/******************************************************************************************** * drivers/ioexpander/tca64.h * * Copyright (C) 2016 Gregory Nutt. All rights reserved. * Author: Sebastien Lorquet * * References: * "16-bit I2C-bus and SMBus I/O port with interrupt product datasheet", * Rev. 08 - 22 October 2009, NXP * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ********************************************************************************************/ #ifndef __DRIVERS_IOEXPANDER_TCA64XX_H #define __DRIVERS_IOEXPANDER_TCA64XX_H /******************************************************************************************** * Included Files ********************************************************************************************/ #include #include #include #include #include #include #include #include #include #if defined(CONFIG_IOEXPANDER) && defined(CONFIG_IOEXPANDER_TCA64XX) /******************************************************************************************** * Pre-processor Definitions ********************************************************************************************/ /* Configuration ****************************************************************************/ /* Prerequisites: * CONFIG_I2C * I2C support is required * CONFIG_IOEXPANDER * Enables I/O expander support * * CONFIG_IOEXPANDER_TCA64XX * Enables support for the TCA64XX driver (Needs CONFIG_INPUT) * CONFIG_TCA64XX_MULTIPLE * Can be defined to support multiple TCA64XX devices on board. * CONFIG_TCA64XX_INT_NCALLBACKS * Maximum number of supported pin interrupt callbacks. * CONFIG_TCA64XX_INT_POLL * Enables a poll for missed interrupts * CONFIG_TCA64XX_INT_POLLDELAY * If CONFIG_TCA64XX_INT_POLL=y, then this is the delay in microseconds * between polls for missed interrupts. */ #ifndef CONFIG_I2C # error "CONFIG_I2C is required by TCA64XX" #endif #ifdef CONFIG_IOEXPANDER_INT_ENABLE # ifndef CONFIG_TCA64XX_INT_NCALLBACKS # define CONFIG_TCA64XX_INT_NCALLBACKS 4 # endif #endif #ifdef CONFIG_IOEXPANDER_INT_ENABLE # ifndef CONFIG_SCHED_WORKQUEUE # error Work queue support required. CONFIG_SCHED_WORKQUEUE must be selected. # endif #endif #ifndef CONFIG_TCA64XX_INT_POLLDELAY # define CONFIG_TCA64XX_INT_POLLDELAY 500000 #endif /* TCA64XX Definitions **********************************************************************/ /* I2C frequency */ #define TCA64XX_I2C_MAXFREQUENCY 400000 /* 400KHz */ /* TCA64XX Parts ****************************************************************************/ #define TCA6408_INPUT_REG 0x00 #define TCA6408_OUTPUT_REG 0x01 #define TCA6408_POLARITY_REG 0x02 #define TCA6408_CONFIG_REG 0x03 #define TCA6408_NR_GPIOS 8 #define TCA6416_INPUT0_REG 0x00 #define TCA6416_INPUT1_REG 0x01 #define TCA6416_OUTPUT0_REG 0x02 #define TCA6416_OUTPUT1_REG 0x03 #define TCA6416_POLARITY0_REG 0x04 #define TCA6416_POLARITY1_REG 0x05 #define TCA6416_CONFIG0_REG 0x06 #define TCA6416_CONFIG1_REG 0x07 #define TCA6416_NR_GPIOS 16 #define TCA6424_INPUT0_REG 0x00 #define TCA6424_INPUT1_REG 0x01 #define TCA6424_INPUT2_REG 0x02 #define TCA6424_OUTPUT0_REG 0x04 #define TCA6424_OUTPUT1_REG 0x05 #define TCA6424_OUTPUT2_REG 0x06 #define TCA6424_POLARITY0_REG 0x08 #define TCA6424_POLARITY1_REG 0x09 #define TCA6424_POLARITY2_REG 0x0A #define TCA6424_CONFIG0_REG 0x0C #define TCA6424_CONFIG1_REG 0x0D #define TCA6424_CONFIG2_REG 0x0E #define TCA6424_NR_GPIOS 24 #define TCA64XX_NR_GPIO_MAX TCA6424_NR_GPIOS /* 1us (datasheet: reset pulse duration (Tw) is 4ns */ #define TCA64XX_TW 1 /* 1us (datasheet: time to reset (Treset) is 600ns */ #define TCA64XX_TRESET 1 #define TCA64XX_IRQ_TYPE_EDGE_BOTH 0x00000000 #define TCA64XX_IRQ_TYPE_EDGE_RISING 0x00000001 #define TCA64XX_IRQ_TYPE_EDGE_FALLING 0x00000002 #define TCA64XX_IRQ_TYPE_LEVEL_HIGH 0x00000001 #define TCA64XX_IRQ_TYPE_LEVEL_LOW 0x00000002 #define TCA64XX_IRQ_TYPE_EDGE 0x00000000 #define TCA64XX_IRQ_TYPE_LEVEL 0x00000001 #define TCA64XX_POLLDELAY (CONFIG_TCA64XX_INT_POLLDELAY / USEC_PER_TICK) #define TCA64_LEVEL_SENSITIVE(d,p) \ (((d)->trigger & ((ioe_pinset_t)1 << (p))) == 0) #define TCA64_LEVEL_HIGH(d,p) \ (((d)->level[0] & ((ioe_pinset_t)1 << (p))) != 0) #define TCA64_LEVEL_LOW(d,p) \ (((d)->level[1] & ((ioe_pinset_t)1 << (p))) != 0) #define TCA64_EDGE_SENSITIVE(d,p) \ (((d)->trigger & ((ioe_pinset_t)1 << (p))) != 0) #define TCA64_EDGE_RISING(d,p) \ (((d)->level[0] & ((ioe_pinset_t)1 << (p))) != 0) #define TCA64_EDGE_FALLING(d,p) \ (((d)->level[1] & ((ioe_pinset_t)1 << (p))) != 0) #define TCA64_EDGE_BOTH(d,p) \ (TCA64_LEVEL_RISING(d,p) && TCA64_LEVEL_FALLING(d,p)) /******************************************************************************************** * Public Types ********************************************************************************************/ /* This structure represents the configuration of one part */ struct tca64_part_s { uint8_t tp_id; /* Part ID (see enum tca64xx_part_e) */ uint8_t tp_ngpios; /* Number of supported GPIOs */ uint8_t tp_input; /* Address of first input register */ uint8_t tp_output; /* Address of first output register */ uint8_t tp_polarity; /* Address of first polarity register */ uint8_t tp_config; /* Address of first configuration register */ }; #ifdef CONFIG_IOEXPANDER_INT_ENABLE /* This type represents on registered pin interrupt callback */ struct tca64_callback_s { ioe_pinset_t pinset; /* Set of pin interrupts that will generate * the callback. */ ioe_callback_t cbfunc; /* The saved callback function pointer */ FAR void *cbarg; /* Callback argument */ }; #endif /* This structure represents the state of the TCA64XX driver */ struct tca64_dev_s { struct ioexpander_dev_s dev; /* Nested structure to allow casting as public gpio * expander. */ FAR struct tca64_config_s *config; /* Board configuration data */ FAR struct i2c_master_s *i2c; /* Saved I2C driver instance */ uint8_t part; /* TCA64xx part ID (see enum tca64xx_part_e) */ sem_t exclsem; /* Mutual exclusion */ #ifdef CONFIG_IOEXPANDER_INT_ENABLE #ifdef CONFIG_TCA64XX_INT_POLL WDOG_ID wdog; /* Timer used to poll for missed interrupts */ #endif ioe_pinset_t input; /* Last input registers */ ioe_pinset_t intstat; /* Pending interrupts */ ioe_pinset_t trigger; /* Bit encoded: 0=level 1=edge */ ioe_pinset_t level[2]; /* Bit encoded: 01=high/rising, 10 low/falling, 11 both */ struct work_s work; /* Supports the interrupt handling "bottom half" */ /* Saved callback information for each I/O expander client */ struct tca64_callback_s cb[CONFIG_TCA64XX_INT_NCALLBACKS]; #endif }; #endif /* CONFIG_IOEXPANDER && CONFIG_IOEXPANDER_TCA64XX */ #endif /* __DRIVERS_IOEXPANDER_TCA64XX_H */