
|
||
#define CP0_WATCHHI_MASK_MASK (0x1ff << CP0_WATCHHI_MASK_SHIFT)
|
||
#define CP0_WATCHHI_ASID_SHIFT (16) /* Bits 16-23: ASID value which to match that in the EntryHi register */
|
||
#define CP0_WATCHHI_ASID_MASK (0xff << CP0_WATCHHI_ASID_SHIFT)
|
||
#define CP0_WATCHHI_G (1 << 30) /* Bit 30: Any address matcing the WatchLo addr will cause an exception */
|
||
#define CP0_WATCHHI_M (1 << 31) /* Bit 30: Another pair of WatchHi/WatchLo registers at select n+1 */
|
||
|
||
/* Register Number: 20 Sel: 0 Name: XContext
|
||
* Function: in 64-bit implementations
|
||
*
|
||
* Register Number: 21 Sel: all (Reserved for future extensions)
|
||
*
|
||
* Register Number: 22 Sel: all Available for implementation dependent use)
|
||
*
|
||
* Register Number: 23 Sel: 0 Name: Debug
|
||
* Function: EJTAG Debug register
|
||
* Compliance Level: Optional, part of the EJTAG specification.
|
||
*
|
||
* Register Number: 24 Sel: 0 Name: DEPC
|
||
* Function: Program counter at last EJTAG debug exception
|
||
* Compliance Level: Optional, part of the EJTAG specification.
|
||
*
|
||
* This register contains a 32-bit address value; No fields need be defined for this
|
||
* register.
|
||
*/
|
||
|
||
/* Register Number: 25 Sel: 0-n Name: PerfCnt
|
||
* Function: Performance counter interface
|
||
* Compliance Level: Recommended.
|
||
*/
|
||
|
||
#define CP0_PERFCNT_EXL (1 << 0) /* Bit 0: Enables event counting when STATUS EXL=1 ERL=0 */
|
||
#define CP0_PERFCNT_K (1 << 1) /* Bit 1: Enables event counting in Kernel Mode (EXL=0 ERL=0) */
|
||
#define CP0_PERFCNT_S (1 << 2) /* Bit 2: Enables event counting in Supervisor Mode */
|
||
#define CP0_PERFCNT_U (1 << 3) /* Bit 3: Enables event counting in User Mode */
|
||
#define CP0_PERFCNT_IE (1 << 4) /* Bit 4: Interrupt Enable */
|
||
#define CP0_PERFCNT_EVENT_SHIFT (5) /* Bits 5-10: Event to be counted */
|
||
#define CP0_PERFCNT_EVENT_MASK (0xffff << CP0_PERFCNT_EVENT_SHIFT)
|
||
#define CP0_PERFCNT_M (1 << 31) /* Bit 31: Another pair of performance registers at n+2 and n+3 */
|
||
|
||
/* Register Number: 26 Sel: 0 Name: ErrCtl
|
||
* Function: Parity/ECC error control and status
|
||
* Compliance Level: Optional.
|
||
*
|
||
* The bit definitions within the ErrCtl register are implementation dependent.
|
||
*
|
||
* Register Number: 27 Sel: 0-3 Name: CacheErr
|
||
* Function: Cache parity error control and status
|
||
* Compliance Level: Optional.
|
||
*
|
||
* The bit definitions within the CacheErr register are implementation dependent.
|
||
*
|
||
* Register Number: 28 Sel: 0 Name: TagLo
|
||
* Function: Low-order portion of cache tag interface
|
||
* Compliance Level: Required if a cache is implemented; Optional otherwise.
|
||
*
|
||
* The bit definitions within the TagLo register are implementation dependent.
|
||
*
|
||
* Register Number: 28 Sel: 1, 3 Name: DataLo
|
||
* Function: The DataLo and DataHi registers are read-only registers that
|
||
* act as the interface to the cache data array and are intended for
|
||
* diagnostic operation only.
|
||
* Compliance Level: Optional.
|
||
*
|
||
* The bit definitions within the DataLo register are implementation dependent.
|
||
*
|
||
* Register Number: 29 Sel: 0 Name: TagHi
|
||
* Function: High-order portion of cache tag interface
|
||
* Compliance Level: Required if a cache is implemented; Optional otherwise.
|
||
*
|
||
* The bit definitions within the TagHi register are implementation dependent.
|
||
*
|
||
* Register Number: 29 Sel: 1, 3 Name: DataHi
|
||
* Function: The DataLo and DataHi registers are read-only registers that
|
||
* act as the interface to the cache data array and are intended for
|
||
* diagnostic operation only.
|
||
* Compliance Level: Optional.
|
||
*
|
||
* The bit definitions within the DataHi register are implementation dependent.
|
||
*
|
||
* Register Number: 30 Sel: 0 Name: ErrorEPC
|
||
* Function: Program counter at last error
|
||
* Compliance Level: Required.
|
||
*
|
||
* This register contains a 32-bit address value; No fields need be defined for this
|
||
* register.
|
||
*
|
||
* Register Number: 31 Sel: 0 Name: DESAVE
|
||
* Function: EJTAG debug exception save register
|
||
* Compliance Level: Optional, part of the EJTAG specification.
|
||
*
|
||
* This register contains a 32-bit address value; No fields need be defined for this
|
||
* register.
|
||
*/
|
||
|
||
/********************************************************************************************
|
||
* Public Types
|
||
********************************************************************************************/
|
||
|
||
#ifndef __ASSEMBLY__
|
||
|
||
/********************************************************************************************
|
||
* Inline Functions
|
||
********************************************************************************************/
|
||
|
||
/********************************************************************************************
|
||
* Public Function Prototypes
|
||
********************************************************************************************/
|
||
|
||
#ifdef __cplusplus
|
||
#define EXTERN extern "C"
|
||
extern "C" {
|
||
#else
|
||
#define EXTERN extern
|
||
#endif
|
||
|
||
#undef EXTERN
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|
||
|
||
#endif /* __ASSEMBLY__ */
|
||
#endif /* __ARCH_MIPS_INCLUDE_MIPS32_CP0_H */
|