OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/drivers/i2c/pca9540bdp.c

302 lines
8.5 KiB
C
Raw Permalink Blame History

/****************************************************************************
* drivers/i2c/pca9540bdp.c
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdlib.h>
#include <fixedmath.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/kmalloc.h>
#include <nuttx/fs/fs.h>
#include <nuttx/i2c/i2c_master.h>
#include "pca9540bdp.h"
#include <nuttx/i2c/pca9540bdp.h>
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* I2C Helpers */
static int pca9540bdp_write_config(FAR struct pca9540bdp_dev_s *priv,
FAR uint8_t regvalue);
static int pca9540bdp_read_config(FAR struct pca9540bdp_dev_s *priv,
FAR uint8_t *regvalue);
/* Other helpers */
static int pca9540bdp_select_port(FAR struct pca9540bdp_dev_s *priv,
uint8_t val);
/* I2C multiplexer vtable */
static int pca9540bdp_transfer_on_port (FAR struct i2c_master_s *dev,
FAR struct i2c_msg_s *msgs, int count);
#ifdef CONFIG_I2C_RESET
static int pca9540bdp_reset_on_port (FAR struct i2c_master_s *dev);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
static const struct i2c_ops_s g_i2cmux_ops =
{
pca9540bdp_transfer_on_port
#ifdef CONFIG_I2C_RESET
, pca9540bdp_reset_on_port
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
static int pca9540bdp_write_config(FAR struct pca9540bdp_dev_s *priv,
FAR uint8_t regvalue)
{
struct i2c_config_s iconf;
int ret;
iconf.frequency = CONFIG_PCA9549BDP_I2C_FREQUENCY;
iconf.address = priv->addr;
iconf.addrlen = 7;
ret = i2c_write(priv->i2c, &iconf, &regvalue, 1);
i2cinfo("Write to address 0x%02X; register value: 0x%02x ret: %d\n",
priv->addr, regvalue, ret);
return ret;
}
static int pca9540bdp_read_config(FAR struct pca9540bdp_dev_s *priv,
FAR uint8_t *regvalue)
{
struct i2c_config_s iconf;
int ret;
iconf.frequency = CONFIG_PCA9549BDP_I2C_FREQUENCY;
iconf.address = priv->addr;
iconf.addrlen = 7;
ret = i2c_read(priv->i2c, &iconf, regvalue, 1);
i2cinfo("Read from address: 0x%02X; register value: 0x%02x ret: %d\n",
priv->addr, *regvalue, ret);
return ret;
}
static int pca9540bdp_select_port(FAR struct pca9540bdp_dev_s *priv,
uint8_t val)
{
if (val != PCA9540BDP_SEL_PORT0 && val != PCA9540BDP_SEL_PORT1)
{
/* port not supported */
return -EINVAL;
}
if ((PCA9540BDP_ENABLE | val) == priv->state)
{
/* port already selected */
return OK;
}
/* Modify state and write it to the mux. Selecting a port always enables
* the device
*/
priv->state = PCA9540BDP_ENABLE | val;
return (pca9540bdp_write_config(priv, priv->state) == 0) ? OK : -ECOMM;
}
static int pca9540bdp_transfer_on_port(FAR struct i2c_master_s *dev,
FAR struct i2c_msg_s *msgs, int count)
{
FAR struct i2c_port_dev_s *port_dev = (FAR struct i2c_port_dev_s *)dev;
FAR struct pca9540bdp_dev_s *priv = port_dev->dev;
int ret;
/* select the mux port */
if (pca9540bdp_select_port(priv, port_dev->port) != OK)
{
i2cerr("Could not select proper mux port\n");
return -ECOMM; /* Signal error condition */
}
/* Resume the i2c transfer to the device connected to the mux port */
ret = I2C_TRANSFER(priv->i2c, msgs, count);
i2cinfo("Selected port %d and resumed transfer. Result: %d\n",
port_dev->port, ret);
return ret;
}
#ifdef CONFIG_I2C_RESET
static int pca9540bdp_reset_on_port (FAR struct i2c_master_s *dev)
{
FAR struct i2c_port_dev_s *port_dev = (struct i2c_port_dev_s *)dev;
FAR struct pca9540bdp_dev_s *priv = port_dev->dev;
int port = port_dev->port;
int ret;
/* select the mux port */
if (pca9540bdp_select_port(priv, port) != OK)
{
i2cerr("Could not select proper mux port\n");
return -ECOMM; /* signal error condition */
}
/* resume the i2c reset for the device connected to the mux port */
ret = I2C_RESET(priv->i2c);
return ret;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: pca9540bdp_lower_half
*
* Description:
* Initialize the lower half of the PCA9540BDP by creating a i2c_master_s
* for the virtual i2c master and link it to the associated PCA9540BDP and
* its port.
*
* Input Parameters:
* dev - Pointer to the associated PCA9540BDP
* port - The port number as defined in pca9540bdp.h
*
* Returned Value:
* Common i2c multiplexer device instance; NULL on failure.
*
****************************************************************************/
FAR struct i2c_master_s *
pca9540bdp_lower_half(FAR struct pca9540bdp_dev_s *dev, uint8_t port)
{
FAR struct i2c_port_dev_s *port_dev;
/* Sanity check */
DEBUGASSERT(dev != NULL);
/* Initialize the i2c_port_dev_s device structure */
port_dev = (FAR struct i2c_port_dev_s *)
kmm_malloc(sizeof(struct i2c_port_dev_s));
if (port_dev == NULL)
{
i2cerr("ERROR: Failed to allocate i2c port lower half instance\n");
return NULL;
}
/* set vi2c ops to their implementations */
port_dev->vi2c.ops = &g_i2cmux_ops;
/* save state variables */
port_dev->dev = dev;
port_dev->port = port;
return &port_dev->vi2c;
}
/****************************************************************************
* Name: pca9540bdp_initialize
*
* Description:
* Initialize the PCA9540BDP device.
*
* Input Parameters:
* i2c - An instance of the I2C interface to use to communicate with
* PCA9540BDP
* addr - The I2C address of the PCA9540BDP. The base I2C address of the
* PCA9540BDP is 0x70.
*
* Returned Value:
* Common i2c multiplexer device instance; NULL on failure.
*
****************************************************************************/
FAR struct pca9540bdp_dev_s *
pca9540bdp_initialize(FAR struct i2c_master_s *i2c, uint8_t addr)
{
FAR struct pca9540bdp_dev_s *priv;
/* Sanity check */
DEBUGASSERT(i2c != NULL);
/* Initialize the PCA9549BDP device structure */
priv = (FAR struct pca9540bdp_dev_s *)
kmm_malloc(sizeof(struct pca9540bdp_dev_s));
if (priv == NULL)
{
i2cerr("ERROR: Failed to allocate instance\n");
return NULL;
}
priv->i2c = i2c;
priv->addr = addr;
priv->state = 0x00;
if (pca9540bdp_read_config(priv, &priv->state) != OK)
{
i2cerr("Could not read initial state from the device\n");
kmm_free(priv);
return NULL; /* signal error condition */
}
i2cinfo("Initial device state: %d\n", priv->state);
if (pca9540bdp_select_port(priv, PCA9540BDP_SEL_PORT0) != OK)
{
i2cerr("Could not select mux port 0\n");
kmm_free(priv);
return NULL; /* signal error condition */
}
i2cinfo("PCA9549BDP (addr=0x%02x) set up with port %d\n", priv->addr,
PCA9540BDP_SEL_PORT0);
return priv;
}
Reference in New Issue View Git Blame Copy Permalink