OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/drivers/ioexpander/skeleton.c

768 lines
22 KiB
C
Raw Blame History

/****************************************************************************
* drivers/ioexpander/skeleton.c
*
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <semaphore.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/kmalloc.h>
#include <nuttx/ioexpander/ioexpander.h>
#include <nuttx/ioexpander/skeleton.h>
#include "skeleton.h"
#if defined(CONFIG_IOEXPANDER_skeleton)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
/* This type represents on registered pin interrupt callback */
struct skel_callback_s
{
ioe_pinset_t pinset; /* Set of pin interrupts that will generate
* the callback. */
ioe_callback_t cbfunc; /* The saved callback function pointer */
};
#endif
/* This structure represents the state of the I/O Expander driver */
struct skel_dev_s
{
struct ioexpander_dev_s dev; /* Nested structure to allow casting as public gpio
* expander. */
#ifdef CONFIG_skeleton_MULTIPLE
FAR struct skel_dev_s *flink; /* Supports a singly linked list of drivers */
#endif
sem_t exclsem; /* Mutual exclusion */
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
struct work_s work; /* Supports the interrupt handling "bottom half" */
/* Saved callback information for each I/O expander client */
struct skel_callback_s cb[CONFIG_skeleton_INT_NCALLBACKS];
#endif
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static void skel_lock(FAR struct skel_dev_s *priv);
static int skel_direction(FAR struct ioexpander_dev_s *dev, uint8_t pin,
int dir);
static int skel_option(FAR struct ioexpander_dev_s *dev, uint8_t pin,
int opt, void *val);
static int skel_writepin(FAR struct ioexpander_dev_s *dev, uint8_t pin,
bool value);
static int skel_readpin(FAR struct ioexpander_dev_s *dev, uint8_t pin,
FAR bool *value);
static int skel_readbuf(FAR struct ioexpander_dev_s *dev, uint8_t pin,
FAR bool *value);
#ifdef CONFIG_IOEXPANDER_MULTIPIN
static int skel_multiwritepin(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values, int count);
static int skel_multireadpin(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values, int count);
static int skel_multireadbuf(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values, int count);
#endif
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
static int skel_attach(FAR struct ioexpander_dev_s *dev,
ioe_pinset_t pinset, ioe_callback_t callback);
#endif
static void skel_irqworker(void *arg);
static void skel_interrupt(FAR void *arg);
/****************************************************************************
* Private Data
****************************************************************************/
#ifndef CONFIG_skeleton_MULTIPLE
/* If only a single device is supported, then the driver state structure may
* as well be pre-allocated.
*/
static struct skel_dev_s g_skel;
#endif
/* I/O expander vtable */
static const struct ioexpander_ops_s g_skel_ops =
{
skel_direction,
skel_option,
skel_writepin,
skel_readpin,
skel_readbuf
#ifdef CONFIG_IOEXPANDER_MULTIPIN
, skel_multiwritepin
, skel_multireadpin
, skel_multireadbuf
#endif
#ifdef CONFIG_IOEXPANDER_INT_ENABLE
, skel_attach
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: skel_lock
*
* Description:
* Get exclusive access to the I/O Expander
*
****************************************************************************/
static void skel_lock(FAR struct skel_dev_s *priv)
{
while (sem_wait(&priv->exclsem) < 0)
{
/* EINTR is the only expected error from sem_wait() */
DEBUGASSERT(errno == EINTR);
}
}
#define skel_unlock(p) sem_post(&(p)->exclsem)
/****************************************************************************
* Name: skel_direction
*
* Description:
* Set the direction of an ioexpander pin. Required.
*
* Input Parameters:
* dev - Device-specific state data
* pin - The index of the pin to alter in this call
* dir - One of the IOEXPANDER_DIRECTION_ macros
*
* Returned Value:
* 0 on success, else a negative error code
*
****************************************************************************/
static int skel_direction(FAR struct ioexpander_dev_s *dev, uint8_t pin,
int direction)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev;
int ret;
gpioinfo("pin=%u direction=%s\n",
pin, (direction == IOEXPANDER_DIRECTION_IN) ? "IN" : "OUT");
DEBUGASSERT(priv != NULL && pin < CONFIG_IOEXPANDER_NPINS &&
(direction == IOEXPANDER_DIRECTION_IN ||
direction == IOEXPANDER_DIRECTION_IN));
/* Get exclusive access to the I/O Expander */
skel_lock(priv);
/* Set the pin direction in the I/O Expander */
#warning Missing logic
skel_unlock(priv);
return ret;
}
/****************************************************************************
* Name: skel_option
*
* Description:
* Set pin options. Required.
* Since all IO expanders have various pin options, this API allows setting
* pin options in a flexible way.
*
* Input Parameters:
* dev - Device-specific state data
* pin - The index of the pin to alter in this call
* opt - One of the IOEXPANDER_OPTION_ macros
* val - The option's value
*
* Returned Value:
* 0 on success, else a negative error code
*
****************************************************************************/
static int skel_option(FAR struct ioexpander_dev_s *dev, uint8_t pin,
int opt, FAR void *val)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev;
int ret = -ENOSYS;
gpioinfo("addr=%02x pin=%u option=%u\n", priv->addr, pin, opt);
DEBUGASSERT(priv != NULL);
/* Check for pin polarity inversion. */
if (opt == IOEXPANDER_OPTION_INVERT)
{
/* Get exclusive access to the I/O Expander */
skel_lock(priv);
/* Set the pin option */
#warning Missing logic
skel_unlock(priv);
}
return ret;
}
/****************************************************************************
* Name: skel_writepin
*
* Description:
* Set the pin level. Required.
*
* Input Parameters:
* dev - Device-specific state data
* pin - The index of the pin to alter in this call
* val - The pin level. Usually TRUE will set the pin high,
* except if OPTION_INVERT has been set on this pin.
*
* Returned Value:
* 0 on success, else a negative error code
*
****************************************************************************/
static int skel_writepin(FAR struct ioexpander_dev_s *dev, uint8_t pin,
bool value)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev;
int ret;
gpioinfo("pin=%u value=%u\n", pin, value);
DEBUGASSERT(priv != NULL && pin < CONFIG_IOEXPANDER_NPINS);
/* Get exclusive access to the I/O Expander */
skel_lock(priv);
/* Write the pin value */
#warning Missing logic
skel_unlock(priv);
return ret;
}
/****************************************************************************
* Name: skel_readpin
*
* Description:
* Read the actual PIN level. This can be different from the last value written
* to this pin. Required.
*
* Input Parameters:
* dev - Device-specific state data
* pin - The index of the pin
* valptr - Pointer to a buffer where the pin level is stored. Usually TRUE
* if the pin is high, except if OPTION_INVERT has been set on this pin.
*
* Returned Value:
* 0 on success, else a negative error code
*
****************************************************************************/
static int skel_readpin(FAR struct ioexpander_dev_s *dev, uint8_t pin,
FAR bool *value)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev;
int ret;
gpioinfo("pin=%u\n", priv->addr);
DEBUGASSERT(priv != NULL && pin < CONFIG_IOEXPANDER_NPINS && value != NULL);
/* Get exclusive access to the I/O Expander */
skel_lock(priv);
/* Read the pin value */
#warning Missing logic
/* Return the pin value via the value pointer */
#warning Missing logic
skel_unlock(priv);
return ret;
}
/****************************************************************************
* Name: skel_readbuf
*
* Description:
* Read the buffered pin level.
* This can be different from the actual pin state. Required.
*
* Input Parameters:
* dev - Device-specific state data
* pin - The index of the pin
* valptr - Pointer to a buffer where the level is stored.
*
* Returned Value:
* 0 on success, else a negative error code
*
****************************************************************************/
static int skel_readbuf(FAR struct ioexpander_dev_s *dev, uint8_t pin,
FAR bool *value)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev;
int ret;
/* Get exclusive access to the I/O Expander */
skel_lock(priv);
/* Read the buffered pin level */
#warning Missing logic
skel_unlock(priv);
return ret;
}
/****************************************************************************
* Name: skel_getmultibits
*
* Description:
* Read multiple bits from I/O Expander registers.
*
****************************************************************************/
#ifdef CONFIG_IOEXPANDER_MULTIPIN
static int skel_getmultibits(FAR struct skel_dev_s *priv, FAR uint8_t *pins,
FAR bool *values, int count)
{
ioe_pinset_t pinset;
int pin;
int ret = OK;
int i;
/* Read the pinset from the IO-Expander hardware */
#warning Missing logic
/* Read the requested bits */
for (i = 0; i < count; i++)
{
pin = pins[i];
if (pin >= CONFIG_IOEXPANDER_NPINS)
{
return -ENXIO;
}
values[i] = ((pinset & (1 << pin) != 0);
}
return OK;
}
#endif
/****************************************************************************
* Name: skel_multiwritepin
*
* Description:
* Set the pin level for multiple pins. This routine may be faster than
* individual pin accesses. Optional.
*
* Input Parameters:
* dev - Device-specific state data
* pins - The list of pin indexes to alter in this call
* val - The list of pin levels.
*
* Returned Value:
* 0 on success, else a negative error code
*
****************************************************************************/
#ifdef CONFIG_IOEXPANDER_MULTIPIN
static int skel_multiwritepin(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values,
int count)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev;
ioe_pinset_t pinset;
int pin;
int ret;
int i;
/* Get exclusive access to the I/O Expander */
skel_lock(priv);
/* Read the pinset from the IO-Expander hardware */
#warning Missing logic
/* Apply the user defined changes */
for (i = 0; i < count; i++)
{
pin = pins[i];
if (pin >= CONFIG_IOEXPANDER_NPINS)
{
skel_unlock(priv);
return -ENXIO;
}
if (values[i])
{
pinset |= (1 << pin);
}
else
{
pinset &= ~(1 << pin);
}
}
/* Now write back the new pins states */
#warning Missing logic
skel_unlock(priv);
return ret;
}
#endif
/****************************************************************************
* Name: skel_multireadpin
*
* Description:
* Read the actual level for multiple pins. This routine may be faster than
* individual pin accesses. Optional.
*
* Input Parameters:
* dev - Device-specific state data
* pin - The list of pin indexes to read
* valptr - Pointer to a buffer where the pin levels are stored.
*
* Returned Value:
* 0 on success, else a negative error code
*
****************************************************************************/
#ifdef CONFIG_IOEXPANDER_MULTIPIN
static int skel_multireadpin(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values,
int count)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev;
int ret;
gpioinfo("count=%u\n", count);
DEBUGASSERT(priv != NULL && pins != NULL && values != NULL && count > 0);
/* Get exclusive access to the I/O Expander */
skel_lock(priv);
ret = skel_getmultibits(priv, pins, values, count);
skel_unlock(priv);
return ret;
}
#endif
/****************************************************************************
* Name: skel_multireadbuf
*
* Description:
* Read the buffered level of multiple pins. This routine may be faster than
* individual pin accesses. Optional.
*
* Input Parameters:
* dev - Device-specific state data
* pin - The index of the pin
* valptr - Pointer to a buffer where the buffered levels are stored.
*
* Returned Value:
* 0 on success, else a negative error code
*
****************************************************************************/
#ifdef CONFIG_IOEXPANDER_MULTIPIN
static int skel_multireadbuf(FAR struct ioexpander_dev_s *dev,
FAR uint8_t *pins, FAR bool *values,
int count)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev;
int ret;
gpioinfo("count=%u\n", count);
DEBUGASSERT(priv != NULL && pins != NULL && values != NULL && count > 0);
/* Get exclusive access to the I/O Expander */
skel_lock(priv);
ret = skel_getmultibits(priv, pins, values, count);
skel_unlock(priv);
return ret;
}
#endif
/****************************************************************************
* Name: skel_attach
*
* Description:
* Attach a pin interrupt callback function.
*
* Input Parameters:
* dev - Device-specific state data
* pinset - The set of pin events that will generate the callback
* callback - The pointer to callback function. NULL will detach the
* callback.
*
* Returned Value:
* 0 on success, else a negative error code
*
****************************************************************************/
#ifdef CONFIG_skeleton_INT_ENABLE
static int skel_attach(FAR struct ioexpander_dev_s *dev, ioe_pinset_t pinset,
ioe_callback_t callback)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)dev;
int ret;
int i;
/* Get exclusive access to the I/O Expander */
skel_lock(priv);
/* Find and available in entry in the callback table */
ret = -ENOSPC;
for (i = 0; i < CONFIG_skeleton_INT_NCALLBACKS; i++)
{
/* Is this entry available (i.e., no callback attached) */
if (priv->cb[i].cbfunc == NULL)
{
/* Yes.. use this entry */
priv->cb[i].pinset = pinset;
priv->cb[i].cbfunc = callback;
ret = OK;
}
}
/* Add this callback to the table */
skel_unlock(priv);
return ret;
}
#endif
/****************************************************************************
* Name: skel_irqworker
*
* Description:
* Handle GPIO interrupt events (this function actually executes in the
* context of the worker thread).
*
****************************************************************************/
#ifdef CONFIG_skeleton_INT_ENABLE
static void skel_irqworker(void *arg)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s *)arg;
ioe_pinset_t pinset;
int ret;
int i;
/* Read the pinset from the IO-Expander hardware */
#warning Missing logic
/* Perform pin interrupt callbacks */
for (i = 0; i < CONFIG_skeleton_INT_NCALLBACKS; i++)
{
/* Is this entry valid (i.e., callback attached)? If so, did andy of
* the requested pin interrupts occur?
*/
if (priv->cb[i].cbfunc != NULL)
{
/* Did any of the requested pin interrupts occur? */
ioe_pinset_t match = pinset & priv->cb[i].pinset;
if (match != 0)
{
/* Yes.. perform the callback */
(void)priv->cb[i].cbfunc(&priv->dev, match);
}
}
}
/* Re-enable interrupts */
#warning Missing logic
}
#endif
/****************************************************************************
* Name: skel_interrupt
*
* Description:
* Handle GPIO interrupt events (this function executes in the
* context of the interrupt).
*
* NOTE: A more typical prototype for an interrupt handler would be:
*
* int skel_interrupt(int irq, FAR void *context, FAR void *arg)
*
* However, it is assume that the lower half, board specific interface
* can provide intercept the actual interrupt, and call this function with
* the arg that can be mapped to the provide driver structure instance.
*
* Presumably the lower level interface provides an attach() method that
* provides both the address of skel_interrupt() as well as the arg value.
*
****************************************************************************/
#ifdef CONFIG_skeleton_INT_ENABLE
static void skel_interrupt(FAR void *arg)
{
FAR struct skel_dev_s *priv = (FAR struct skel_dev_s )arg;
DEBUGASSERT(priv != NULL);
/* Defer interrupt processing to the worker thread. This is not only
* much kinder in the use of system resources but is probably necessary
* to access the I/O expander device.
*
* Notice that further GPIO interrupts are disabled until the work is
* actually performed. This is to prevent overrun of the worker thread.
* Interrupts are re-enabled in skel_irqworker() when the work is
* completed.
*/
if (work_available(&priv->work))
{
/* Disable interrupts */
#warning Missing logic
/* Schedule interrupt related work on the high priority worker thread. */
work_queue(HPWORK, &priv->work, skel_irqworker,
(FAR void *)priv, 0);
}
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: skel_initialize
*
* Description:
* Initialize a I/O Expander device.
*
* NOTE: There are no arguments to the initialization function this
* skelton example. Typical implementations take two arguments:
*
* 1) A reference to an I2C or SPI interface used to interace with the
* device, and
* 2) A read-only configuration structure that provides things like: I2C
* or SPI characteristics and callbacks to attache, enable, and disable
* interrupts.
*
****************************************************************************/
FAR struct ioexpander_dev_s *skel_initialize(void)
{
FAR struct skel_dev_s *priv;
#ifdef CONFIG_skeleton_MULTIPLE
/* Allocate the device state structure */
priv = (FAR struct skel_dev_s *)kmm_zalloc(sizeof(struct skel_dev_s));
if (!priv)
{
gpioerr("ERROR: Failed to allocate driver instance\n");
return NULL;
}
#else
/* Use the one-and-only I/O Expander driver instance */
priv = &g_skel;
#endif
/* Initialize the device state structure */
/* NOTE: Normally you would also save the I2C/SPI device interface and
* any configuration information here as well.
*/
priv->dev.ops = &g_skel_ops;
#ifdef CONFIG_skeleton_INT_ENABLE
/* Attach the I/O expander interrupt handler and enable interrupts */
#warning Missing logic
#endif
sem_init(&priv->exclsem, 0, 1);
return &priv->dev;
}
#endif /* CONFIG_IOEXPANDER_skeleton */
Reference in New Issue View Git Blame Copy Permalink