/****************************************************************************
 * include/nuttx/can/mcp2515.h
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

#ifndef __INCLUDE_NUTTX_CAN_MCP2515_H
#define __INCLUDE_NUTTX_CAN_MCP2515_H

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/irq.h>
#include <nuttx/config.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/spi/spi.h>
#include <nuttx/can/can.h>

#if defined(CONFIG_CAN) && defined(CONFIG_CAN_MCP2515)

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* SPI BUS PARAMETERS *******************************************************/

#define MCP2515_SPI_MODE         (SPIDEV_MODE0)   /* Device uses SPI Mode 0: CPOL=0, CPHA=0 */

/****************************************************************************
 * Public Types
 ****************************************************************************/

/* Type of the MCP2515 interrupt handling callback */

struct mcp2515_config_s; /* Forward reference */
typedef CODE void (*mcp2515_handler_t)(FAR struct mcp2515_config_s *config,
                                       FAR void *arg);

/* A reference to a structure of this type must be passed to the MCP2515
 * driver when the driver is instantiated. This structure provides
 * information about the configuration of the MCP2515 and provides some
 * board-specific hooks.
 *
 * Memory for this structure is provided by the caller.  It is not copied by
 * the driver and is presumed to persist while the driver is active. The
 * memory must be writeable because, under certain circumstances, the driver
 * may modify the frequency.
 */

struct mcp2515_config_s
{
  struct spi_dev_s *spi;    /* SPI used for MCP2515 communication */
  uint32_t baud;            /* Configured baud */
  uint32_t btp;             /* Bit timing/prescaler register setting */
  uint8_t devid;            /* MCP2515 device ID */
  uint8_t mode;             /* See enum mcp2515_canmod_e */
  uint8_t nfilters;         /* Number of standard/extended filters */
#ifdef MCP2515_LOOPBACK
  bool loopback;            /* True: Loopback mode */
#endif

  /* Device characterization */

  /* IRQ/GPIO access callbacks.  These operations all hidden behind
   * callbacks to isolate the ADXL345 driver from differences in GPIO
   * interrupt handling by varying boards and MCUs.
   *
   * attach  - Attach the ADXL345 interrupt handler to the GPIO interrupt
   */

  CODE int (*attach)(FAR struct mcp2515_config_s *state,
                     mcp2515_handler_t handler, FAR void *arg);
};

/* Internal representation of the MCP2515 state data */

struct mcp2515_can_s;

/****************************************************************************
 * Public Function Prototypes
 ****************************************************************************/

#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif

/****************************************************************************
 * Name: mcp2515_instantiate
 *
 * Description:
 *   Initialize a CAN Driver for MCP2515.
 *
 * Input Parameters:
 *   spi     - An instance of the SPI interface to use to communicate with
 *             MCP2515
 *   config  - Describes the configuration of the MCP2515 part.
 *
 * Returned Value:
 *   Zero (OK) on success; a negated errno value on failure.
 *
 ****************************************************************************/

FAR struct mcp2515_can_s *mcp2515_instantiate(
                                        FAR struct mcp2515_config_s *config);

/****************************************************************************
 * Name: mcp2515_initialize
 *
 * Description:
 *   Initialize a CAN Driver for MCP2515.
 *
 * Input Parameters:
 *   spi     - An instance of the SPI interface to use to communicate with
 *             MCP2515
 *   config  - Describes the configuration of the MCP2515 part.
 *
 * Returned Value:
 *   Zero (OK) on success; a negated errno value on failure.
 *
 ****************************************************************************/

FAR struct can_dev_s *mcp2515_initialize(
                                      FAR struct mcp2515_can_s *mcp2515can);

#undef EXTERN
#ifdef __cplusplus
}
#endif

#endif /* CONFIG_CAN && CONFIG_CAN_MCP2515 */

#endif /* __INCLUDE_NUTTX_CAN_MCP2515_H */