Gregory Nutt 76764003a5 Add logic to enable DEBUG_NET if NET=n but WL_CC3000=y		2013-10-23 11:48:57 -06:00
..
uip	Move tcp connection into SYN_RCVD state after aception instead of bypassing and moving directly into ESTABLISHED. From Max Holtzberg.	2013-10-17 09:49:33 -06:00
.gitignore	.dSYM only needs to be in the same .gitignore files as .exe	2013-05-30 15:02:04 -06:00
Kconfig	Add logic to enable DEBUG_NET if NET=n but WL_CC3000=y	2013-10-23 11:48:57 -06:00
Makefile	Another case where we should use the routing table: There may be multiple routers on the same network. In that case, we have to search for the routing table for the router that forwards to the destination address. We do this when we determine the MAC address we want in the ARP logic	2013-10-05 19:08:57 -06:00
accept.c	First round of compile fixes for IPv6	2012-06-07 22:00:19 +00:00
bind.c	Add more low-level, thread-independent socket interfaces	2012-03-02 19:57:52 +00:00
connect.c	Add psock_connect()	2012-03-13 13:02:45 +00:00
getsockname.c	First round of compile fixes for IPv6	2012-06-07 22:00:19 +00:00
getsockopt.c	Fix bad net_clone.c compilation when CONFIG_NET_SOCKOPTS is not defined	2013-04-05 06:40:40 -06:00
listen.c	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
net_addroute.c	Clean-up routing table design.	2013-10-05 12:05:51 -06:00
net_allocroute.c	Add NSH addroute and delroute commands	2013-10-05 15:42:20 -06:00
net_arptimer.c	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
net_checksd.c	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
net_clone.c	Fix bad net_clone.c compilation when CONFIG_NET_SOCKOPTS is not defined	2013-04-05 06:40:40 -06:00
net_close.c	Changed net_close debug output to verbose. From Max Holtzberg (2013-10-17)	2013-10-17 09:13:31 -06:00
net_delroute.c	Clean-up routing table design.	2013-10-05 12:05:51 -06:00
net_dsec2timeval.c	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
net_dup.c	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
net_dup2.c	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
net_foreachroute.c	Clean-up routing table design.	2013-10-05 12:05:51 -06:00
net_internal.h	netdev_findbyaddr() will not use a routing table if one is available. It will also make a better decision in the case there there is no routing table but only a single network interface.	2013-10-05 13:16:18 -06:00
net_monitor.c	Notify the socket layer if a connection is lost before the monitoring callback has been registered. From Max Holtzberg	2013-10-11 10:04:54 -06:00
net_poll.c	Fix all occurrences of "the the" in documentation and comments	2013-08-27 09:40:19 -06:00
net_route.h	Another case where we should use the routing table: There may be multiple routers on the same network. In that case, we have to search for the routing table for the router that forwards to the destination address. We do this when we determine the MAC address we want in the ARP logic	2013-10-05 19:08:57 -06:00
net_router.c	Another case where we should use the routing table: There may be multiple routers on the same network. In that case, we have to search for the routing table for the router that forwards to the destination address. We do this when we determine the MAC address we want in the ARP logic	2013-10-05 19:08:57 -06:00
net_sendfile.c	net_sendfile: Let the ACK callback handle the REXMIT flag and don't return until all data has been ACK'd. From Max Holtzberg	2013-10-17 09:54:48 -06:00
net_sockets.c	Clean-up routing table design.	2013-10-05 12:05:51 -06:00
net_timeo.c	Correct a buffer size error in the STM32 ethernet driver	2012-02-18 22:09:09 +00:00
net_timeval2dsec.c	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
net_vfcntl.c	Clean up some naming: fd vs. fildes vs. filedes and filep vs filp	2013-09-28 16:50:07 -06:00
netdev_count.c	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
netdev_findbyaddr.c	netdev_findbyaddr() will not use a routing table if one is available. It will also make a better decision in the case there there is no routing table but only a single network interface.	2013-10-05 13:16:18 -06:00
netdev_findbyname.c	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
netdev_foreach.c	Move all non-standard, NuttX header files into include/nuttx/net	2012-03-03 23:18:34 +00:00
netdev_ioctl.c	Fix ordering of operations in network ioctl handling. We need to able to distinguish an error because the command was not recognized vs. other kinds of error	2013-10-05 16:43:10 -06:00
netdev_register.c	Fix a deadlock when using the NSH ifconfig command over Telnet	2012-03-13 20:51:48 +00:00
netdev_router.c	SAMA5: LCDC driver progress	2013-10-07 12:05:16 -06:00
netdev_rxnotify.c	Use the new signature of rxnotify caused by the routing table. From Max Holtzberg	2013-10-06 07:38:15 -06:00
netdev_sem.c	Fix a deadlock when using the NSH ifconfig command over Telnet	2012-03-13 20:51:48 +00:00
netdev_txnotify.c	Use the new signature of rxnotify caused by the routing table. From Max Holtzberg	2013-10-06 07:38:15 -06:00
netdev_unregister.c	Email address change in nuttx/	2012-09-13 18:32:24 +00:00
recv.c	Add new psock layer; telnet session is now wrapped in a character device	2012-01-30 21:29:59 +00:00
recvfrom.c	Changed the meaning of the uip_*input functions. They now return success when a packet is dropped; This is needed for the ENCX24J600 driver that must make a decision to return the packet or not: It should not retain dropped packets. From Max Holtzberg	2013-10-11 10:48:00 -06:00
send.c	TCP: Change how initial MSS is handled. From Max Holtzberg	2013-10-17 09:45:38 -06:00
sendto.c	Changed the meaning of the uip_*input functions. They now return success when a packet is dropped; This is needed for the ENCX24J600 driver that must make a decision to return the packet or not: It should not retain dropped packets. From Max Holtzberg	2013-10-11 10:48:00 -06:00
setsockopt.c	Fix bad net_clone.c compilation when CONFIG_NET_SOCKOPTS is not defined	2013-04-05 06:40:40 -06:00
socket.c	Add more low-level, thread-independent socket interfaces	2012-03-02 19:57:52 +00:00