OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/sched/mqueue/mq_receive.c

594 lines
20 KiB
C
Raw Permalink Blame History

/****************************************************************************
* sched/mqueue/mq_receive.c
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdbool.h>
#include <assert.h>
#include <errno.h>
#include <mqueue.h>
#include <debug.h>
#include <fcntl.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <nuttx/mqueue.h>
#include <nuttx/cancelpt.h>
#include "mqueue/mqueue.h"
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: nxmq_verify_receive
*
* Description:
* This is internal, common logic shared by both [nx]mq_receive and
* [nx]mq_timedreceive. This function verifies the input parameters that
* are common to both functions.
*
* Input Parameters:
* msgq - Message queue descriptor
* msg - Buffer to receive the message
* msglen - Size of the buffer in bytes
*
* Returned Value:
* On success, zero (OK) is returned. A negated errno value is returned
* on any failure:
*
* EBADF Message queue opened not opened for reading.
* EMSGSIZE 'msglen' was less than the maxmsgsize attribute of the message
* queue.
* EINVAL Invalid 'msg' or 'msgq'
*
****************************************************************************/
#ifdef CONFIG_DEBUG_FEATURES
static int nxmq_verify_receive(FAR struct file *mq,
FAR char *msg, size_t msglen)
{
FAR struct inode *inode = mq->f_inode;
FAR struct mqueue_inode_s *msgq;
if (inode == NULL)
{
return -EBADF;
}
msgq = inode->i_private;
/* Verify the input parameters */
if (!msg || !msgq)
{
return -EINVAL;
}
if ((mq->f_oflags & O_RDOK) == 0)
{
return -EBADF;
}
if (msglen < (size_t)msgq->maxmsgsize)
{
return -EMSGSIZE;
}
return OK;
}
#endif
/****************************************************************************
* Name: file_mq_timedreceive_internal
*
* Description:
* This is an internal function of file_mq_timedreceive()/
* file_mq_tickreceive(), please refer to the detailed description for
* more information.
*
* Input Parameters:
* mq - Message Queue Descriptor
* msg - Buffer to receive the message
* msglen - Size of the buffer in bytes
* prio - If not NULL, the location to store message priority.
* abstime - the absolute time to wait until a timeout is declared.
*
* Returned Value:
* On success, the length of the selected message in bytes is returned.
* On failure, -1 (ERROR) is returned and the errno is set appropriately:
*
* EAGAIN The queue was empty, and the O_NONBLOCK flag was set
* for the message queue description referred to by 'mqdes'.
* EPERM Message queue opened not opened for reading.
* EMSGSIZE 'msglen' was less than the maxmsgsize attribute of the
* message queue.
* EINTR The call was interrupted by a signal handler.
* EINVAL Invalid 'msg' or 'mqdes' or 'abstime'
* ETIMEDOUT The call timed out before a message could be transferred.
*
****************************************************************************/
static
ssize_t file_mq_timedreceive_internal(FAR struct file *mq, FAR char *msg,
size_t msglen, FAR unsigned int *prio,
FAR const struct timespec *abstime,
sclock_t ticks)
{
FAR struct mqueue_inode_s *msgq;
FAR struct mqueue_msg_s *mqmsg;
irqstate_t flags;
ssize_t ret = 0;
DEBUGASSERT(up_interrupt_context() == false);
/* Verify the input parameters */
if (abstime && (abstime->tv_nsec < 0 || abstime->tv_nsec >= 1000000000))
{
return -EINVAL;
}
if (mq == NULL)
{
return -EINVAL;
}
#ifdef CONFIG_DEBUG_FEATURES
/* Verify the input parameters and, in case of an error, set
* errno appropriately.
*/
ret = nxmq_verify_receive(mq, msg, msglen);
if (ret < 0)
{
return ret;
}
#endif
msgq = mq->f_inode->i_private;
/* Furthermore, nxmq_wait_receive() expects to have interrupts disabled
* because messages can be sent from interrupt level.
*/
flags = enter_critical_section();
/* Get the message from the message queue */
mqmsg = (FAR struct mqueue_msg_s *)list_remove_head(&msgq->msglist);
if (mqmsg == NULL)
{
if ((mq->f_oflags & O_NONBLOCK) != 0)
{
leave_critical_section(flags);
return -EAGAIN;
}
/* Wait & get the message from the message queue */
ret = nxmq_wait_receive(msgq, &mqmsg, abstime, ticks);
if (ret < 0)
{
leave_critical_section(flags);
return ret;
}
}
/* If we got message, then decrement the number of messages in
* the queue while we are still in the critical section
*/
if (msgq->nmsgs-- == msgq->maxmsgs)
{
nxmq_pollnotify(msgq, POLLOUT);
}
/* Notify all threads waiting for a message in the message queue */
nxmq_notify_receive(msgq);
leave_critical_section(flags);
/* Return the message to the caller */
if (prio)
{
*prio = mqmsg->priority;
}
memcpy(msg, mqmsg->mail, mqmsg->msglen);
ret = mqmsg->msglen;
/* Free the message structure */
nxmq_free_msg(mqmsg);
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: file_mq_timedreceive
*
* Description:
* This function receives the oldest of the highest priority messages from
* the message queue specified by "mq." If the message queue is empty
* and O_NONBLOCK was not set, file_mq_timedreceive() will block until a
* message is added to the message queue (or until a timeout occurs).
*
* file_mq_timedreceive() is an internal OS interface. It is functionally
* equivalent to mq_timedreceive() except that:
*
* - It is not a cancellation point, and
* - It does not modify the errno value.
*
* See comments with mq_timedreceive() for a more complete description of
* the behavior of this function
*
* Input Parameters:
* mq - Message Queue Descriptor
* msg - Buffer to receive the message
* msglen - Size of the buffer in bytes
* prio - If not NULL, the location to store message priority.
* abstime - the absolute time to wait until a timeout is declared.
*
* Returned Value:
* On success, the length of the selected message in bytes is returned.
* On failure, -1 (ERROR) is returned and the errno is set appropriately:
*
* EAGAIN The queue was empty, and the O_NONBLOCK flag was set
* for the message queue description referred to by 'mqdes'.
* EPERM Message queue opened not opened for reading.
* EMSGSIZE 'msglen' was less than the maxmsgsize attribute of the
* message queue.
* EINTR The call was interrupted by a signal handler.
* EINVAL Invalid 'msg' or 'mqdes' or 'abstime'
* ETIMEDOUT The call timed out before a message could be transferred.
*
****************************************************************************/
ssize_t file_mq_timedreceive(FAR struct file *mq, FAR char *msg,
size_t msglen, FAR unsigned int *prio,
FAR const struct timespec *abstime)
{
return file_mq_timedreceive_internal(mq, msg, msglen, prio, abstime, -1);
}
/****************************************************************************
* Name: file_mq_tickreceive
*
* Description:
* This function receives the oldest of the highest priority messages from
* the message queue specified by "mq." If the message queue is empty
* and O_NONBLOCK was not set, file_mq_tickreceive() will block until a
* message is added to the message queue (or until a timeout occurs).
*
* file_mq_tickreceive() is an internal OS interface. It is functionally
* equivalent to mq_timedreceive() except that:
*
* - It is not a cancellation point, and
* - It does not modify the errno value.
*
* See comments with mq_timedreceive() for a more complete description of
* the behavior of this function
*
* Input Parameters:
* mq - Message Queue Descriptor
* msg - Buffer to receive the message
* msglen - Size of the buffer in bytes
* prio - If not NULL, the location to store message priority.
* ticks - Ticks to wait from the start time until the semaphore is
* posted.
*
* Returned Value:
* This is an internal OS interface and should not be used by applications.
* It follows the NuttX internal error return policy: Zero (OK) is
* returned on success. A negated errno value is returned on failure.
* (see mq_timedreceive() for the list list valid return values).
*
****************************************************************************/
ssize_t file_mq_tickreceive(FAR struct file *mq, FAR char *msg,
size_t msglen, FAR unsigned int *prio,
sclock_t ticks)
{
return file_mq_timedreceive_internal(mq, msg, msglen, prio, NULL, ticks);
}
/****************************************************************************
* Name: nxmq_timedreceive
*
* Description:
* This function receives the oldest of the highest priority messages from
* the message queue specified by "mqdes." If the message queue is empty
* and O_NONBLOCK was not set, nxmq_timedreceive() will block until a
* message is added to the message queue (or until a timeout occurs).
*
* nxmq_timedreceive() is an internal OS interface. It is functionally
* equivalent to mq_timedreceive() except that:
*
* - It is not a cancellation point, and
* - It does not modify the errno value.
*
* See comments with mq_timedreceive() for a more complete description of
* the behavior of this function
*
* Input Parameters:
* mqdes - Message Queue Descriptor
* msg - Buffer to receive the message
* msglen - Size of the buffer in bytes
* prio - If not NULL, the location to store message priority.
* abstime - the absolute time to wait until a timeout is declared.
*
* Returned Value:
* On success, the length of the selected message in bytes is returned.
* On failure, -1 (ERROR) is returned and the errno is set appropriately:
*
* EAGAIN The queue was empty, and the O_NONBLOCK flag was set
* for the message queue description referred to by 'mqdes'.
* EPERM Message queue opened not opened for reading.
* EMSGSIZE 'msglen' was less than the maxmsgsize attribute of the
* message queue.
* EINTR The call was interrupted by a signal handler.
* EINVAL Invalid 'msg' or 'mqdes' or 'abstime'
* ETIMEDOUT The call timed out before a message could be transferred.
*
****************************************************************************/
ssize_t nxmq_timedreceive(mqd_t mqdes, FAR char *msg, size_t msglen,
FAR unsigned int *prio,
FAR const struct timespec *abstime)
{
FAR struct file *filep;
ssize_t ret;
ret = fs_getfilep(mqdes, &filep);
if (ret < 0)
{
return ret;
}
ret = file_mq_timedreceive_internal(filep, msg, msglen, prio, abstime, -1);
fs_putfilep(filep);
return ret;
}
/****************************************************************************
* Name: mq_timedreceive
*
* Description:
* This function receives the oldest of the highest priority messages from
* the message queue specified by "mqdes." If the size of the buffer in
* bytes (msglen) is less than the "mq_msgsize" attribute of the message
* queue, mq_timedreceive will return an error. Otherwise, the selected
* message is removed from the queue and copied to "msg."
*
* If the message queue is empty and O_NONBLOCK was not set,
* mq_timedreceive() will block until a message is added to the message
* queue (or until a timeout occurs). If more than one task is waiting
* to receive a message, only the task with the highest priority that has
* waited the longest will be unblocked.
*
* mq_timedreceive() behaves just like mq_receive(), except that if the
* queue is empty and the O_NONBLOCK flag is not enabled for the message
* queue description, then abstime points to a structure which specifies a
* ceiling on the time for which the call will block. This ceiling is an
* absolute timeout in seconds and nanoseconds since the Epoch (midnight
* on the morning of 1 January 1970).
*
* If no message is available, and the timeout has already expired by the
* time of the call, mq_timedreceive() returns immediately.
*
* Input Parameters:
* mqdes - Message Queue Descriptor
* msg - Buffer to receive the message
* msglen - Size of the buffer in bytes
* prio - If not NULL, the location to store message priority.
* abstime - the absolute time to wait until a timeout is declared.
*
* Returned Value:
* On success, the length of the selected message in bytes is returned.
* On failure, -1 (ERROR) is returned and the errno is set appropriately:
*
* EAGAIN The queue was empty, and the O_NONBLOCK flag was set
* for the message queue description referred to by 'mqdes'.
* EPERM Message queue opened not opened for reading.
* EMSGSIZE 'msglen' was less than the maxmsgsize attribute of the
* message queue.
* EINTR The call was interrupted by a signal handler.
* EINVAL Invalid 'msg' or 'mqdes' or 'abstime'
* ETIMEDOUT The call timed out before a message could be transferred.
*
****************************************************************************/
ssize_t mq_timedreceive(mqd_t mqdes, FAR char *msg, size_t msglen,
FAR unsigned int *prio,
FAR const struct timespec *abstime)
{
int ret;
/* mq_timedreceive() is a cancellation point */
enter_cancellation_point();
/* Let nxmq_timedreceive do all of the work */
ret = nxmq_timedreceive(mqdes, msg, msglen, prio, abstime);
if (ret < 0)
{
set_errno(-ret);
ret = ERROR;
}
leave_cancellation_point();
return ret;
}
/****************************************************************************
* Name: file_mq_receive
*
* Description:
* This function receives the oldest of the highest priority messages
* from the message queue specified by "mq." This is an internal OS
* interface. It is functionally equivalent to mq_receive except that:
*
* - It is not a cancellation point, and
* - It does not modify the errno value.
*
* See comments with mq_receive() for a more complete description of the
* behavior of this function
*
* Input Parameters:
* mq - Message Queue Descriptor
* msg - Buffer to receive the message
* msglen - Size of the buffer in bytes
* prio - If not NULL, the location to store message priority.
*
* Returned Value:
* This is an internal OS interface and should not be used by applications.
* It follows the NuttX internal error return policy: Zero (OK) is
* returned on success. A negated errno value is returned on failure.
* (see mq_receive() for the list list valid return values).
*
****************************************************************************/
ssize_t file_mq_receive(FAR struct file *mq, FAR char *msg, size_t msglen,
FAR unsigned int *prio)
{
return file_mq_timedreceive_internal(mq, msg, msglen, prio, NULL, -1);
}
/****************************************************************************
* Name: nxmq_receive
*
* Description:
* This function receives the oldest of the highest priority messages
* from the message queue specified by "mqdes." This is an internal OS
* interface. It is functionally equivalent to mq_receive except that:
*
* - It is not a cancellation point, and
* - It does not modify the errno value.
*
* See comments with mq_receive() for a more complete description of the
* behavior of this function
*
* Input Parameters:
* mqdes - Message Queue Descriptor
* msg - Buffer to receive the message
* msglen - Size of the buffer in bytes
* prio - If not NULL, the location to store message priority.
*
* Returned Value:
* This is an internal OS interface and should not be used by applications.
* It follows the NuttX internal error return policy: Zero (OK) is
* returned on success. A negated errno value is returned on failure.
* (see mq_receive() for the list list valid return values).
*
****************************************************************************/
ssize_t nxmq_receive(mqd_t mqdes, FAR char *msg, size_t msglen,
FAR unsigned int *prio)
{
FAR struct file *filep;
ssize_t ret;
ret = fs_getfilep(mqdes, &filep);
if (ret < 0)
{
return ret;
}
ret = file_mq_receive(filep, msg, msglen, prio);
fs_putfilep(filep);
return ret;
}
/****************************************************************************
* Name: mq_receive
*
* Description:
* This function receives the oldest of the highest priority messages
* from the message queue specified by "mqdes." If the size of the
* buffer in bytes (msglen) is less than the "mq_msgsize" attribute of
* the message queue, mq_receive will return an error. Otherwise, the
* selected message is removed from the queue and copied to "msg."
*
* If the message queue is empty and O_NONBLOCK was not set,
* mq_receive() will block until a message is added to the message
* queue. If more than one task is waiting to receive a message, only
* the task with the highest priority that has waited the longest will
* be unblocked.
*
* If the queue is empty and O_NONBLOCK is set, ERROR will be returned.
*
* Input Parameters:
* mqdes - Message Queue Descriptor
* msg - Buffer to receive the message
* msglen - Size of the buffer in bytes
* prio - If not NULL, the location to store message priority.
*
* Returned Value:
* On success, the length of the selected message in bytes is returned.
* On failure, -1 (ERROR) is returned and the errno is set appropriately:
*
* EAGAIN The queue was empty, and the O_NONBLOCK flag was set
* for the message queue description referred to by 'mqdes'.
* EBADF Message queue opened not opened for reading.
* EMSGSIZE 'msglen' was less than the maxmsgsize attribute of the
* message queue.
* EINTR The call was interrupted by a signal handler.
* EINVAL Invalid 'msg' or 'mqdes'
*
****************************************************************************/
ssize_t mq_receive(mqd_t mqdes, FAR char *msg, size_t msglen,
FAR unsigned int *prio)
{
int ret;
/* mq_receive() is a cancellation point */
enter_cancellation_point();
/* Let nxmq_receive do all of the work */
ret = nxmq_receive(mqdes, msg, msglen, prio);
if (ret < 0)
{
set_errno(-ret);
ret = ERROR;
}
leave_cancellation_point();
return ret;
}
Reference in New Issue View Git Blame Copy Permalink