incubator-nuttx/drivers/crypto/pnt/sm_i2c.c

117 lines
3.6 KiB
C

/****************************************************************************
* drivers/crypto/pnt/sm_i2c.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* Copyright 2023 NXP */
/****************************************************************************
* Included Files
****************************************************************************/
#include "sm_i2c.h"
#include "../se05x_internal.h"
#include <nuttx/crypto/se05x.h>
#include <nuttx/i2c/i2c_master.h>
/****************************************************************************
* Private Functions
****************************************************************************/
static int se05x_i2c_write(FAR struct se05x_dev_s *priv,
FAR const uint8_t *buffer, ssize_t buflen)
{
struct i2c_msg_s msg;
int ret;
/* Setup for the transfer */
msg.frequency = priv->config->frequency;
msg.addr = priv->config->address;
msg.flags = 0;
msg.buffer = (FAR uint8_t *)buffer; /* Override const */
msg.length = buflen;
/* Then perform the transfer. */
ret = I2C_TRANSFER(priv->i2c, &msg, 1);
return (ret >= 0) ? OK : ret;
}
static int se05x_i2c_read(FAR struct se05x_dev_s *priv, FAR uint8_t *buffer,
ssize_t buflen)
{
struct i2c_msg_s msg;
int ret;
/* Setup for the transfer */
msg.frequency = priv->config->frequency;
msg.addr = priv->config->address;
msg.flags = I2C_M_READ;
msg.buffer = buffer;
msg.length = buflen;
/* Then perform the transfer. */
ret = I2C_TRANSFER(priv->i2c, &msg, 1);
return (ret >= 0) ? OK : ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: axI2CInit
*
* Description:
* Initialize i2c (plug and trust mw hook)
* pDevName should contain the private device struct
*
****************************************************************************/
unsigned int sm_i2c_init(FAR void **conn_ctx, FAR const char *dev_name)
{
*conn_ctx = (FAR void *)dev_name;
return I2C_OK;
}
void sm_i2c_term(FAR void *conn_ctx, int mode)
{
(void)conn_ctx;
(void)mode;
}
unsigned int sm_i2c_write(FAR void *conn_ctx, unsigned char bus,
unsigned char addr, FAR unsigned char *tx,
unsigned short tx_len)
{
(void)bus;
int result = se05x_i2c_write(conn_ctx, tx, (ssize_t)tx_len);
return result == OK ? I2C_OK : I2C_FAILED;
}
unsigned int sm_i2c_read(FAR void *conn_ctx, uint8_t bus, uint8_t addr,
FAR uint8_t *rx, unsigned short rx_len)
{
(void)bus;
int result = se05x_i2c_read(conn_ctx, rx, (ssize_t)rx_len);
return result == OK ? I2C_OK : I2C_FAILED;
}