Junmin Kim e06329f5e7 fs/vfs/fs_open.c: Fix description of nx_open and nx_vopen comments indicate that they return zero on success when, in fact, they return the new file descriptor.		2019-12-12 08:24:14 -06:00
..
1wire	…
analog	drivers/analog: Run all wireless drivers through tools/nxstyle, correcting as many complaints as possible.	2019-12-05 15:13:55 -06:00
audio	include/nuttx/audio/audio.h: Fix some typos that I introduced with my review of a recent patch.	2019-11-04 10:45:13 -06:00
binfmt	Remove all support for the ancient Pascal compiler and pcode interpreter.	2019-11-21 06:58:38 -06:00
can	All function pointer types should be prefaced by the qualifier CODE (unless the callable function is known to reside in RAM, then it should be FAR).	2019-08-26 17:31:29 -06:00
contactless	…
crypto	…
drivers	drivers/addrenv.c: Move up_addrenv_ implemenation to common folder.	2019-11-03 19:45:05 -06:00
eeprom	…
fs	fs/vfs/fs_open.c: Fix description of nx_open and nx_vopen comments indicate that they return zero on success when, in fact, they return the new file descriptor.	2019-12-12 08:24:14 -06:00
i2c	…
input	Various cosmetic changes.	2019-09-09 14:47:47 -06:00
ioexpander	include/nuttx/ioexpander/gpio.h: Add guards so that file content will not compile unless CONFIG_DEV_GPIO is selected.	2019-11-03 19:46:56 -06:00
lcd	Squashed commit of the following:	2019-07-10 09:00:17 -06:00
leds	drivers/timers/pwm.c: Move the pwm/pwm.c driver to timers/pwm.c, The drivers/pwm contained only one .c file (pwm.c), so to avoid the proliferation of sub-directories inside drivers/ is better to move the pwm.c driver to drivers/timers. The pwm.h header was moved to include/nuttx/timers to keep consistency, so all files referencing it need to be updated.	2019-09-02 07:57:10 -06:00
lib	libs/libc/builtin/: builtint_isavail() should not set the errno variable because this functions may be used by internal OS logic for which setting the rrno variable would be inappropriate.	2019-09-11 12:37:29 -06:00
mbox	This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied.	2019-11-02 11:30:33 -06:00
mm	include/nuttx/mm/mm.h: Remove the assumption that one character equals eight bits.	2019-11-03 19:54:23 -06:00
modem	Merged in alinjerpelea/nuttx (pull request #1056)	2019-10-21 14:14:33 +00:00
mtd	Author: Gregory Nutt <gnutt@nuttx.org>	2019-11-20 17:25:40 -06:00
net	include/nuttx/net/w5500.h: Finishes off register bitfield definitions. Driver will follow.	2019-12-08 10:53:52 -06:00
nx	Fix use of undefined pp-token #errror, other typos.	2019-09-19 18:19:18 -06:00
power	drivers/power/pm: Historically, the NuttX PM subsystem has consisted of two functional components: (1) an "Upper" part that detects state changes based on a random walk driven by activity levels, and (2) and "lower" part that implementst the state changes.	2019-11-09 09:09:33 -06:00
rf	drivers/rf/dat-31r5-sp.c: dd support to the DAT-31R5-SP+ digital attenuator. Creates a the new device driver directory drivers/rf/ to support drivers related to RF peripherals. It also adds support for the DAT-31R5-SP+ digital attenuator.	2019-09-05 13:28:28 -06:00
rptun	include/nuttx/rptun/rptun.h: openamp/open_amp.h must not be included unless CONFIG_RPTUN (and heance CONFIG_OPENAMP) are selected.	2019-11-04 07:15:06 -06:00
sensors	Merged in kyChuGit/nuttx/aht10_sensor (pull request #1084)	2019-12-02 14:36:09 +00:00
serial	Merged in david_s5/nuttx/px4_firmware_nuttx-8.1+_siglewire (pull request #1070)	2019-11-10 12:27:47 +00:00
spi	include/nuttx/net/w5500.h: Header file for the WIZnet S5500 Ethernet chip. Still missing register bit definitions. Driver will follow.	2019-12-08 09:57:42 -06:00
syslog	drivers/syslog/ramlog.c: Fix ramlog readers never woken up when using ramlog as syslog or console.	2019-11-14 07:40:35 -06:00
timers	This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied.	2019-11-02 11:30:33 -06:00
usb	include/nuttx/usb/usbdev.h: Fix a typo introduced with commit 67b4f9d0e1.	2019-11-03 13:16:30 -06:00
video	Merged in alinjerpelea/nuttx (pull request #1033)	2019-09-18 11:42:35 +00:00
wireless	Merged in masayuki2009/nuttx.nuttx/gs2200m_with_reset (pull request #1050)	2019-10-15 21:03:33 +00:00
.gitignore	…
addrenv.h	All function pointer types should be prefaced by the qualifier CODE (unless the callable function is known to reside in RAM, then it should be FAR).	2019-08-26 17:31:29 -06:00
arch.h	Fix minor typos in docs and comments.	2019-09-29 12:52:20 -06:00
ascii.h	…
b2c.h	This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied.	2019-11-02 11:30:33 -06:00
board.h	Fix typos in comments.	2019-08-21 09:32:59 -06:00
cache.h	…
cancelpt.h	…
clock.h	sched/pthread, Documentation: fix pthread_key_delete, pthread_self and pthread_yield documentation and some comments.	2019-10-17 11:04:17 -06:00
compiler.h	include/nuttx/compiler.h: Changes that go along with commit 0002258f17	2019-10-31 18:11:28 -06:00
elf.h	…
environ.h	All function pointer types should be prefaced by the qualifier CODE (unless the callable function is known to reside in RAM, then it should be FAR).	2019-08-26 17:31:29 -06:00
envpath.h	…
init.h	libs/libc/unistd/lib_getcwd.c: remove stray sched_unlock(). Also fixes several typos.	2019-09-20 06:23:48 -06:00
irq.h	…
kmalloc.h	…
kthread.h	…
list.h	…
mmcsd.h	…
module.h	…
mqueue.h	Fix some typos. Mostly inital->initial.	2019-09-27 06:32:32 -06:00
mutex.h	Fix a few minor typos	2019-09-08 15:59:14 -06:00
nuttx.h	…
page.h	All function pointer types should be prefaced by the qualifier CODE (unless the callable function is known to reside in RAM, then it should be FAR).	2019-08-26 17:31:29 -06:00
pgalloc.h	…
progmem.h	…
pthread.h	…
random.h	…
sched.h	Re-implements reverted commit 344f7bc9f6 in a way that should not have the undesired side-effect. include/nuttx/sched.h: Add a bit to the TCB flags to indicat the thread is a user thread in a syscall. sched/nuttx/nxsig_dispatch.c: Delay dispatching to signal handlers if within a system call. In all syscall implementations: Process delayed signal handling when exiting system call.	2019-11-28 12:47:36 -06:00
sched_note.h	Fix various typos and spelling errors.	2019-12-12 07:41:51 -06:00
scsi.h	Fix use of undefined pp-token #errror, other typos.	2019-09-19 18:19:18 -06:00
sdio.h	drivers/mmcsd: Added support for MMC(eMMC) bigger than 2 GB (Tested with IMXRT1050EVKB and samsung eMMC 16GB). arch/arm/src/imxrt: IMXRT uSDHC driver cmd line reset logic modified.	2019-08-21 09:23:29 -06:00
semaphore.h	Fix a few minor typos	2019-09-08 15:59:14 -06:00
signal.h	Fix minor typo / copy-paste. 'cancellaction point'->'cancellation point'	2019-08-23 11:57:35 -06:00
spawn.h	syscall/ and related: Fix an error found in build testing. Inconsistent conditional compilation led to link errors in certain configurations.	2019-08-27 16:41:07 -06:00
spinlock.h	sched/semaphore/spinlock.c: spin_trylock handle memory barrier and instrumentation correctly.	2019-11-03 19:40:58 -06:00
streams.h	drivers/syslog: syslog_force does not set errno so do not test against it. Some changes to comments.	2019-09-16 07:48:48 -06:00
symtab.h	Fix a typo in include/nuttx/symtab.h	2019-09-28 10:57:54 -06:00
time.h	…
tls.h	…
tree.h	…
userspace.h	…
vt100.h	…
wdog.h	Cosmetic updates.	2019-08-28 15:14:27 -06:00
wqueue.h	net/netlink: Redesign the logic that handles notifications of when response data is available. Signal handlers are sub-optimal inside the OS (especially after the preceding change which forces the hand). Instead, use the work queue notifiers as is done with all other network notifiers.	2019-11-28 14:20:40 -06:00
zoneinfo.h	…