incubator-nuttx/include/termios.h

237 lines
10 KiB
C

/****************************************************************************
* include/termios.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __INCLUDE_TERMIOS_H
#define __INCLUDE_TERMIOS_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Terminal input modes (c_iflag in the termios structure) */
#define BRKINT (1 << 0) /* Signal interrupt on break */
#define ICRNL (1 << 1) /* Map CR to NL on input */
#define IGNBRK (1 << 2) /* Ignore break condition */
#define IGNCR (1 << 3) /* Ignore CR */
#define IGNPAR (1 << 4) /* Ignore characters with parity errors */
#define INLCR (1 << 5) /* Map NL to CR on input */
#define INPCK (1 << 6) /* Enable input parity check */
#define ISTRIP (1 << 7) /* Strip character */
#define IUCLC (1 << 8) /* Map upper-case to lower-case on input (LEGACY) */
#define IXANY (1 << 9) /* Enable any character to restart output */
#define IXOFF (1 << 10) /* Enable start/stop input control */
#define IXON (1 << 11) /* Enable start/stop output control */
#define PARMRK (1 << 12) /* Mark parity errors */
/* Terminal output modes (c_oflag in the termios structure) */
#define OPOST (1 << 0) /* Post-process output */
#define OLCUC (1 << 1) /* Map lower-case to upper-case on output (LEGACY) */
#define ONLCR (1 << 2) /* Map NL to CR-NL on output */
#define OCRNL (1 << 3) /* Map CR to NL on output */
#define ONOCR (1 << 4) /* No CR output at column 0 */
#define ONLRET (1 << 5) /* NL performs CR function */
#define OFILL (1 << 6) /* Use fill characters for delay */
#define NLDLY (1 << 7) /* Select newline delays: */
# define NL0 (0 << 7) /* Newline character type 0 */
# define NL1 (1 << 7) /* Newline character type 1 */
#define CRDLY (3 << 8) /* Select carriage-return delays: */
# define CR0 (0 << 8) /* Carriage-return delay type 0 */
# define CR1 (1 << 8) /* Carriage-return delay type 1 */
# define CR2 (2 << 8) /* Carriage-return delay type 2 */
# define CR3 (3 << 8) /* Carriage-return delay type 3 */
#define TABDLY (3 << 10) /* Select horizontal-tab delays: */
# define TAB0 (0 << 10) /* Horizontal-tab delay type 0 */
# define TAB1 (1 << 10) /* Horizontal-tab delay type 1 */
# define TAB2 (2 << 10) /* Horizontal-tab delay type 2 */
# define TAB3 (3 << 10) /* Expand tabs to spaces */
#define BSDLY (1 << 12) /* Select backspace delays: */
# define BS0 (0 << 12) /* Backspace-delay type 0 */
# define BS1 (1 << 12) /* Backspace-delay type 1 */
#define VTDLY (1 << 13) /* Select vertical-tab delays: */
# define VT0 (0 << 13) /* Vertical-tab delay type 0 */
# define VT1 (1 << 13) /* Vertical-tab delay type 1 */
#define FFDLY (1 << 14) /* Select form-feed delays: */
# define FF0 (0 << 14) /* Form-feed delay type 0 */
# define FF1 (1 << 14) /* Form-feed delay type 1 */
/* Control Modes (c_cflag in the termios structure) */
#define CSIZE (3 << 0) /* Character size: */
# define CS5 (0 << 0) /* 5 bits */
# define CS6 (1 << 0) /* 6 bits */
# define CS7 (2 << 0) /* 7 bits */
# define CS8 (3 << 0) /* 8 bits */
#define CSTOPB (1 << 2) /* Send two stop bits, else one */
#define CREAD (1 << 3) /* Enable receiver */
#define PARENB (1 << 4) /* Parity enable */
#define PARODD (1 << 5) /* Odd parity, else even */
#define HUPCL (1 << 6) /* Hang up on last close */
#define CLOCAL (1 << 7) /* Ignore modem status lines */
/* Local Modes (c_lflag in the termios structure) */
#define ECHO (1 << 0) /* Enable echo */
#define ECHOE (1 << 1) /* Echo erase character as error-correcting backspace */
#define ECHOK (1 << 2) /* Echo KILL */
#define ECHONL (1 << 3) /* Echo NL */
#define ICANON (1 << 4) /* Canonical input (erase and kill processing) */
#define IEXTEN (1 << 5) /* Enable extended input character processing */
#define ISIG (1 << 6) /* Enable signals */
#define NOFLSH (1 << 7) /* Disable flush after interrupt or quit */
#define TOSTOP (1 << 8) /* Send SIGTTOU for background output */
#define XCASE (1 << 9) /* Canonical upper/lower presentation (LEGACY) */
/* The following are subscript names for the termios c_cc array */
#define VEOF 0 /* EOF character (canonical mode) */
#define VMIN VEOF /* MIN value (Non-canonical mode) */
#define VEOL 1 /* EOL character (canonical mode) */
#define VTIME VEOL /* TIME value (Non-canonical mode) */
#define VERASE 2 /* ERASE character (canonical mode) */
#define VINTR 3 /* INTR character */
#define VKILL 4 /* KILL character (canonical mode) */
#define VQUIT 5 /* QUIT character */
#define VSTART 6 /* START character */
#define VSTOP 7 /* STOP character */
#define VSUSP 8 /* SUSP character */
#define NCCS 9 /* Size of the array c_cc for control characters */
/* Baud Rate Selection (objects of type speed_t) */
#define B0 0 /* Hang up */
#define B50 1 /* 50 baud */
#define B75 2 /* 75 baud */
#define B110 3 /* 110 baud */
#define B134 4 /* 134.5 baud */
#define B150 5 /* 150 baud */
#define B200 6 /* 200 baud */
#define B300 7 /* 300 baud */
#define B600 8 /* 600 baud */
#define B1200 9 /* 1,200 baud */
#define B1800 10 /* 1,800 baud */
#define B2400 11 /* 2,400 baud */
#define B4800 12 /* 4,800 baud */
#define B9600 13 /* 9,600 baud */
#define B19200 14 /* 19,200 baud */
#define B38400 15 /* 38,400 baud */
#define B57600 16 /* 57,600 baud */
#define B115200 17 /* 115,200 baud */
#define B230400 18 /* 230,400 baud */
#define B460800 19 /* 460,800 baud */
#define B921600 20 /* 921,600 baud */
/* Attribute Selection (used with tcsetattr()) */
#define TCSANOW 0 /* Change attributes immediately */
#define TCSADRAIN 1 /* Change attributes when output has drained */
#define TCSAFLUSH 2 /* Change attributes when output has drained; also flush pending input */
/* Line Control (used with tcflush()) */
#define TCIFLUSH 0 /* Flush pending input. Flush untransmitted output */
#define TCIOFLUSH 1 /* Flush both pending input and untransmitted output */
#define TCOFLUSH 2 /* Flush untransmitted output */
/* Constants for use with tcflow() */
#define TCIOFF 0 /* Transmit a STOP character, intended to suspend input data */
#define TCION 1 /* Transmit a START character, intended to restart input data */
#define TCOOFF 2 /* Suspend output */
#define TCOON 3 /* Restart output */
/****************************************************************************
* Public Type Definitions
****************************************************************************/
/* Baud rate selection */
typedef uint8_t speed_t; /* Used for terminal baud rates */
/* Types used within the termios structure */
typedef uint16_t tcflag_t; /* Used for terminal modes */
typedef int cc_t; /* Used for terminal special characters */
/* The termios structure */
struct termios
{
tcflag_t c_iflag /* Input modes */
tcflag_t c_oflag /* Output modes */
tcflag_t c_cflag /* Control modes */
tcflag_t c_lflag /* Local modes */
cc_t c_cc[NCCS] /* Control chars */
};
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
EXTERN speed_t cfgetispeed(const struct termios *);
EXTERN speed_t cfgetospeed(const struct termios *);
EXTERN int cfsetispeed(struct termios *, speed_t);
EXTERN int cfsetospeed(struct termios *, speed_t);
EXTERN int tcdrain(int);
EXTERN int tcflow(int, int);
EXTERN int tcflush(int, int);
EXTERN int tcgetattr(int, struct termios *);
EXTERN pid_t tcgetsid(int);
EXTERN int tcsendbreak(int, int);
EXTERN int tcsetattr(int, int, struct termios *);
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __INCLUDE_TERMIOS_H */