406 lines
16 KiB
ReStructuredText
406 lines
16 KiB
ReStructuredText
.. _nxflat:
|
|
|
|
======
|
|
NXFLAT
|
|
======
|
|
|
|
Overview
|
|
========
|
|
|
|
Functionality
|
|
-------------
|
|
|
|
NXFLAT is a customized and simplified version of binary format
|
|
implemented a few years ago called
|
|
`XFLAT <http://xflat.sourceforge.net/>`__ With the NXFLAT binary format
|
|
you will be able to do the following:
|
|
|
|
- Place separately linked programs in a file system, and
|
|
- Execute those programs by dynamically linking them to the base NuttX
|
|
code.
|
|
|
|
This allows you to extend the NuttX base code after it has been written
|
|
into FLASH. One motivation for implementing NXFLAT is support clean CGI
|
|
under an HTTPD server.
|
|
|
|
This feature is especially attractive when combined with the NuttX ROMFS
|
|
support: ROMFS allows you to execute programs in place (XIP) in flash
|
|
without copying anything other than the .data section to RAM. In fact,
|
|
the initial NXFLAT release only worked on ROMFS. Later extensions also
|
|
support execution NXFLAT binaries from an SRAM copy as well.
|
|
|
|
This NuttX feature includes:
|
|
|
|
- A dynamic loader that is built into the NuttX core (See
|
|
`GIT <https://github.com/apache/nuttx/blob/master/binfmt/>`__).
|
|
- Minor changes to RTOS to support position independent code, and
|
|
- A linker to bind ELF binaries to produce the NXFLAT binary format
|
|
(See GIT).
|
|
|
|
Background
|
|
----------
|
|
|
|
NXFLAT is derived from `XFLAT <http://xflat.sourceforge.net/>`__. XFLAT
|
|
is a toolchain add that provides full shared library and XIP executable
|
|
support for processors that have no Memory Management Unit
|
|
(MMU:sup:`1`). NXFLAT is greatly simplified for the deeply embedded
|
|
environment targeted by NuttX:
|
|
|
|
- NXFLAT does not support shared libraries, because
|
|
- NXFLAT does not support *exportation* of symbol values from a module
|
|
|
|
Rather, the NXFLAT module only *imports* symbol values. In the NXFLAT
|
|
model, the (PIC:sup:`2`) NXFLAT module resides in a FLASH file system
|
|
and when it is loaded at run time, it is dynamically linked only to the
|
|
(non-PIC) base NuttX code: The base NuttX *exports* a symbol table; the
|
|
NXFLAT module *imports* those symbol value to dynamically bind the
|
|
module to the base code.
|
|
|
|
Limitations
|
|
-----------
|
|
|
|
- **ROMFS (or RAM mapping) Only**:
|
|
The current NXFLAT release will work only with either (1) NXFLAT
|
|
executable modules residing on a ROMFS file system, or (2) executables
|
|
residing on other file systems provided that CONFIG_FS_RAMMAP is
|
|
defined. This limitation is because the loader depends on the capability
|
|
to mmap() the code segment. See the NuttX User Guide for further information.
|
|
|
|
NUTTX does not provide any general kind of file mapping capability.
|
|
In fact, true file mapping is only possible with MCUs that provide an MMU1.
|
|
Without an MMU, file system may support eXecution In Place (XIP) to mimic
|
|
file mapping. Only the ROMFS file system supports that kind of XIP execution
|
|
need by NXFLAT.
|
|
|
|
It is also possible to simulate file mapping by allocating memory, copying
|
|
the NXFLAT binary file into memory, and executing from the copy of the
|
|
executable file in RAM. That capability can be enabled with the CONFIG_FS_RAMMAP
|
|
configuration option. With that option enabled, NXFLAT will work that kind
|
|
of file system but will require copying of all NXFLAT executables to RAM.
|
|
|
|
- **GCC/ARM/Cortex-M3/4 Only**:
|
|
At present, the NXFLAT toolchain is only available for ARM and Cortex-M3/4 (thumb2) targets.
|
|
|
|
- **Read-Only Data in RAM**:
|
|
With older GCC compilers (at least up to 4.3.3), read-only data must
|
|
reside in RAM. In code generated by GCC, all data references are
|
|
indexed by the PIC2 base register (that is usually R10 or sl for the
|
|
ARM processors). The includes read-only data (.rodata). Embedded
|
|
firmware developers normally like to keep .rodata in FLASH with
|
|
the code sections. But because all data is referenced with the
|
|
PIC base register, all of that data must lie in RAM. A NXFLAT
|
|
change to work around this is under investigation3.
|
|
|
|
Newer GCC compilers (at least from 4.6.3), read-only data is
|
|
no long GOT-relative, but is now accessed PC-relative.
|
|
With PC relative addressing, read-only data must reside in the I-Space.
|
|
|
|
- **Globally Scoped Function Function Pointers**:
|
|
If a function pointer is taken to a statically defined function,
|
|
then (at least for ARM) GCC will generate a relocation that NXFLAT
|
|
cannot handle. The workaround is make all such functions global in
|
|
scope. A fix would involve a change to the GCC compiler as described
|
|
in Appendix B.
|
|
|
|
- **Special Handling of Callbacks**:
|
|
Callbacks through function pointers must be avoided or, when
|
|
then cannot be avoided, handled very specially. The reason
|
|
for this is that the PIC module requires setting of a special
|
|
value in a PIC register. If the callback does not set the PIC
|
|
register, then the called back function will fail because it
|
|
will be unable to correctly access data memory. Special logic
|
|
is in place to handle some NuttX callbacks: Signal callbacks
|
|
and watchdog timer callbacks. But other callbacks (like those
|
|
used with qsort() must be avoided in an NXFLAT module.
|
|
|
|
Supported Processors
|
|
--------------------
|
|
|
|
As mentioned `above <#limitations>`__, the NXFLAT toolchain is only
|
|
available for ARM and Cortex-M3 (thumb2) targets. Furthermore, NXFLAT
|
|
has only been tested on the Eagle-100 LMS6918 Cortex-M3 board.
|
|
|
|
Development Status
|
|
------------------
|
|
|
|
The initial release of NXFLAT was made in NuttX version 0.4.9. Testing
|
|
is limited to the tests found under ``apps/examples/nxflat`` in the
|
|
source tree. Some known problems exist (see the
|
|
`TODO <https://github.com/apache/nuttx/blob/master/TODO>`__ list). As
|
|
such, NXFLAT is currently in an early alpha phase.
|
|
|
|
NXFLAT Toolchain
|
|
================
|
|
|
|
Building the NXFLAT Toolchain
|
|
-----------------------------
|
|
|
|
In order to use NXFLAT, you must use special NXFLAT tools to create the
|
|
binary module in FLASH. To do this, you will need to download the
|
|
buildroot package and build it on your Linux or Cygwin machine. The
|
|
buildroot can be downloaded from
|
|
`Bitbucket.org <https://bitbucket.org/nuttx/buildroot/downloads>`__. You
|
|
will need version 0.1.7 or later.
|
|
|
|
Here are some general build instructions:
|
|
|
|
- You must have already configured NuttX in ``<some-dir>/nuttx``
|
|
- Download the buildroot package ``buildroot-0.x.y`` into
|
|
``<some-dir>``
|
|
- Unpack ``<some-dir>/buildroot-0.x.y.tar.gz`` using a command like ``tar zxf buildroot-0.x.y``.
|
|
This will result in a new directory like ``<some-dir>/buildroot-0.x.y``
|
|
- Move this into position:
|
|
``mv <some-dir>/buildroot-0.x.y``\ <some-dir>/buildroot
|
|
- ``cd``\ <some-dir>/buildroot
|
|
- Copy a configuration file into the top buildroot directory:
|
|
``cp boards/abc-defconfig-x.y.z .config``.
|
|
- Enable building of the NXFLAT tools by ``make menuconfig``. Select to
|
|
build the NXFLAT toolchain with GCC (you can also select omit
|
|
building GCC with and only build the NXFLAT toolchain for use with
|
|
your own GCC toolchain).
|
|
- Make the toolchain: ``make``. When the make completes, the tool
|
|
binaries will be available under
|
|
``<some-dir>/buildroot/build_abc/staging_dir/bin``
|
|
|
|
mknxflat
|
|
--------
|
|
|
|
``mknxflat`` is used to build a *thunk* file. See below
|
|
for usage::
|
|
|
|
Usage: mknxflat [options] <bfd-filename>
|
|
|
|
Where options are one or more of the following. Note
|
|
that a space is always required between the option and
|
|
any following arguments.
|
|
|
|
-d Use dynamic symbol table. [symtab]
|
|
-f <cmd-filename>
|
|
Take next commands from <cmd-filename> [cmd-line]
|
|
-o <out-filename>
|
|
Output to [stdout]
|
|
-v Verbose output [no output]
|
|
-w Import weakly declared functions, i.e., weakly
|
|
declared functions are expected to be provided at
|
|
load-time [not imported]
|
|
|
|
ldnxflat
|
|
--------
|
|
|
|
``ldnxflat`` is use to link your object files along with the *thunk*
|
|
file generated by ``mknxflat`` to produce the NXFLAT
|
|
binary module. See below for usage::
|
|
|
|
Usage: ldnxflat [options] <bfd-filename>
|
|
|
|
Where options are one or more of the following. Note
|
|
that a space is always required between the option and
|
|
any following arguments.
|
|
|
|
-d Use dynamic symbol table [Default: symtab]
|
|
-e <entry-point>
|
|
Entry point to module [Default: _start]
|
|
-o <out-filename>
|
|
Output to <out-filename> [Default: <bfd-filename>.nxf]
|
|
-s <stack-size>
|
|
Set stack size to <stack-size> [Default: 4096]
|
|
-v Verbose output. If -v is applied twice, additional
|
|
debug output is enabled [Default: no verbose output].
|
|
|
|
mksymtab
|
|
--------
|
|
|
|
There is a small helper program available in ``nuttx/tools`` call
|
|
``mksymtab``. ``mksymtab`` can be sued to generate symbol tables for the
|
|
NuttX base code that would be usable by the typical NXFLAT application.
|
|
``mksymtab`` builds symbol tables from common-separated value (CSV)
|
|
files. In particular, the CSV files:
|
|
|
|
#. ``nuttx/syscall/syscall.csv`` that describes the NuttX RTOS
|
|
interface, and
|
|
#. ``nuttx/libc/libc.csv`` that describes the NuttX C library interface.
|
|
#. ``nuttx/libc/math.cvs`` that descirbes any math library.
|
|
|
|
::
|
|
|
|
USAGE: ./mksymtab <cvs-file> <symtab-file>
|
|
|
|
Where:
|
|
|
|
<cvs-file> : The path to the input CSV file
|
|
<symtab-file>: The path to the output symbol table file
|
|
-d : Enable debug output
|
|
|
|
For example,
|
|
|
|
::
|
|
|
|
cd nuttx/tools
|
|
cat ../syscall/syscall.csv ../libc/libc.csv | sort >tmp.csv
|
|
./mksymtab.exe tmp.csv tmp.c
|
|
|
|
Making an NXFLAT module
|
|
-----------------------
|
|
|
|
Below is a snippet from an NXFLAT make file (simplified from NuttX
|
|
`Hello,
|
|
World! <https://github.com/apache/nuttx-apps/blob/master/examples/nxflat/tests/hello/Makefile>`__
|
|
example).
|
|
|
|
* Target 1:
|
|
|
|
.. code-block:: makefile
|
|
|
|
hello.r1: hello.o
|
|
abc-nuttx-elf-ld -r -d -warn-common -o $@ $^
|
|
|
|
* Target 2:
|
|
|
|
.. code-block:: makefile
|
|
|
|
hello-thunk.S: hello.r1
|
|
mknxflat -o $@ $^
|
|
|
|
* Target 3:
|
|
|
|
.. code-block:: makefile
|
|
|
|
hello.r2: hello-thunk.S
|
|
abc-nuttx-elf-ld -r -d -warn-common -T binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections -o $@ hello.o hello-thunk.o
|
|
|
|
* Target 4:
|
|
|
|
.. code-block:: makefile
|
|
|
|
hello: hello.r2
|
|
ldnxflat -e main -s 2048 -o $@ $^
|
|
|
|
**Target 1**. This target links all of the module's object files
|
|
together into one relocatable object. Two relocatable objects will be
|
|
generated; this is the first one (hence, the suffic ``.r1``). In this
|
|
"Hello, World!" case, there is only a single object file, ``hello.o``,
|
|
that is linked to produce the ``hello.r1`` object.
|
|
|
|
When the module's object files are compiled, some special compiler
|
|
CFLAGS must be provided. First, the option ``-fpic`` is required to tell
|
|
the compiler to generate position independent code (other GCC options,
|
|
like ``-fno-jump-tables`` might also be desirable). For ARM compilers,
|
|
two additional compilation options are required: ``-msingle-pic-base``
|
|
and ``-mpic-register=r10``.
|
|
|
|
**Target 2**. Given the ``hello.r1`` relocatable object, this target
|
|
will invoke ```mknxflat`` <#mknxflat>`__ to make the *thunk* file,
|
|
``hello-thunk.S``. This *thunk* file contains all of the information
|
|
needed to create the imported function list.
|
|
|
|
**Target 3** This target is similar to **Target 1**. In this case, it
|
|
will link together the module's object files (only ``hello.o`` here)
|
|
along with the assembled *thunk* file, ``hello-thunk.o`` to create the
|
|
second relocatable object, ``hello.r2``. The linker script,
|
|
``gnu-nxflat-gotoff.ld`` is required at this point to correctly position
|
|
the sections. This linker script produces two segments: An *I-Space*
|
|
(Instruction Space) segment containing mostly ``.text`` and a *D-Space*
|
|
(Data Space) segment containing ``.got``, ``.data``, and ``.bss``
|
|
sections. The I-Space section must be origined at address 0 (so that the
|
|
segment's addresses are really offsets into the I-Space segment) and the
|
|
D-Space section must also be origined at address 0 (so that segment's
|
|
addresses are really offsets into the I-Space segment). The option
|
|
``-no-check-sections`` is required to prevent the linker from failing
|
|
because these segments overlap.
|
|
|
|
**NOTE:** There are two linker scripts located at ``binfmt/libnxflat/``.
|
|
|
|
#. ``binfmt/libnxflat/gnu-nxflat-gotoff.ld``. Older versions of GCC
|
|
(at least up to GCC 4.3.3), use GOT-relative addressing to access RO
|
|
data. In that case, read-only data (.rodata) must reside in D-Space
|
|
and this linker script should be used.
|
|
#. ``binfmt/libnxflat/gnu-nxflat-pcrel.ld``. Newer versions of GCC
|
|
(at least as of GCC 4.6.3), use PC-relative addressing to access RO
|
|
data. In that case, read-only data (.rodata) must reside in I-Space
|
|
and this linker script should be used.
|
|
|
|
**Target 4**. Finally, this target will use the ``hello.r2`` relocatable
|
|
object to create the final, NXFLAT module ``hello`` by executing
|
|
``ldnxflat``.
|
|
|
|
**binfmt Registration** NXFLAT calls :c:func:`register_binfmt` to
|
|
incorporate itself into the system.
|
|
|
|
Appendix A: No GOT Operation
|
|
============================
|
|
|
|
When GCC generate position independent code, new code sections will
|
|
appear in your programs. One of these is the GOT (Global Offset Table)
|
|
and, in ELF environments, another is the PLT (Procedure Lookup Table.
|
|
For example, if your C code generated (ARM) assembly language like this
|
|
without PIC:
|
|
|
|
.. code-block:: asm
|
|
|
|
ldr r1, .L0 /* Fetch the offset to 'x' */
|
|
ldr r0, [r10, r1] /* Load the value of 'x' with PIC offset */
|
|
/* ... */
|
|
.L0: .word x /* Offset to 'x' */
|
|
|
|
Then when PIC is enabled (say with the -fpic compiler option), it will
|
|
generate code like this:
|
|
|
|
.. code-block:: asm
|
|
|
|
ldr r1, .L0 /* Fetch the offset to the GOT entry */
|
|
ldr r1, [r10, r1] /* Fetch the (relocated) address of 'x' from the GOT */
|
|
ldr r0, [r1, #0] /* Fetch the value of 'x' */
|
|
/* ... */
|
|
.L1 .word x(GOT) /* Offset to entry in the GOT */
|
|
|
|
See
|
|
`reference <http://xflat.sourceforge.net/NoMMUSharedLibs.html#shlibsgot>`__
|
|
|
|
Notice that the generates an extra level of indirection through the GOT.
|
|
This indirection is not needed by NXFLAT and only adds more RAM usage
|
|
and execution time.
|
|
|
|
NXFLAT (like `XFLAT <http://xflat.sourceforge.net/>`__) can work even
|
|
better without the GOT. Patches against older version of GCC exist to
|
|
eliminate the GOT indirections. Several are available
|
|
`here <http://xflat.cvs.sourceforge.net/viewvc/xflat/xflat/gcc/>`__ if
|
|
you are inspired to port them to a new GCC version.
|
|
|
|
Appendix B: PIC Text Workaround
|
|
===============================
|
|
|
|
There is a problem with the memory model in GCC that prevents it from
|
|
being used as you need to use it in the NXFLAT context. The problem is
|
|
that GCC PIC model assumes that the executable lies in a flat,
|
|
contiguous (virtual) address space like::
|
|
|
|
Virtual
|
|
.text
|
|
.got
|
|
.data
|
|
.bss
|
|
|
|
It assumes that the PIC base register (usually r10 for ARM) points to
|
|
the base of ``.text`` so that any address in ``.text``, ``.got``,
|
|
``.data``, ``.bss`` can be found with an offset from the same base
|
|
address. But that is not the memory arrangement that we need in the XIP
|
|
embedded environment. We need two memory regions, one in FLASH
|
|
containing shared code and on per task in RAM containing task-specific
|
|
data::
|
|
|
|
Flash RAM
|
|
.text .got
|
|
.data
|
|
.bss
|
|
|
|
The PIC base register needs to point to the base of the ``.got`` and
|
|
only addresses in the ``.got``, ``.data``, and ``.bss`` sections can be
|
|
accessed as an offset from the PIC base register. See also this `XFLAT
|
|
discussion <http://xflat.cvs.sourceforge.net/viewvc/*checkout*/xflat/xflat/gcc/README?revision=1.1.1.1>`__.
|
|
|
|
Patches against older version of GCC exist to correct this GCC behavior.
|
|
Several are available
|
|
`here <http://xflat.cvs.sourceforge.net/viewvc/xflat/xflat/gcc/>`__ if
|
|
you are inspired to port them to a new GCC version.
|
|
|