z80sim README
^^^^^^^^^^^^^
This port uses a primitive, emulated Z80 and the SDCC toolchain.
The instruction set emulator can be found in the NuttX SVN at
http://nuttx.svn.sourceforge.net/viewvc/nuttx/trunk/misc/sims/z80sim
The SDCC toolchain is available from http://sdcc.sourceforge.net/. All
testing has been performed using version 2.6.0 of the SDCC toolchain.
Contents
^^^^^^^^
o Configuring NuttX
o Building the SDCC toolchain
o SDCC Update
o Newer SDCC Versions
Configuring NuttX
^^^^^^^^^^^^^^^^^
ostest
This configuration performs a simple, minimal OS test using
examples/ostest. This can be configurated as follows:
cd tools
./configure.sh z80sim/ostest
cd -
. ./setenv.sh
nsh
This configuration file builds NSH (examples/nsh). This
configuration is not functional due to issues with use of the
simulated serial driver (see the TODO list).
This configuration can be selected by:
cd tools
./configure.sh z80sim/nsh
cd -
. ./setenv.sh
pashello
Configures to use examples/pashello for execution from FLASH
See examples/README.txt for information about pashello.
This configuration is not usable because the resulting binary
is too large for the z80 address space.
This configuration can be selected by:
cd tools
./configure.sh z80sim/pashello
cd -
. ./setenv.sh
Building the SDCC toolchain
^^^^^^^^^^^^^^^^^^^^^^^^^^^
The SDCC toolchain is built with the standard configure/make/make install
sequence. However, some special actions are required to generate libraries
compatible with this build. First start with the usual steps
download
unpack
cd sdcc
./configure
But before making, we need to apply a patch to the SDCC 2.6.0 source
so that the z80 assembler can handle long symbol names
Apply sdcc-2.6.0-asz80-symlen.patch
cd sdcc/device/lib
Then make the SDCC binaries
cd sdcc
make
and install SDCC:
sudo make install
SDCC Update
^^^^^^^^^^^
I have had some problems building sdcc-2.6.0 on my current UBUNTU
release (9.10). I had other problems building sdcc-2.9.0 on UBUNTU 9.10.
I suspect that the newer gcc toolchains are causing problems for these
older SDCC releases.
A 20091106 snapshot did build with no major problems on UBUNTU 9.10, but
has some compatibilty problems with the older SDCC compiler. For one, you
will need to change the Z80 assember name and options in the Make.defs
files as follows:
-AS = as-z80
+AS = sdasz80
- @$(AS) $(ASFLAGS) $2 $1
+ $(AS) $(ASFLAGS) $1
For another, I had other problems building with that 20091106 that look
like compiler bugs. If you are using UBUNTU 9.10, you may have to either
(1) downgrade your GCC compiler to a version 3.x compiler and use one of
the older stable releases, or (2) wait for the next stable SDCC release
after 2.9.0.
Newer SDCC Versions
^^^^^^^^^^^^^^^^^^^
This is the text of bug 3468951 reported on the SourceForge website:
"Some obsolete stuff in z80sim port," (submitted by Philipp Klaus Krause):
The simz80 port needs a few updates to work well with current sdcc versions,
and has some unecessary stuff:
* The linker name for Make.defs should be sdldz80
* The assembler name for Make.defs should be sdasz80
* _asm and _endasm in z80_io.c and z80_irq.c should be replaced by __asm
and __endasm
* The --stack-auto --int-long-reent --float-reent options or Make.defs should
be removed, as they have no effect on sdcc's z80 port
* The current assembler AFAIK can handle long symbol names, so the
sdcc-2.6.0-asz80-symlen.patch is unnecessary, and it and the corresponding
section from the README can be removed.
These changes have not yet been incorporated or verified.
162473f4c3