/**************************************************************************** * drivers/ajoystick.c * * Copyright (C) 2014 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /* This file provides a driver for a standard analog joystick device. An * analog joystick refers to a joystick that provides X/Y positional data as * integer values such as might be provides by Analog-to-Digital Conversion * (ADC). The analog positional data may also be accompanied by discrete * button data. * * The analog joystick driver exports a standard character driver * interface. By convention, the analog joystick is registered as an input * device at /dev/ajoyN where N uniquely identifies the driver instance. */ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include /**************************************************************************** * Private Types ****************************************************************************/ /* This structure provides the state of one discrete joystick driver */ struct ajoy_upperhalf_s { /* Saved binding to the lower half discrete joystick driver */ FAR const struct ajoy_lowerhalf_s *au_lower; ajoy_buttonset_t au_enabled; /* Set of currently enabled button interrupts */ ajoy_buttonset_t au_sample; /* Last sampled button states */ sem_t au_exclsem; /* Supports exclusive access to the device */ /* The following is a singly linked list of open references to the * joystick device. */ FAR struct ajoy_open_s *au_open; }; /* This structure describes the state of one open joystick driver instance */ struct ajoy_open_s { /* Supports a singly linked list */ FAR struct ajoy_open_s *ao_flink; /* The following will be true if we are closing */ volatile bool ao_closing; #ifndef CONFIG_DISABLE_SIGNALS /* Joystick event notification information */ pid_t ao_pid; struct ajoy_notify_s ao_notify; #endif #ifndef CONFIG_DISABLE_POLL /* Poll event information */ struct ajoy_pollevents_s ao_pollevents; /* The following is a list if poll structures of threads waiting for * driver events. */ FAR struct pollfd *ao_fds[CONFIG_AJOYSTICK_NPOLLWAITERS]; #endif }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* Semaphore helpers */ static inline int ajoy_takesem(sem_t *sem); #define ajoy_givesem(s) sem_post(s); /* Sampling and Interrupt handling */ #if !defined(CONFIG_DISABLE_POLL) || !defined(CONFIG_DISABLE_SIGNALS) static void ajoy_enable(FAR struct ajoy_upperhalf_s *priv); static void ajoy_interrupt(FAR const struct ajoy_lowerhalf_s *lower, FAR void *arg); #endif /* Sampling */ static void ajoy_sample(FAR struct ajoy_upperhalf_s *priv); /* Character driver methods */ static int ajoy_open(FAR struct file *filep); static int ajoy_close(FAR struct file *filep); static ssize_t ajoy_read(FAR struct file *filep, FAR char *buffer, size_t buflen); static int ajoy_ioctl(FAR struct file *filep, int cmd, unsigned long arg); #ifndef CONFIG_DISABLE_POLL static int ajoy_poll(FAR struct file *filep, FAR struct pollfd *fds, bool setup); #endif /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations ajoy_fops = { ajoy_open, /* open */ ajoy_close, /* close */ ajoy_read, /* read */ 0, /* write */ 0, /* seek */ ajoy_ioctl /* ioctl */ #ifndef CONFIG_DISABLE_POLL , ajoy_poll /* poll */ #endif }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: ajoy_takesem ****************************************************************************/ static inline int ajoy_takesem(sem_t *sem) { /* Take a count from the semaphore, possibly waiting */ if (sem_wait(sem) < 0) { /* EINTR is the only error that we expect */ int errcode = get_errno(); DEBUGASSERT(errcode == EINTR); return -errcode; } return OK; } /**************************************************************************** * Name: ajoy_enable ****************************************************************************/ #if !defined(CONFIG_DISABLE_POLL) || !defined(CONFIG_DISABLE_SIGNALS) static void ajoy_enable(FAR struct ajoy_upperhalf_s *priv) { FAR const struct ajoy_lowerhalf_s *lower = priv->au_lower; FAR struct ajoy_open_s *opriv; ajoy_buttonset_t press; ajoy_buttonset_t release; irqstate_t flags; #ifndef CONFIG_DISABLE_POLL int i; #endif DEBUGASSERT(priv && priv->au_lower); lower = priv->au_lower; /* This routine is called both task level and interrupt level, so * interrupts must be disabled. */ flags = irqsave(); /* Visit each opened reference to the device */ press = 0; release = 0; for (opriv = priv->au_open; opriv; opriv = opriv->ao_flink) { #ifndef CONFIG_DISABLE_POLL /* Are there any poll waiters? */ for (i = 0; i < CONFIG_AJOYSTICK_NPOLLWAITERS; i++) { if (opriv->ao_fds[i]) { /* Yes.. OR in the poll event buttons */ press |= opriv->ao_pollevents.ap_press; release |= opriv->ao_pollevents.ap_release; break; } } #endif #ifndef CONFIG_DISABLE_SIGNALS /* OR in the signal events */ press |= opriv->ao_notify.an_press; release |= opriv->ao_notify.an_release; #endif } /* Enable/disable button interrupts */ DEBUGASSERT(lower->al_enable); if (press != 0 || release != 0) { /* Enable interrupts with the new button set */ lower->al_enable(lower, press, release, (ajoy_handler_t)ajoy_interrupt, priv); } else { /* Disable further interrupts */ lower->al_enable(lower, 0, 0, NULL, NULL); } irqrestore(flags); } #endif /**************************************************************************** * Name: ajoy_interrupt ****************************************************************************/ #if !defined(CONFIG_DISABLE_POLL) || !defined(CONFIG_DISABLE_SIGNALS) static void ajoy_interrupt(FAR const struct ajoy_lowerhalf_s *lower, FAR void *arg) { FAR struct ajoy_upperhalf_s *priv = (FAR struct ajoy_upperhalf_s *)arg; DEBUGASSERT(priv); /* Process the next sample */ ajoy_sample(priv); } #endif /**************************************************************************** * Name: ajoy_sample ****************************************************************************/ static void ajoy_sample(FAR struct ajoy_upperhalf_s *priv) { FAR const struct ajoy_lowerhalf_s *lower = priv->au_lower; FAR struct ajoy_open_s *opriv; ajoy_buttonset_t sample; #if !defined(CONFIG_DISABLE_POLL) || !defined(CONFIG_DISABLE_SIGNALS) ajoy_buttonset_t change; ajoy_buttonset_t press; ajoy_buttonset_t release; #endif irqstate_t flags; #ifndef CONFIG_DISABLE_POLL int i; #endif DEBUGASSERT(priv && priv->au_lower); lower = priv->au_lower; /* This routine is called both task level and interrupt level, so * interrupts must be disabled. */ flags = irqsave(); /* Sample the new button state */ DEBUGASSERT(lower->al_buttons); sample = lower->al_buttons(lower); #if !defined(CONFIG_DISABLE_POLL) || !defined(CONFIG_DISABLE_SIGNALS) /* Determine which buttons have been newly pressed and which have been * newly released. */ change = sample ^ priv->au_sample; press = change & sample; DEBUGASSERT(lower->al_supported); release = change & (lower->al_supported(lower) & ~sample); /* Visit each opened reference to the device */ for (opriv = priv->au_open; opriv; opriv = opriv->ao_flink) { #ifndef CONFIG_DISABLE_POLL /* Have any poll events occurred? */ if ((press & opriv->ao_pollevents.ap_press) != 0 || (release & opriv->ao_pollevents.ap_release) != 0) { /* Yes.. Notify all waiters */ for (i = 0; i < CONFIG_AJOYSTICK_NPOLLWAITERS; i++) { FAR struct pollfd *fds = opriv->ao_fds[i]; if (fds) { fds->revents |= (fds->events & POLLIN); if (fds->revents != 0) { ivdbg("Report events: %02x\n", fds->revents); sem_post(fds->sem); } } } } #endif #ifndef CONFIG_DISABLE_SIGNALS /* Have any signal events occurred? */ if ((press & opriv->ao_notify.an_press) != 0 || (release & opriv->ao_notify.an_release) != 0) { /* Yes.. Signal the waiter */ #ifdef CONFIG_CAN_PASS_STRUCTS union sigval value; value.sival_int = (int)sample; (void)sigqueue(opriv->ao_pid, opriv->ao_notify.an_signo, value); #else (void)sigqueue(opriv->ao_pid, opriv->ao_notify.dn.signo, (FAR void *)sample); #endif } #endif } /* Enable/disable interrupt handling */ ajoy_enable(priv); #endif priv->au_sample = sample; irqrestore(flags); } /**************************************************************************** * Name: ajoy_open ****************************************************************************/ static int ajoy_open(FAR struct file *filep) { FAR struct inode *inode; FAR struct ajoy_upperhalf_s *priv; FAR struct ajoy_open_s *opriv; #ifndef CONFIG_DISABLE_POLL FAR const struct ajoy_lowerhalf_s *lower; ajoy_buttonset_t supported; #endif int ret; DEBUGASSERT(filep && filep->f_inode); inode = filep->f_inode; DEBUGASSERT(inode->i_private); priv = (FAR struct ajoy_upperhalf_s *)inode->i_private; /* Get exclusive access to the driver structure */ ret = ajoy_takesem(&priv->au_exclsem); if (ret < 0) { ivdbg("ERROR: ajoy_takesem failed: %d\n", ret); return ret; } /* Allocate a new open structure */ opriv = (FAR struct ajoy_open_s *)kmm_zalloc(sizeof(struct ajoy_open_s)); if (!opriv) { ivdbg("ERROR: Failled to allocate open structure\n"); ret = -ENOMEM; goto errout_with_sem; } /* Initialize the open structure */ #ifndef CONFIG_DISABLE_POLL lower = priv->au_lower; DEBUGASSERT(lower && lower->al_supported); supported = lower->al_supported(lower); opriv->ao_pollevents.ap_press = supported; opriv->ao_pollevents.ap_release = supported; #endif /* Attach the open structure to the device */ opriv->ao_flink = priv->au_open; priv->au_open = opriv; /* Attach the open structure to the file structure */ filep->f_priv = (FAR void *)opriv; ret = OK; errout_with_sem: ajoy_givesem(&priv->au_exclsem); return ret; } /**************************************************************************** * Name: ajoy_close ****************************************************************************/ static int ajoy_close(FAR struct file *filep) { FAR struct inode *inode; FAR struct ajoy_upperhalf_s *priv; FAR struct ajoy_open_s *opriv; FAR struct ajoy_open_s *curr; FAR struct ajoy_open_s *prev; irqstate_t flags; bool closing; int ret; DEBUGASSERT(filep && filep->f_priv && filep->f_inode); opriv = filep->f_priv; inode = filep->f_inode; DEBUGASSERT(inode->i_private); priv = (FAR struct ajoy_upperhalf_s *)inode->i_private; /* Handle an improbable race conditions with the following atomic test * and set. * * This is actually a pretty feeble attempt to handle this. The * improbable race condition occurs if two different threads try to * close the joystick driver at the same time. The rule: don't do * that! It is feeble because we do not really enforce stale pointer * detection anyway. */ flags = irqsave(); closing = opriv->ao_closing; opriv->ao_closing = true; irqrestore(flags); if (closing) { /* Another thread is doing the close */ return OK; } /* Get exclusive access to the driver structure */ ret = ajoy_takesem(&priv->au_exclsem); if (ret < 0) { ivdbg("ERROR: ajoy_takesem failed: %d\n", ret); return ret; } /* Find the open structure in the list of open structures for the device */ for (prev = NULL, curr = priv->au_open; curr && curr != opriv; prev = curr, curr = curr->ao_flink); DEBUGASSERT(curr); if (!curr) { ivdbg("ERROR: Failed to find open entry\n"); ret = -ENOENT; goto errout_with_exclsem; } /* Remove the structure from the device */ if (prev) { prev->ao_flink = opriv->ao_flink; } else { priv->au_open = opriv->ao_flink; } /* And free the open structure */ kmm_free(opriv); /* Enable/disable interrupt handling */ ajoy_enable(priv); ret = OK; errout_with_exclsem: ajoy_givesem(&priv->au_exclsem); return ret; } /**************************************************************************** * Name: ajoy_read ****************************************************************************/ static ssize_t ajoy_read(FAR struct file *filep, FAR char *buffer, size_t len) { FAR struct inode *inode; FAR struct ajoy_upperhalf_s *priv; FAR const struct ajoy_lowerhalf_s *lower; int ret; DEBUGASSERT(filep && filep->f_inode); inode = filep->f_inode; DEBUGASSERT(inode->i_private); priv = (FAR struct ajoy_upperhalf_s *)inode->i_private; /* Make sure that the buffer is sufficiently large to hold at least one * complete sample. * * REVISIT: Should also check buffer alignment. */ if (len < sizeof(struct ajoy_sample_s)) { ivdbg("ERROR: buffer too small: %lu\n", (unsigned long)len); return -EINVAL; } /* Get exclusive access to the driver structure */ ret = ajoy_takesem(&priv->au_exclsem); if (ret < 0) { ivdbg("ERROR: ajoy_takesem failed: %d\n", ret); return ret; } /* Read and return the current state of the joystick buttons */ lower = priv->au_lower; DEBUGASSERT(lower && lower->al_sample); ret = lower->al_sample(lower, (FAR struct ajoy_sample_s *)buffer); if (ret >= 0) { ret = sizeof(struct ajoy_sample_s); } ajoy_givesem(&priv->au_exclsem); return (ssize_t)ret; } /**************************************************************************** * Name: ajoy_ioctl ****************************************************************************/ static int ajoy_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode; FAR struct ajoy_upperhalf_s *priv; FAR struct ajoy_open_s *opriv; FAR const struct ajoy_lowerhalf_s *lower; int ret; DEBUGASSERT(filep && filep->f_priv && filep->f_inode); opriv = filep->f_priv; inode = filep->f_inode; DEBUGASSERT(inode->i_private); priv = (FAR struct ajoy_upperhalf_s *)inode->i_private; /* Get exclusive access to the driver structure */ ret = ajoy_takesem(&priv->au_exclsem); if (ret < 0) { ivdbg("ERROR: ajoy_takesem failed: %d\n", ret); return ret; } /* Handle the ioctl command */ ret = -EINVAL; switch (cmd) { /* Command: AJOYIOC_SUPPORTED * Description: Report the set of button events supported by the hardware; * Argument: A pointer to writeable integer value in which to return the * set of supported buttons. * Return: Zero (OK) on success. Minus one will be returned on failure * with the errno value set appropriately. */ case AJOYIOC_SUPPORTED: { FAR int *supported = (FAR int *)((uintptr_t)arg); if (supported) { lower = priv->au_lower; DEBUGASSERT(lower && lower->al_supported); *supported = (int)lower->al_supported(lower); ret = OK; } } break; #ifndef CONFIG_DISABLE_POLL /* Command: AJOYIOC_POLLEVENTS * Description: Specify the set of button events that can cause a poll() * to awaken. The default is all button depressions and * all button releases (all supported buttons); * Argument: A read-only pointer to an instance of struct * ajoy_pollevents_s * Return: Zero (OK) on success. Minus one will be returned on * failure with the errno value set appropriately. */ case AJOYIOC_POLLEVENTS: { FAR struct ajoy_pollevents_s *pollevents = (FAR struct ajoy_pollevents_s *)((uintptr_t)arg); if (pollevents) { /* Save the poll events */ opriv->ao_pollevents.ap_press = pollevents->ap_press; opriv->ao_pollevents.ap_release = pollevents->ap_release; /* Enable/disable interrupt handling */ ajoy_enable(priv); ret = OK; } } break; #endif #ifndef CONFIG_DISABLE_SIGNALS /* Command: AJOYIOC_REGISTER * Description: Register to receive a signal whenever there is a change * in any of the joystick discrete inputs. This feature, * of course, depends upon interrupt GPIO support from the * platform. * Argument: A read-only pointer to an instance of struct * ajoy_notify_s * Return: Zero (OK) on success. Minus one will be returned on * failure with the errno value set appropriately. */ case AJOYIOC_REGISTER: { FAR struct ajoy_notify_s *notify = (FAR struct ajoy_notify_s *)((uintptr_t)arg); if (notify) { /* Save the notification events */ opriv->ao_notify.an_press = notify->an_press; opriv->ao_notify.an_release = notify->an_release; opriv->ao_notify.an_signo = notify->an_signo; opriv->ao_pid = getpid(); /* Enable/disable interrupt handling */ ajoy_enable(priv); ret = OK; } } break; #endif default: ivdbg("ERROR: Unrecognized command: %ld\n", cmd); ret = -ENOTTY; break; } ajoy_givesem(&priv->au_exclsem); return ret; } /**************************************************************************** * Name: ajoy_poll ****************************************************************************/ #ifndef CONFIG_DISABLE_POLL static int ajoy_poll(FAR struct file *filep, FAR struct pollfd *fds, bool setup) { FAR struct inode *inode; FAR struct ajoy_upperhalf_s *priv; FAR struct ajoy_open_s *opriv; int ret; int i; DEBUGASSERT(filep && filep->f_priv && filep->f_inode); opriv = filep->f_priv; inode = filep->f_inode; DEBUGASSERT(inode->i_private); priv = (FAR struct ajoy_upperhalf_s *)inode->i_private; /* Get exclusive access to the driver structure */ ret = ajoy_takesem(&priv->au_exclsem); if (ret < 0) { ivdbg("ERROR: ajoy_takesem failed: %d\n", ret); return ret; } /* Are we setting up the poll? Or tearing it down? */ if (setup) { /* This is a request to set up the poll. Find an available * slot for the poll structure reference */ for (i = 0; i < CONFIG_AJOYSTICK_NPOLLWAITERS; i++) { /* Find an available slot */ if (!opriv->ao_fds[i]) { /* Bind the poll structure and this slot */ opriv->ao_fds[i] = fds; fds->priv = &opriv->ao_fds[i]; break; } } if (i >= CONFIG_AJOYSTICK_NPOLLWAITERS) { ivdbg("ERROR: Too man poll waiters\n"); fds->priv = NULL; ret = -EBUSY; goto errout_with_dusem; } } else if (fds->priv) { /* This is a request to tear down the poll. */ FAR struct pollfd **slot = (FAR struct pollfd **)fds->priv; #ifdef CONFIG_DEBUG if (!slot) { ivdbg("ERROR: Poll slot not found\n"); ret = -EIO; goto errout_with_dusem; } #endif /* Remove all memory of the poll setup */ *slot = NULL; fds->priv = NULL; } errout_with_dusem: ajoy_givesem(&priv->au_exclsem); return ret; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: ajoy_register * * Description: * Bind the lower half discrete joystick driver to an instance of the * upper half discrete joystick driver and register the composite character * driver as the specific device. * * Input Parameters: * devname - The name of the discrete joystick device to be registers. * This should be a string of the form "/priv/ajoyN" where N is the the * minor device number. * lower - An instance of the platform-specific discrete joystick lower * half driver. * * Returned Values: * Zero (OK) is returned on success. Otherwise a negated errno value is * returned to indicate the nature of the failure. * ****************************************************************************/ int ajoy_register(FAR const char *devname, FAR const struct ajoy_lowerhalf_s *lower) { FAR struct ajoy_upperhalf_s *priv; int ret; DEBUGASSERT(devname && lower); /* Allocate a new ajoystick driver instance */ priv = (FAR struct ajoy_upperhalf_s *) kmm_zalloc(sizeof(struct ajoy_upperhalf_s)); if (!priv) { ivdbg("ERROR: Failed to allocate device structure\n"); return -ENOMEM; } /* Make sure that all ajoystick interrupts are disabled */ DEBUGASSERT(lower->al_enable); lower->al_enable(lower, 0, 0, NULL, NULL); /* Initialize the new ajoystick driver instance */ priv->au_lower = lower; sem_init(&priv->au_exclsem, 0, 1); DEBUGASSERT(lower->al_buttons); priv->au_sample = lower->al_buttons(lower); /* And register the ajoystick driver */ ret = register_driver(devname, &ajoy_fops, 0666, priv); if (ret < 0) { ivdbg("ERROR: register_driver failed: %d\n", ret); goto errout_with_priv; } return OK; errout_with_priv: sem_destroy(&priv->au_exclsem); kmm_free(priv); return ret; }