incubator-nuttx/boards/arm/samv7/same70-xplained/configs/mcuboot-loader/defconfig

81 lines
2.1 KiB
Plaintext

#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_MMCSD_SPI is not set
# CONFIG_SAMV7_SDRAMHEAP is not set
# CONFIG_SAMV7_UART0 is not set
# CONFIG_SAMV7_UART2 is not set
# CONFIG_SAMV7_UART4 is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="same70-xplained"
CONFIG_ARCH_BOARD_COMMON=y
CONFIG_ARCH_BOARD_SAME70_XPLAINED=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CHIP="samv7"
CONFIG_ARCH_CHIP_SAME70=y
CONFIG_ARCH_CHIP_SAME70Q21=y
CONFIG_ARCH_CHIP_SAME70Q=y
CONFIG_ARCH_CHIP_SAMV7=y
CONFIG_ARCH_CHIP_SAMV7_MEM_FLASH=0x200000
CONFIG_ARCH_CHIP_SAMV7_MEM_RAM=0x60000
CONFIG_ARCH_INTERRUPTSTACK=2048
CONFIG_ARCH_IRQBUTTONS=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_AT24XX_ADDR=0x57
CONFIG_AT24XX_EXTENDED=y
CONFIG_AT24XX_EXTSIZE=160
CONFIG_AT24XX_SIZE=2
CONFIG_BOARD_LATE_INITIALIZE=y
CONFIG_BOARD_LOOPSPERMSEC=51262
CONFIG_BOOT_MCUBOOT=y
CONFIG_BUILTIN=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FS_FAT=y
CONFIG_FS_PROCFS=y
CONFIG_I2CTOOL_MAXBUS=0
CONFIG_INIT_ENTRYPOINT="mcuboot_loader_main"
CONFIG_MCUBOOT_BOOTLOADER=y
CONFIG_MCUBOOT_ENABLE_LOGGING=y
CONFIG_MMCSD_MULTIBLOCK_LIMIT=1
CONFIG_MMCSD_SDIO=y
CONFIG_MTD_AT24XX=y
CONFIG_MTD_AT25=y
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=393216
CONFIG_RAM_START=0x20400000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SAMV7_FORMAT_MCUBOOT=y
CONFIG_SAMV7_GPIOA_IRQ=y
CONFIG_SAMV7_GPIOC_IRQ=y
CONFIG_SAMV7_GPIO_IRQ=y
CONFIG_SAMV7_HSMCI0=y
CONFIG_SAMV7_SDRAMC=y
CONFIG_SAMV7_SDRAMSIZE=2097152
CONFIG_SAMV7_TWIHS0=y
CONFIG_SAMV7_USART1=y
CONFIG_SAMV7_XDMAC=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_WAITPID=y
CONFIG_SDIO_BLOCKSETUP=y
CONFIG_START_DAY=24
CONFIG_START_MONTH=11
CONFIG_START_YEAR=2021
CONFIG_SYSTEM_I2CTOOL=y
CONFIG_SYSTEM_NSH=y
CONFIG_TESTING_RAMTEST=y
CONFIG_USART1_SERIAL_CONSOLE=y