incubator-nuttx

History

hujun5 4cb419866f arch: inline up_testset in arm arm64 riscv xtensa test: Configuring NuttX and compile: $ ./tools/configure.sh -l qemu-armv8a:nsh_smp $ make Running with qemu $ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \ -machine virt,virtualization=on,gic-version=3 \ -net none -chardev stdio,id=con,mux=on -serial chardev:con \ -mon chardev=con,mode=readline -kernel ./nuttx Signed-off-by: hujun5 <hujun5@xiaomi.com>		2024-08-21 01:45:10 +08:00
..
configs/nsh	arch: inline up_testset in arm arm64 riscv xtensa	2024-08-21 01:45:10 +08:00
include	…
scripts	nuttx/boards:Uniform initialization format for init_array.	2024-08-19 19:48:32 +08:00
src	…
Kconfig	…
README.txt	…

README.txt

README.txt
==========

This board configuration will use QEMU to emulate generic ARM v8-M series
hardware platform and provides support for these devices:

 - ARM Generic Timer
 - CMSDK UART controller

Contents
========
  - Getting Started
  - Status
  - Platform Features
  - Debugging with QEMU
  - FPU Support and Performance
  - SMP Support
  - References

Getting Started
===============

1. Configuring and running
  1.1 Single Core
   Configuring NuttX and compile:
   $ ./tools/configure.sh -l mps3-an547:nsh
   $ make
   Running with qemu
   $ qemu-system-arm -M mps3-an547 -nographic -kernel nuttx.bin

Debugging with QEMU
===================

The nuttx ELF image can be debugged with QEMU.

1. To debug the nuttx (ELF) with symbols, make sure the following change have
   applied to defconfig.

+CONFIG_DEBUG_SYMBOLS=y

2. Run QEMU(at shell terminal 1)

   $ qemu-system-arm -M mps3-an547 -nographic -kernel nuttx.bin -S -s

3. Run gdb with TUI, connect to QEMU, load nuttx and continue (at shell terminal 2)

   $ arm-none-eabi-gdb -tui --eval-command='target remote localhost:1234' nuttx