262 lines
11 KiB
C
262 lines
11 KiB
C
/****************************************************************************
|
|
* include/nuttx/sensors/lis3dsh.h
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
* this work for additional information regarding copyright ownership. The
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
* "License"); you may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
* License for the specific language governing permissions and limitations
|
|
* under the License.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __INCLUDE_NUTTX_SENSORS_LIS3DSH_H
|
|
#define __INCLUDE_NUTTX_SENSORS_LIS3DSH_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/irq.h>
|
|
#include <nuttx/config.h>
|
|
#include <nuttx/fs/ioctl.h>
|
|
#include <nuttx/spi/spi.h>
|
|
|
|
#if defined(CONFIG_SPI) && defined(CONFIG_LIS3DSH)
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* LIS3DSH Register Definitions *********************************************/
|
|
|
|
#define LIS3DSH_INFO_REG_1 (0x0D)
|
|
#define LIS3DSH_INFO_REG_2 (0x0E)
|
|
#define LIS3DSH_WHO_AM_I_REG (0x0F)
|
|
#define LIS3DSH_CTRL_REG_1 (0x21)
|
|
#define LIS3DSH_CTRL_REG_2 (0x22)
|
|
#define LIS3DSH_CTRL_REG_3 (0x23)
|
|
#define LIS3DSH_CTRL_REG_4 (0x20)
|
|
#define LIS3DSH_CTRL_REG_5 (0x24)
|
|
#define LIS3DSH_CTRL_REG_6 (0x25)
|
|
#define LIS3DSH_STATUS_REG (0x27)
|
|
#define LIS3DSH_OUT_T_REG (0x0C)
|
|
#define LIS3DSH_OFF_X_REG (0x10)
|
|
#define LIS3DSH_OFF_Y_REG (0x11)
|
|
#define LIS3DSH_OFF_Z_REG (0x12)
|
|
#define LIS3DSH_CS_X_REG (0x13)
|
|
#define LIS3DSH_CS_Y_REG (0x14)
|
|
#define LIS3DSH_CS_Z_REG (0x15)
|
|
#define LIS3DSH_LC_L_REG (0x16)
|
|
#define LIS3DSH_LC_H_REG (0x17)
|
|
#define LIS3DSH_STAT_REG (0x18)
|
|
#define LIS3DSH_PEAK1_REG (0x19)
|
|
#define LIS3DSH_PEAK2_REG (0x1A)
|
|
#define LIS3DSH_VFC_REG_1 (0x1B)
|
|
#define LIS3DSH_VFC_REG_2 (0x1C)
|
|
#define LIS3DSH_VFC_REG_3 (0x1D)
|
|
#define LIS3DSH_VFC_REG_4 (0x1E)
|
|
#define LIS3DSH_THRS3_REG (0x1F)
|
|
#define LIS3DSH_OUT_X_L_REG (0x28)
|
|
#define LIS3DSH_OUT_X_H_REG (0x29)
|
|
#define LIS3DSH_OUT_Y_L_REG (0x2A)
|
|
#define LIS3DSH_OUT_Y_H_REG (0x2B)
|
|
#define LIS3DSH_OUT_Z_L_REG (0x2C)
|
|
#define LIS3DSH_OUT_Z_H_REG (0x2D)
|
|
#define LIS3DSH_FIFO_CTRL_REG (0x2E)
|
|
#define LIS3DSH_FIFO_SRC_REG (0x2F)
|
|
#define LIS3DSH_FIFO_CTRL_REG (0x2E)
|
|
#define LIS3DSH_ST1_REG_1 (0x40)
|
|
#define LIS3DSH_ST1_REG_2 (0x41)
|
|
#define LIS3DSH_ST1_REG_3 (0x42)
|
|
#define LIS3DSH_ST1_REG_4 (0x43)
|
|
#define LIS3DSH_ST1_REG_5 (0x44)
|
|
#define LIS3DSH_ST1_REG_6 (0x45)
|
|
#define LIS3DSH_ST1_REG_7 (0x46)
|
|
#define LIS3DSH_ST1_REG_8 (0x47)
|
|
#define LIS3DSH_ST1_REG_9 (0x48)
|
|
#define LIS3DSH_ST1_REG_10 (0x49)
|
|
#define LIS3DSH_ST1_REG_11 (0x4A)
|
|
#define LIS3DSH_ST1_REG_12 (0x4B)
|
|
#define LIS3DSH_ST1_REG_13 (0x4C)
|
|
#define LIS3DSH_ST1_REG_14 (0x4D)
|
|
#define LIS3DSH_ST1_REG_15 (0x4E)
|
|
#define LIS3DSH_ST1_REG_16 (0x4F)
|
|
#define LIS3DSH_TIM4_1_REG (0x50)
|
|
#define LIS3DSH_TIM3_1_REG (0x51)
|
|
#define LIS3DSH_TIM2_1_REG_1 (0x52)
|
|
#define LIS3DSH_TIM2_1_REG_2 (0x53)
|
|
#define LIS3DSH_TIM1_1_REG_1 (0x54)
|
|
#define LIS3DSH_TIM1_1_REG_5 (0x55)
|
|
#define LIS3DSH_THRS2_1_REG (0x56)
|
|
#define LIS3DSH_THRS1_1_REG (0x57)
|
|
#define LIS3DSH_MASK1_B_REG (0x59)
|
|
#define LIS3DSH_MASK1_A_REG (0x5A)
|
|
#define LIS3DSH_SETT1_REG (0x5B)
|
|
#define LIS3DSH_PR1_REG (0x5C)
|
|
#define LIS3DSH_TC1_REG_1 (0x5D)
|
|
#define LIS3DSH_TC1_REG_2 (0x5E)
|
|
#define LIS3DSH_OUTS1_REG (0x5F)
|
|
#define LIS3DSH_ST2_REG_1 (0x60)
|
|
#define LIS3DSH_ST2_REG_2 (0x61)
|
|
#define LIS3DSH_ST2_REG_3 (0x62)
|
|
#define LIS3DSH_ST2_REG_4 (0x63)
|
|
#define LIS3DSH_ST2_REG_5 (0x64)
|
|
#define LIS3DSH_ST2_REG_6 (0x65)
|
|
#define LIS3DSH_ST2_REG_7 (0x66)
|
|
#define LIS3DSH_ST2_REG_8 (0x67)
|
|
#define LIS3DSH_ST2_REG_9 (0x68)
|
|
#define LIS3DSH_ST2_REG_10 (0x69)
|
|
#define LIS3DSH_ST2_REG_11 (0x6A)
|
|
#define LIS3DSH_ST2_REG_12 (0x6B)
|
|
#define LIS3DSH_ST2_REG_13 (0x6C)
|
|
#define LIS3DSH_ST2_REG_14 (0x6D)
|
|
#define LIS3DSH_ST2_REG_15 (0x6E)
|
|
#define LIS3DSH_ST2_REG_16 (0x6F)
|
|
#define LIS3DSH_TIM4_2_REG (0x70)
|
|
#define LIS3DSH_TIM3_2_REG (0x71)
|
|
#define LIS3DSH_TIM2_2_REG_1 (0x72)
|
|
#define LIS3DSH_TIM2_2_REG_2 (0x73)
|
|
#define LIS3DSH_TIM1_2_REG_1 (0x74)
|
|
#define LIS3DSH_TIM1_2_REG_5 (0x75)
|
|
#define LIS3DSH_THRS2_2_REG (0x76)
|
|
#define LIS3DSH_THRS1_2_REG (0x77)
|
|
#define LIS3DSH_DES2_REG (0x78)
|
|
#define LIS3DSH_MASK2_B_REG (0x79)
|
|
#define LIS3DSH_MASK2_A_REG (0x7A)
|
|
#define LIS3DSH_SETT2_REG (0x7B)
|
|
#define LIS3DSH_PR2_REG (0x7C)
|
|
#define LIS3DSH_TC2_REG_1 (0x7D)
|
|
#define LIS3DSH_TC2_REG_2 (0x7E)
|
|
|
|
/* LIS3DSH CTRL_REG_3 Definitions *******************************************/
|
|
|
|
#define LIS3DSH_CTRL_REG_3_DR_EN_BM (1<<7) /* DRDY signal enable to INT 1 */
|
|
#define LIS3DSH_CTRL_REG_3_IEA_BM (1<<6) /* Interrupt signal polarity */
|
|
#define LIS3DSH_CTRL_REG_3_IEL_BM (1<<5) /* Interrupt signal latching */
|
|
#define LIS3DSH_CTRL_REG_3_INT2_EN_BM (1<<4) /* Interrupt 2 enable / disable */
|
|
#define LIS3DSH_CTRL_REG_3_INT1_EN_BM (1<<3) /* Interrupt 1 enable / disable */
|
|
#define LIS3DSH_CTRL_REG_3_VFILT_BM (1<<2) /* Vector filter enable / disable */
|
|
#define LIS3DSH_CTRL_REG_3_STRT_BM (1<<0) /* Enable soft reset */
|
|
|
|
/* LIS3DSH CTRL_REG_4 Definitions *******************************************/
|
|
|
|
#define LIS3DSH_CTRL_REG_4_ODR_3_BM (1<<7) /* Output data rate and power mode selection bit 3 */
|
|
#define LIS3DSH_CTRL_REG_4_ODR_2_BM (1<<6) /* Output data rate and power mode selection bit 2 */
|
|
#define LIS3DSH_CTRL_REG_4_ODR_1_BM (1<<5) /* Output data rate and power mode selection bit 1 */
|
|
#define LIS3DSH_CTRL_REG_4_ODR_0_BM (1<<4) /* Output data rate and power mode selection bit 0 */
|
|
#define LIS3DSH_CTRL_REG_4_BDU_BM (1<<3) /* Enable block data update for accelerating data */
|
|
#define LIS3DSH_CTRL_REG_4_ZEN_BM (1<<2) /* Enable Z-axis */
|
|
#define LIS3DSH_CTRL_REG_4_YEN_BM (1<<1) /* Enable Y-axis */
|
|
#define LIS3DSH_CTRL_REG_4_XEN_BM (1<<0) /* Enable X-axis */
|
|
|
|
/* LIS3DSH CTRL_REG_5 Definitions *******************************************/
|
|
|
|
#define LIS3DSH_CTRL_REG_5_BW_2_BM (1<<7) /* Anti-aliasing filter bandwidth bit 2 */
|
|
#define LIS3DSH_CTRL_REG_5_BW_1_BM (1<<6) /* Anti-aliasing filter bandwidth bit 1 */
|
|
#define LIS3DSH_CTRL_REG_5_FSCALE_2_BM (1<<5) /* Full-scale selection bit 2 */
|
|
#define LIS3DSH_CTRL_REG_5_FSCALE_1_BM (1<<4) /* Full-scale selection bit 1 */
|
|
#define LIS3DSH_CTRL_REG_5_FSCALE_0_BM (1<<3) /* Full-scale selection bit 0 */
|
|
#define LIS3DSH_CTRL_REG_5_ST_2_BM (1<<2) /* Enable self-test bit 2 */
|
|
#define LIS3DSH_CTRL_REG_5_ST_1_BM (1<<1) /* Enable self-test bit 1 */
|
|
#define LIS3DSH_CTRL_REG_5_SIM_BM (1<<0) /* Enable SPI 4-wire interface */
|
|
|
|
/* LIS3DSH CTRL_REG_6 Definitions *******************************************/
|
|
|
|
#define LIS3DSH_CTRL_REG_6_BOOT_BM (1<<7) /* Force reboot, cleared as soon as the reboot is finished. Active high */
|
|
#define LIS3DSH_CTRL_REG_6_FIFO_EN_BM (1<<6) /* Enable FIFO */
|
|
#define LIS3DSH_CTRL_REG_6_WTM_EN_BM (1<<5) /* Enable FIFO watermark level use */
|
|
#define LIS3DSH_CTRL_REG_6_ADD_INC_BM (1<<4) /* Register address automatically incremented during a multiple byte access with a serial interface */
|
|
#define LIS3DSH_CTRL_REG_6_P1_EMPTY_BM (1<<3) /* Enable FIFO empty indication on Int1 */
|
|
#define LIS3DSH_CTRL_REG_6_P1_WTM_BM (1<<2) /* FIFO watermark interrupt Int1 */
|
|
#define LIS3DSH_CTRL_REG_6_P1_OVERRUN_BM (1<<1) /* FIFO overrun interrupt on Int1 */
|
|
#define LIS3DSH_CTRL_REG_6_P2_BOOT_BM (1<<0) /* BOOT interrupt on Int2 */
|
|
|
|
/* SPI BUS PARAMETERS *******************************************************/
|
|
|
|
#define LIS3DSH_SPI_FREQUENCY (5000000) /* 5 MHz */
|
|
#define LIS3DSH_SPI_MODE (SPIDEV_MODE3) /* Device uses SPI Mode 3: CPOL=1, CPHA=1 */
|
|
|
|
/****************************************************************************
|
|
* Public Types
|
|
****************************************************************************/
|
|
|
|
/* A reference to a structure of this type must be passed to the LIS3DSH
|
|
* driver. This structure provides information about the configuration
|
|
* of the sensor and provides some board-specific hooks.
|
|
*
|
|
* Memory for this structure is provided by the caller. It is not copied
|
|
* by the driver and is presumed to persist while the driver is active.
|
|
*/
|
|
|
|
struct lis3dsh_config_s
|
|
{
|
|
/* Since multiple sensors can be connected to the same SPI bus we need
|
|
* to use multiple spi device ids which are employed by NuttX to select/
|
|
* deselect the desired LIS3DSH chip via their chip select inputs.
|
|
*/
|
|
|
|
int spi_devid;
|
|
|
|
/* The IRQ number must be provided for each LIS3DSH device so that
|
|
* their interrupts can be distinguished.
|
|
*/
|
|
|
|
int irq;
|
|
|
|
/* Attach the LIS3DSH interrupt handler to the GPIO interrupt of the
|
|
* concrete LIS3DSH instance.
|
|
*/
|
|
|
|
int (*attach)(FAR struct lis3dsh_config_s *, xcpt_t);
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Public Function Prototypes
|
|
****************************************************************************/
|
|
|
|
#ifdef __cplusplus
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Name: lis3dsh_register
|
|
*
|
|
* Description:
|
|
* Register the LIS3DSH character device as 'devpath'
|
|
*
|
|
* Input Parameters:
|
|
* devpath - The full path to the driver to register. E.g., "/dev/acc0"
|
|
* spi - An instance of the SPI interface to use to communicate with
|
|
* LIS3DSH
|
|
* config - configuration for the LIS3DSH driver. For details see
|
|
* description above.
|
|
*
|
|
* Returned Value:
|
|
* Zero (OK) on success; a negated errno value on failure.
|
|
*
|
|
****************************************************************************/
|
|
|
|
int lis3dsh_register(FAR const char *devpath, FAR struct spi_dev_s *spi,
|
|
FAR struct lis3dsh_config_s *config);
|
|
|
|
#undef EXTERN
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_SPI && CONFIG_LIS3DSH */
|
|
#endif /* __INCLUDE_NUTTX_SENSORS_LIS3DSH_H */
|