incubator-nuttx/include/net/if.h

221 lines
10 KiB
C

/*******************************************************************************************
* include/net/if.h
*
* Copyright (C) 2007, 2008, 2012, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
*******************************************************************************************/
#ifndef __INCLUDE_NET_IF_H
#define __INCLUDE_NET_IF_H
/*******************************************************************************************
* Included Files
*******************************************************************************************/
#include <sys/socket.h>
/*******************************************************************************************
* Pre-Processor Definitions
*******************************************************************************************/
/* Sizing parameters */
#define IFNAMSIZ 6 /* Older naming standard */
#define IF_NAMESIZE 6 /* Newer naming standard */
#define IFHWADDRLEN 6
/* Interface flag bits */
#define IFF_DOWN (1 << 0) /* Interface is down */
#define IFF_UP (1 << 1) /* Interface is up */
#define IFF_RUNNING (1 << 2) /* Carrier is available */
#define IFF_IPv6 (1 << 3) /* Configured for IPv6 packet (vs ARP or IPv4) */
#define IFF_NOARP (1 << 7) /* ARP is not required for this packet */
/* Interface flag helpers */
#define IFF_SET_DOWN(f) do { (f) |= IFF_DOWN; } while (0)
#define IFF_SET_UP(f) do { (f) |= IFF_UP; } while (0)
#define IFF_SET_RUNNING(f) do { (f) |= IFF_RUNNING; } while (0)
#define IFF_SET_NOARP(f) do { (f) |= IFF_NOARP; } while (0)
#define IFF_CLR_DOWN(f) do { (f) &= ~IFF_DOWN; } while (0)
#define IFF_CLR_UP(f) do { (f) &= ~IFF_UP; } while (0)
#define IFF_CLR_RUNNING(f) do { (f) &= ~IFF_RUNNING; } while (0)
#define IFF_CLR_NOARP(f) do { (f) &= ~IFF_NOARP; } while (0)
#define IFF_IS_DOWN(f) (((f) & IFF_DOWN) != 0)
#define IFF_IS_UP(f) (((f) & IFF_UP) != 0)
#define IFF_IS_RUNNING(f) (((f) & IFF_RUNNING) != 0)
#define IFF_IS_NOARP(f) (((f) & IFF_NOARP) != 0)
/* We only need to manage the IPv6 bit if both IPv6 and IPv4 are supported. Otherwise,
* we can save a few bytes by ignoring it.
*/
#if defined(CONFIG_NET_IPv4) && defined(CONFIG_NET_IPv6)
# define IFF_SET_IPv6(f) do { (f) |= IFF_IPv6; } while (0)
# define IFF_CLR_IPv6(f) do { (f) &= ~IFF_IPv6; } while (0)
# define IFF_IS_IPv6(f) (((f) & IFF_IPv6) != 0)
# define IFF_SET_IPv4(f) IFF_CLR_IPv6(f)
# define IFF_CLR_IPv4(f) IFF_SET_IPv6(f)
# define IFF_IS_IPv4(f) (!IFF_IS_IPv6(f))
#elif defined(CONFIG_NET_IPv6)
# define IFF_SET_IPv6(f)
# define IFF_CLR_IPv6(f)
# define IFF_IS_IPv6(f) (1)
# define IFF_SET_IPv4(f)
# define IFF_CLR_IPv4(f)
# define IFF_IS_IPv4(f) (0)
#else /* if defined(CONFIG_NET_IPv4) */
# define IFF_SET_IPv6(f)
# define IFF_CLR_IPv6(f)
# define IFF_IS_IPv6(f) (0)
# define IFF_SET_IPv4(f)
# define IFF_CLR_IPv4(f)
# define IFF_IS_IPv4(f) (1)
#endif
/*******************************************************************************************
* Public Type Definitions
*******************************************************************************************/
/* Structure passed with the SIOCMIINOTIFY ioctl command to enable notification of
* of PHY state changes.
*/
struct mii_iotcl_notify_s
{
pid_t pid; /* PID of the task to receive the signal. Zero means "this task" */
uint8_t signo; /* Signal number to use when signalling */
FAR void *arg; /* An argument that will accompany the signal callback */
};
/* Structure passed to read from or write to the MII/PHY management interface via the
* SIOCxMIIREG ioctl commands.
*/
struct mii_ioctl_data_s
{
uint16_t phy_id; /* PHY device address */
uint16_t reg_num; /* PHY register address */
uint16_t val_in; /* PHY input data */
uint16_t val_out; /* PHY output data */
};
/* There are two forms of the I/F request structure. One for IPv6 and one for IPv4.
* Notice that they are (and must be) cast compatible and really different only
* in the size of the structure allocation.
*
* This is the I/F request that should be used with IPv6.
*/
struct lifreq
{
char lifr_name[IFNAMSIZ]; /* Network device name (e.g. "eth0") */
union
{
struct sockaddr_storage lifru_addr; /* IP Address */
struct sockaddr_storage lifru_dstaddr; /* P-to-P Address */
struct sockaddr_storage lifru_broadaddr; /* Broadcast address */
struct sockaddr_storage lifru_netmask; /* Netmask */
struct sockaddr lifru_hwaddr; /* MAC address */
int lifru_count; /* Number of devices */
int lifru_mtu; /* MTU size */
uint8_t lifru_flags; /* Interface flags */
struct mii_iotcl_notify_s llfru_mii_notify; /* PHY event notification */
struct mii_ioctl_data_s lifru_mii_data; /* MII request data */
} lifr_ifru;
};
#define lifr_addr lifr_ifru.lifru_addr /* IP address */
#define lifr_dstaddr lifr_ifru.lifru_dstaddr /* P-to-P Address */
#define lifr_broadaddr lifr_ifru.lifru_broadaddr /* Broadcast address */
#define lifr_netmask lifr_ifru.lifru_netmask /* Interface net mask */
#define lifr_hwaddr lifr_ifru.lifru_hwaddr /* MAC address */
#define lifr_mtu lifr_ifru.lifru_mtu /* MTU */
#define lifr_count lifr_ifru.lifru_count /* Number of devices */
#define lifr_flags lifr_ifru.lifru_flags /* interface flags */
#define lifr_mii_notify_pid lifr_ifru.llfru_mii_notify.pid /* PID to be notified */
#define lifr_mii_notify_signo lifr_ifru.llfru_mii_notify.signo /* Signal to notify with */
#define lifr_mii_notify_arg lifr_ifru.llfru_mii_notify.arg /* sigval argument */
#define lifr_mii_phy_id lifr_ifru.lifru_mii_data.phy_id /* PHY device address */
#define lifr_mii_reg_num lifr_ifru.lifru_mii_data.reg_num /* PHY register address */
#define lifr_mii_val_in lifr_ifru.lifru_mii_data.val_in /* PHY input data */
#define lifr_mii_val_out lifr_ifru.lifru_mii_data.val_out /* PHY output data */
/* This is the I/F request that should be used with IPv4. */
struct ifreq
{
char ifr_name[IFNAMSIZ]; /* Network device name (e.g. "eth0") */
union
{
struct sockaddr ifru_addr; /* IP Address */
struct sockaddr ifru_dstaddr; /* P-to-P Address */
struct sockaddr ifru_broadaddr; /* Broadcast address */
struct sockaddr ifru_netmask; /* Netmask */
struct sockaddr ifru_hwaddr; /* MAC address */
int ifru_count; /* Number of devices */
int ifru_mtu; /* MTU size */
uint8_t ifru_flags; /* Interface flags */
struct mii_iotcl_notify_s ifru_mii_notify; /* PHY event notification */
struct mii_ioctl_data_s ifru_mii_data; /* MII request data */
} ifr_ifru;
};
#define ifr_addr ifr_ifru.ifru_addr /* IP address */
#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* P-to-P Address */
#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* Broadcast address */
#define ifr_netmask ifr_ifru.ifru_netmask /* Interface net mask */
#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
#define ifr_mtu ifr_ifru.ifru_mtu /* MTU */
#define ifr_count ifr_ifru.ifru_count /* Number of devices */
#define ifr_flags ifr_ifru.ifru_flags /* interface flags */
#define ifr_mii_notify_pid ifr_ifru.ifru_mii_notify.pid /* PID to be notified */
#define ifr_mii_notify_signo ifr_ifru.ifru_mii_notify.signo /* Signal to notify with */
#define ifr_mii_notify_arg ifr_ifru.ifru_mii_notify.arg /* sigval argument */
#define ifr_mii_phy_id ifr_ifru.ifru_mii_data.phy_id /* PHY device address */
#define ifr_mii_reg_num ifr_ifru.ifru_mii_data.reg_num /* PHY register address */
#define ifr_mii_val_in ifr_ifru.ifru_mii_data.val_in /* PHY input data */
#define ifr_mii_val_out ifr_ifru.ifru_mii_data.val_out /* PHY output data */
/*******************************************************************************************
* Public Function Prototypes
*******************************************************************************************/
#endif /* __INCLUDE_NET_IF_H */