OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/syscall/syscall_lookup.h

292 lines
13 KiB
C
Raw Blame History

/****************************************************************************
* syscall/syscall_lookup.h
*
* Copyright (C) 2011, 2013-2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* SYSCALL_LOOKUP must be defined before including this file.
*
* These first system calls are supported regardless of the NuttX
* configuration
*/
SYSCALL_LOOKUP1(_exit, 1, STUB__exit)
SYSCALL_LOOKUP(exit, 1, STUB_exit)
SYSCALL_LOOKUP(get_errno, 0, STUB_get_errno)
SYSCALL_LOOKUP(getpid, 0, STUB_getpid)
SYSCALL_LOOKUP(sched_getparam, 2, STUB_sched_getparam)
SYSCALL_LOOKUP(sched_getscheduler, 1, STUB_sched_getscheduler)
SYSCALL_LOOKUP(sched_lock, 0, STUB_sched_lock)
SYSCALL_LOOKUP(sched_lockcount, 0, STUB_sched_lockcount)
SYSCALL_LOOKUP(sched_rr_get_interval, 2, STUB_sched_rr_get_interval)
SYSCALL_LOOKUP(sched_setparam, 2, STUB_sched_setparam)
SYSCALL_LOOKUP(sched_setscheduler, 3, STUB_sched_setscheduler)
SYSCALL_LOOKUP(sched_unlock, 0, STUB_sched_unlock)
SYSCALL_LOOKUP(sched_yield, 0, STUB_sched_yield)
SYSCALL_LOOKUP(sem_close, 1, STUB_sem_close)
SYSCALL_LOOKUP(sem_destroy, 2, STUB_sem_destroy)
SYSCALL_LOOKUP(sem_open, 6, STUB_sem_open)
SYSCALL_LOOKUP(sem_post, 1, STUB_sem_post)
SYSCALL_LOOKUP(sem_timedwait, 2, STUB_sem_timedwait)
SYSCALL_LOOKUP(sem_trywait, 1, STUB_sem_trywait)
SYSCALL_LOOKUP(sem_unlink, 1, STUB_sem_unlink)
SYSCALL_LOOKUP(sem_wait, 1, STUB_sem_wait)
SYSCALL_LOOKUP(set_errno, 1, STUB_set_errno)
SYSCALL_LOOKUP(task_create, 5, STUB_task_create)
SYSCALL_LOOKUP(task_delete, 1, STUB_task_delete)
SYSCALL_LOOKUP(task_restart, 1, STUB_task_restart)
SYSCALL_LOOKUP(up_assert, 2, STUB_up_assert)
/* The following can be individually enabled */
#ifdef CONFIG_ARCH_HAVE_VFORK
SYSCALL_LOOKUP(vfork, 0, SYS_vfork)
#endif
#ifdef CONFIG_SCHED_ATEXIT
SYSCALL_LOOKUP(atexit, 1, STUB_atexit)
#endif
#ifdef CONFIG_SCHED_ONEXIT
SYSCALL_LOOKUP(on_exit, 2, STUB_on_exit)
#endif
#ifdef CONFIG_SCHED_WAITPID
SYSCALL_LOOKUP(waitpid, 3, STUB_waitpid)
# ifdef CONFIG_SCHED_HAVE_PARENT
SYSCALL_LOOKUP(wait, 1, STUB_wait)
SYSCALL_LOOKUP(waitid, 4, STUB_waitid)
# endif
#endif
/* The following can only be defined if we are configured to execute
* programs from a file system.
*/
#if defined(CONFIG_BINFMT_DISABLE) && defined(CONFIG_LIBC_EXECFUNCS)
# ifdef CONFIG_BINFMT_EXEPATH
SYSCALL_LOOKUP(posix_spawnp, 6, SYS_posixspawnp)
# else
SYSCALL_LOOKUP(posix_spawn, 6, SYS_posixspawn)
# endif
SYSCALL_LOOKUP(execv, 2, SYS_execv)
SYSCALL_LOOKUP(execl, 6, SYS_execl)
#endif
/* The following are only defined is signals are supported in the NuttX
* configuration.
*/
#ifndef CONFIG_DISABLE_SIGNALS
SYSCALL_LOOKUP(kill, 2, STUB_kill)
SYSCALL_LOOKUP(sigaction, 3, STUB_sigaction)
SYSCALL_LOOKUP(sigpending, 1, STUB_sigpending)
SYSCALL_LOOKUP(sigprocmask, 3, STUB_sigprocmask)
SYSCALL_LOOKUP(sigqueue, 3, STUB_sigqueue)
SYSCALL_LOOKUP(sigsuspend, 1, STUB_sigsuspend)
SYSCALL_LOOKUP(sigtimedwait, 3, STUB_sigtimedwait)
SYSCALL_LOOKUP(sigwaitinfo, 2, STUB_sigwaitinfo)
SYSCALL_LOOKUP(nanosleep, 2, STUB_nanosleep)
#endif
/* The following are only defined if the system clock is enabled in the
* NuttX configuration.
*/
SYSCALL_LOOKUP(syscall_clock_systimer, 0, STUB_clock_systimer)
SYSCALL_LOOKUP(clock_getres, 2, STUB_clock_getres)
SYSCALL_LOOKUP(clock_gettime, 2, STUB_clock_gettime)
SYSCALL_LOOKUP(clock_settime, 2, STUB_clock_settime)
SYSCALL_LOOKUP(gettimeofday, 2, STUB_gettimeofday)
/* The following are defined only if POSIX timers are supported */
#ifndef CONFIG_DISABLE_POSIX_TIMERS
SYSCALL_LOOKUP(timer_create, 3, STUB_timer_create)
SYSCALL_LOOKUP(timer_delete, 1, STUB_timer_delete)
SYSCALL_LOOKUP(timer_getoverrun, 1, STUB_timer_getoverrun)
SYSCALL_LOOKUP(timer_gettime, 2, STUB_timer_gettime)
SYSCALL_LOOKUP(timer_settime, 4, STUB_timer_settime)
#endif
/* The following are defined if either file or socket descriptor are
* enabled.
*/
#if CONFIG_NFILE_DESCRIPTORS > 0 || CONFIG_NSOCKET_DESCRIPTORS > 0
SYSCALL_LOOKUP(close, 1, STUB_close)
SYSCALL_LOOKUP(ioctl, 3, STUB_ioctl)
SYSCALL_LOOKUP(read, 3, STUB_read)
SYSCALL_LOOKUP(write, 3, STUB_write)
# ifndef CONFIG_DISABLE_POLL
SYSCALL_LOOKUP(poll, 3, STUB_poll)
SYSCALL_LOOKUP(select, 5, STUB_select)
# endif
#endif
/* The following are defined if file descriptors are enabled */
#if CONFIG_NFILE_DESCRIPTORS > 0
SYSCALL_LOOKUP(closedir, 1, STUB_closedir)
SYSCALL_LOOKUP(dup, 1, STUB_dup)
SYSCALL_LOOKUP(dup2, 2, STUB_dup2)
SYSCALL_LOOKUP(fcntl, 6, STUB_fcntl)
SYSCALL_LOOKUP(lseek, 3, STUB_lseek)
SYSCALL_LOOKUP(mkfifo, 2, STUB_mkfifo)
SYSCALL_LOOKUP(mmap, 6, STUB_mmap)
SYSCALL_LOOKUP(open, 6, STUB_open)
SYSCALL_LOOKUP(opendir, 1, STUB_opendir)
SYSCALL_LOOKUP(pipe, 1, STUB_pipe)
SYSCALL_LOOKUP(readdir, 1, STUB_readdir)
SYSCALL_LOOKUP(rewinddir, 1, STUB_rewinddir)
SYSCALL_LOOKUP(seekdir, 2, STUB_seekdir)
SYSCALL_LOOKUP(stat, 2, STUB_stat)
SYSCALL_LOOKUP(statfs, 2, STUB_statfs)
SYSCALL_LOOKUP(telldir, 1, STUB_telldir)
# if CONFIG_NFILE_STREAMS > 0
SYSCALL_LOOKUP(fdopen, 3, STUB_fs_fdopen)
SYSCALL_LOOKUP(sched_getstreams, 0, STUB_sched_getstreams)
# endif
# if defined(CONFIG_NET_SENDFILE)
SYSCALL_LOOKUP(sendfile, 4, STUB_fs_sendifile)
# endif
# if !defined(CONFIG_DISABLE_MOUNTPOINT)
SYSCALL_LOOKUP(fsync, 1, STUB_fsync)
SYSCALL_LOOKUP(mkdir, 2, STUB_mkdir)
SYSCALL_LOOKUP(mount, 5, STUB_mount)
SYSCALL_LOOKUP(rename, 2, STUB_rename)
SYSCALL_LOOKUP(rmdir, 1, STUB_rmdir)
SYSCALL_LOOKUP(umount, 1, STUB_umount)
SYSCALL_LOOKUP(unlink, 1, STUB_unlink)
# endif
#endif
/* The following are defined if pthreads are enabled */
#ifndef CONFIG_DISABLE_PTHREAD
SYSCALL_LOOKUP(pthread_barrier_destroy, 1, STUB_pthread_barrier_destroy)
SYSCALL_LOOKUP(pthread_barrier_init, 3, STUB_pthread_barrier_init)
SYSCALL_LOOKUP(pthread_barrier_wait, 1, STUB_pthread_barrier_wait)
SYSCALL_LOOKUP(pthread_cancel, 1, STUB_pthread_cancel)
SYSCALL_LOOKUP(pthread_cond_broadcast, 1, STUB_pthread_cond_broadcast)
SYSCALL_LOOKUP(pthread_cond_destroy, 1, STUB_pthread_cond_destroy)
SYSCALL_LOOKUP(pthread_cond_init, 2, STUB_pthread_cond_init)
SYSCALL_LOOKUP(pthread_cond_signal, 1, STUB_pthread_cond_signal)
SYSCALL_LOOKUP(pthread_cond_wait, 2, STUB_pthread_cond_wait)
SYSCALL_LOOKUP(pthread_create, 4, STUB_pthread_create)
SYSCALL_LOOKUP(pthread_detach, 1, STUB_pthread_detach)
SYSCALL_LOOKUP(pthread_exit, 1, STUB_pthread_exit)
SYSCALL_LOOKUP(pthread_getschedparam, 3, STUB_pthread_getschedparam)
SYSCALL_LOOKUP(pthread_getspecific, 1, STUB_pthread_getspecific)
SYSCALL_LOOKUP(pthread_join, 2, STUB_pthread_join)
SYSCALL_LOOKUP(pthread_key_create, 2, STUB_pthread_key_create)
SYSCALL_LOOKUP(pthread_key_delete, 1, STUB_pthread_key_delete)
SYSCALL_LOOKUP(pthread_mutex_destroy, 1, STUB_pthread_mutex_destroy)
SYSCALL_LOOKUP(pthread_mutex_init, 2, STUB_pthread_mutex_init)
SYSCALL_LOOKUP(pthread_mutex_lock, 1, STUB_pthread_mutex_lock)
SYSCALL_LOOKUP(pthread_mutex_trylock, 1, STUB_pthread_mutex_trylock)
SYSCALL_LOOKUP(pthread_mutex_unlock, 1, STUB_pthread_mutex_unlock)
SYSCALL_LOOKUP(pthread_once, 2, STUB_pthread_once)
SYSCALL_LOOKUP(pthread_setcancelstate, 2, STUB_pthread_setcancelstate)
SYSCALL_LOOKUP(pthread_setschedparam, 3, STUB_pthread_setschedparam)
SYSCALL_LOOKUP(pthread_setschedprio, 2, STUB_pthread_setschedprio)
SYSCALL_LOOKUP(pthread_setspecific, 2, STUB_pthread_setspecific)
SYSCALL_LOOKUP(pthread_yield, 0, STUB_pthread_yield)
# ifndef CONFIG_DISABLE_SIGNAL
SYSCALL_LOOKUP(pthread_cond_timedwait, 3, STUB_pthread_cond_timedwait)
SYSCALL_LOOKUP(pthread_kill, 2, STUB_pthread_kill)
SYSCALL_LOOKUP(pthread_sigmask, 3, STUB_pthread_sigmask)
# endif
#endif
/* The following are defined only if message queues are enabled */
#ifndef CONFIG_DISABLE_MQUEUE
SYSCALL_LOOKUP(mq_close, 1, STUB_mq_close)
SYSCALL_LOOKUP(mq_notify, 2, STUB_mq_notify)
SYSCALL_LOOKUP(mq_open, 6, STUB_mq_open)
SYSCALL_LOOKUP(mq_receive, 4, STUB_mq_receive)
SYSCALL_LOOKUP(mq_send, 4, STUB_mq_send)
SYSCALL_LOOKUP(mq_timedreceive, 5, STUB_mq_timedreceive)
SYSCALL_LOOKUP(mq_timedsend, 5, STUB_mq_timedsend)
SYSCALL_LOOKUP(mq_unlink, 1, STUB_mq_unlink)
#endif
/* The following are defined only if environment variables are supported */
#ifndef CONFIG_DISABLE_ENVIRON
SYSCALL_LOOKUP(clearenv, 0, STUB_clearenv)
SYSCALL_LOOKUP(getenv, 1, STUB_getenv)
SYSCALL_LOOKUP(putenv, 1, STUB_putenv)
SYSCALL_LOOKUP(setenv, 3, STUB_setenv)
SYSCALL_LOOKUP(unsetenv, 1, STUB_unsetenv)
#endif
/* The following are defined only if networking AND sockets are supported */
#if CONFIG_NSOCKET_DESCRIPTORS > 0 && defined(CONFIG_NET)
SYSCALL_LOOKUP(accept, 3, STUB_accept)
SYSCALL_LOOKUP(bind, 3, STUB_bind)
SYSCALL_LOOKUP(connect, 3, STUB_connect)
SYSCALL_LOOKUP(getsockopt, 5, STUB_getsockopt)
SYSCALL_LOOKUP(listen, 2, STUB_listen)
SYSCALL_LOOKUP(recv, 4, STUB_recv)
SYSCALL_LOOKUP(recvfrom, 6, STUB_recvfrom)
SYSCALL_LOOKUP(send, 4, STUB_send)
SYSCALL_LOOKUP(sendto, 6, STUB_sendto)
SYSCALL_LOOKUP(setsockopt, 5, STUB_setsockopt)
SYSCALL_LOOKUP(socket, 3, STUB_socket)
#endif
/* The following is defined only if CONFIG_TASK_NAME_SIZE > 0 */
#if CONFIG_TASK_NAME_SIZE > 0
SYSCALL_LOOKUP(prctl, 5, STUB_prctl)
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
Reference in New Issue View Git Blame Copy Permalink