/**************************************************************************** * drivers/contactless/mfrc522.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /* This driver is based on Arduino library for MFRC522 from Miguel * Balboa released into the public domain: * https://github.com/miguelbalboa/rfid/ */ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include "mfrc522.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #ifdef CONFIG_CL_MFRC522_DEBUG_TX # define tracetx errdumpbuffer #else # define tracetx(x...) #endif #ifdef CONFIG_CL_MFRC522_DEBUG_RX # define tracerx errdumpbuffer #else # define tracerx(x...) #endif #define FRAME_SIZE(f) (sizeof(struct mfrc522_frame) + f->len + 2) #define FRAME_POSTAMBLE(f) (f->data[f->len + 1]) /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static inline void mfrc522_configspi(FAR struct spi_dev_s *spi); static void mfrc522_lock(FAR struct spi_dev_s *spi); static void mfrc522_unlock(FAR struct spi_dev_s *spi); /* Character driver methods */ static int mfrc522_open(FAR struct file *filep); static int mfrc522_close(FAR struct file *filep); static ssize_t mfrc522_read(FAR struct file *filep, FAR char *buffer, size_t buflen); static ssize_t mfrc522_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int mfrc522_ioctl(FAR struct file *filep, int cmd, unsigned long arg); uint8_t mfrc522_readu8(FAR struct mfrc522_dev_s *dev, uint8_t regaddr); void mfrc522_writeu8(FAR struct mfrc522_dev_s *dev, uint8_t regaddr, FAR uint8_t regval); void mfrc522_writeblk(FAR struct mfrc522_dev_s *dev, uint8_t regaddr, uint8_t *regval, int length); void mfrc522_readblk(FAR struct mfrc522_dev_s *dev, uint8_t regaddr, FAR uint8_t *regval, int length, uint8_t rxalign); void mfrc522_softreset(FAR struct mfrc522_dev_s *dev); int mfrc522_picc_select(FAR struct mfrc522_dev_s *dev, FAR struct picc_uid_s *uid, uint8_t validbits); #if 0 /* TODO */ /* IRQ Handling */ static int mfrc522_irqhandler(FAR int irq, FAR void *context, FAR void *dev); static inline int mfrc522_attachirq(FAR struct mfrc522_dev_s *dev, xcpt_t isr); #endif /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations g_mfrc522fops = { mfrc522_open, /* open */ mfrc522_close, /* close */ mfrc522_read, /* read */ mfrc522_write, /* write */ NULL, /* seek */ mfrc522_ioctl, /* ioctl */ }; /**************************************************************************** * Private Functions ****************************************************************************/ static void mfrc522_lock(FAR struct spi_dev_s *spi) { SPI_LOCK(spi, true); SPI_SETMODE(spi, SPIDEV_MODE0); SPI_SETBITS(spi, 8); SPI_HWFEATURES(spi, 0); SPI_SETFREQUENCY(spi, CONFIG_MFRC522_SPI_FREQ); } static void mfrc522_unlock(FAR struct spi_dev_s *spi) { SPI_LOCK(spi, false); } static inline void mfrc522_configspi(FAR struct spi_dev_s *spi) { /* Configure SPI for the MFRC522 module. */ SPI_SETMODE(spi, SPIDEV_MODE0); SPI_SETBITS(spi, 8); SPI_HWFEATURES(spi, 0); SPI_SETFREQUENCY(spi, CONFIG_MFRC522_SPI_FREQ); } static inline void mfrc522_select(struct mfrc522_dev_s *dev) { SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS(0), true); } static inline void mfrc522_deselect(struct mfrc522_dev_s *dev) { SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS(0), false); } /**************************************************************************** * Name: mfrc522_readu8 * * Description: * Read a byte from a register address. * * Input Parameters: * * Returned Value: the read byte from the register * ****************************************************************************/ uint8_t mfrc522_readu8(FAR struct mfrc522_dev_s *dev, uint8_t regaddr) { uint8_t regval; uint8_t address = (0x80 | (regaddr & 0x7e)); mfrc522_lock(dev->spi); mfrc522_select(dev); SPI_SEND(dev->spi, address); regval = SPI_SEND(dev->spi, 0); mfrc522_deselect(dev); mfrc522_unlock(dev->spi); tracerx("read", ®val, 1); return regval; } /**************************************************************************** * Name: mfrc522_write8 * * Description: * Write a byte to a register address. * * Input Parameters: * * Returned Value: * ****************************************************************************/ void mfrc522_writeu8(FAR struct mfrc522_dev_s *dev, uint8_t regaddr, FAR uint8_t regval) { mfrc522_lock(dev->spi); mfrc522_select(dev); SPI_SEND(dev->spi, regaddr & 0x7e); SPI_SEND(dev->spi, regval); mfrc522_deselect(dev); mfrc522_unlock(dev->spi); tracerx("write", ®val, 1); } /**************************************************************************** * Name: mfrc522_readblk * * Description: * Read a block of bytes from a register address. Align the bit positions * of regval[0] from rxalign..7. * * Input Parameters: * * Returned Value: none * ****************************************************************************/ void mfrc522_readblk(FAR struct mfrc522_dev_s *dev, uint8_t regaddr, FAR uint8_t *regval, int length, uint8_t rxalign) { uint8_t i = 0; uint8_t address = (0x80 | (regaddr & 0x7e)); mfrc522_lock(dev->spi); mfrc522_select(dev); /* Inform the MFRC522 the address we want to read */ SPI_SEND(dev->spi, address); while (i < length) { if (i == 0 && rxalign) { uint8_t mask = 0; uint8_t value; uint8_t j; for (j = rxalign; j <= 7; j++) { mask |= (1 << j); } /* Read the first byte */ value = SPI_SEND(dev->spi, address); /* Apply mask to current regval[0] with the read value */ regval[0] = (regval[0] & ~mask) | (value & mask); } else { /* Read the remaining bytes */ regval[i] = SPI_SEND(dev->spi, address); } i++; } /* Read the last byte. * Send 0 to stop reading (it maybe wrong, 1 byte out) */ regval[i] = SPI_SEND(dev->spi, 0); mfrc522_deselect(dev); mfrc522_unlock(dev->spi); tracerx("readblk", regval, length); } /**************************************************************************** * Name: mfrc522_writeblk * * Description: * Write a block of bytes to a register address. * * Input Parameters: * * Returned Value: none * ****************************************************************************/ void mfrc522_writeblk(FAR struct mfrc522_dev_s *dev, uint8_t regaddr, uint8_t *regval, int length) { uint8_t address = (regaddr & 0x7e); mfrc522_lock(dev->spi); mfrc522_select(dev); /* Inform the MFRC522 the address we want write to */ SPI_SEND(dev->spi, address); /* Send the block of bytes */ SPI_SNDBLOCK(dev->spi, regval, length); mfrc522_deselect(dev); mfrc522_unlock(dev->spi); tracerx("writeblk", regval, length); } /**************************************************************************** * Name: mfrc522_calc_crc * * Description: * Use the CRC coprocessor in the MFRC522 to calculate a CRC_A. * * Input Parameters: * * Returned Value: OK or -ETIMEDOUT * ****************************************************************************/ int mfrc522_calc_crc(FAR struct mfrc522_dev_s *dev, uint8_t *buffer, int length, uint8_t *result) { struct timespec tstart; struct timespec tend; /* Stop any command in execution */ mfrc522_writeu8(dev, MFRC522_COMMAND_REG, MFRC522_IDLE_CMD); /* Clear the CRCIRq interrupt request bit */ mfrc522_writeu8(dev, MFRC522_DIV_IRQ_REG, MFRC522_CRC_IRQ); /* Flush all bytes in the FIFO */ mfrc522_writeu8(dev, MFRC522_FIFO_LEVEL_REG, MFRC522_FLUSH_BUFFER); /* Write data to the FIFO */ mfrc522_writeblk(dev, MFRC522_FIFO_DATA_REG, buffer, length); /* Start the calculation */ mfrc522_writeu8(dev, MFRC522_COMMAND_REG, MFRC522_CALC_CRC_CMD); /* Wait for CRC completion or 200ms time-out */ clock_systime_timespec(&tstart); tstart.tv_nsec += 200000; if (tstart.tv_nsec >= 1000 * 1000 * 1000) { tstart.tv_sec++; tstart.tv_nsec -= 1000 * 1000 * 1000; } while (1) { uint8_t irqreg; irqreg = mfrc522_readu8(dev, MFRC522_DIV_IRQ_REG); if (irqreg & MFRC522_CRC_IRQ) { break; } /* Get time now */ clock_systime_timespec(&tend); if ((tend.tv_sec > tstart.tv_sec) && (tend.tv_nsec > tstart.tv_nsec)) { return -ETIMEDOUT; } } /* Stop calculating CRC for new content of FIFO */ mfrc522_writeu8(dev, MFRC522_COMMAND_REG, MFRC522_IDLE_CMD); result[0] = mfrc522_readu8(dev, MFRC522_CRC_RESULT_REGL); result[1] = mfrc522_readu8(dev, MFRC522_CRC_RESULT_REGH); return OK; } /**************************************************************************** * Name: mfrc522_comm_picc * * Description: * Transfers data to the MFRC522 FIFO, executes a command, waits for * completion and transfers data back from the FIFO. * CRC validation can only be done if back_data and back_len are specified. * * Input Parameters: * * Returned Value: OK or -ETIMEDOUT * ****************************************************************************/ int mfrc522_comm_picc(FAR struct mfrc522_dev_s *dev, uint8_t command, uint8_t waitirq, uint8_t *send_data, uint8_t send_len, uint8_t *back_data, uint8_t *back_len, uint8_t *validbits, uint8_t rxalign, bool checkcrc) { int ret; uint8_t errors; uint8_t vbits; uint8_t value; struct timespec tstart; struct timespec tend; /* Prepare values for BitFramingReg */ uint8_t txlastbits = validbits ? *validbits : 0; uint8_t bitframing = (rxalign << 4) + txlastbits; /* Stop any active command */ mfrc522_writeu8(dev, MFRC522_COMMAND_REG, MFRC522_IDLE_CMD); /* Clear all seven interrupt request bits */ value = mfrc522_readu8(dev, MFRC522_COM_IRQ_REG); mfrc522_writeu8(dev, MFRC522_COM_IRQ_REG, value | MFRC522_COM_IRQ_MASK); /* Flush all bytes in the FIFO */ mfrc522_writeu8(dev, MFRC522_FIFO_LEVEL_REG, MFRC522_FLUSH_BUFFER); /* Write data to FIFO */ mfrc522_writeblk(dev, MFRC522_FIFO_DATA_REG, send_data, send_len); /* Bit adjustments */ mfrc522_writeu8(dev, MFRC522_BIT_FRAMING_REG, bitframing); /* Execute command */ mfrc522_writeu8(dev, MFRC522_COMMAND_REG, command); /* We setup the TAuto flag in the mfrc522_init() then we could use the * internal MFC522 Timer to detect timeout, but because there could be some * hardware fault, let us to use a NuttX timeout as well. */ clock_systime_timespec(&tstart); tstart.tv_nsec += 200000; if (tstart.tv_nsec >= 1000 * 1000 * 1000) { tstart.tv_sec++; tstart.tv_nsec -= 1000 * 1000 * 1000; } /* If it is a Transceive command, then start transmission */ if (command == MFRC522_TRANSCV_CMD) { value = mfrc522_readu8(dev, MFRC522_BIT_FRAMING_REG); mfrc522_writeu8(dev, MFRC522_BIT_FRAMING_REG, value | MFRC522_START_SEND); } /* Wait for the command to complete */ while (1) { uint8_t irqsreg; irqsreg = mfrc522_readu8(dev, MFRC522_COM_IRQ_REG); /* If at least an of selected IRQ happened */ if (irqsreg & waitirq) { break; } /* Timer expired */ if (irqsreg & MFRC522_TIMER_IRQ) { return -ETIMEDOUT; } /* Get time now */ clock_systime_timespec(&tend); if ((tend.tv_sec > tstart.tv_sec) && (tend.tv_nsec > tstart.tv_nsec)) { return -ETIMEDOUT; } } /* Read error register to verify if there are any issue */ errors = mfrc522_readu8(dev, MFRC522_ERROR_REG); /* Check for Protocol error */ if (errors & (MFRC522_PROTO_ERR)) { return -EPROTO; } /* Check for Parity and Buffer Overflow errors */ if (errors & (MFRC522_PARITY_ERR | MFRC522_BUF_OVFL_ERR)) { return -EIO; } /* Check collision error */ if (errors & MFRC522_COLL_ERR) { return -EBUSY; /* should it be EAGAIN ? */ } /* If the caller wants data back, get it from the MFRC522 */ if (back_data && back_len) { uint8_t nbytes; /* Number of bytes in the FIFO */ nbytes = mfrc522_readu8(dev, MFRC522_FIFO_LEVEL_REG); /* Returned more bytes than the expected */ if (nbytes > *back_len) { return -ENOMEM; } *back_len = nbytes; /* Read the data from FIFO */ mfrc522_readblk(dev, MFRC522_FIFO_DATA_REG, back_data, nbytes, rxalign); /* RxLastBits[2:0] indicates the number of valid bits received */ vbits = mfrc522_readu8(dev, MFRC522_CONTROL_REG) & MFRC522_RX_LAST_BITS_MASK; if (validbits) { *validbits = vbits; } } /* Perform CRC_A validation if requested */ if (back_data && back_len && checkcrc) { uint8_t ctrlbuf[2]; /* In this case a MIFARE Classic NAK is not OK */ if (*back_len == 1 && vbits == 4) { return -EACCES; } /* We need the CRC_A value or all 8 bits of the last byte */ if (*back_len < 2 || vbits != 0) { return -EPERM; } /* Verify CRC_A */ ret = mfrc522_calc_crc(dev, &back_data[0], *back_len - 2, &ctrlbuf[0]); if (ret != OK) { return ret; } if ((back_data[*back_len - 2] != ctrlbuf[0]) || (back_data[*back_len - 1] != ctrlbuf[1])) { return -EFAULT; } } return OK; } /**************************************************************************** * Name: mfrc522_transcv_data * * Description: * Executes the Transceive command * * Input Parameters: * * Returned Value: OK or -ETIMEDOUT * ****************************************************************************/ int mfrc522_transcv_data(FAR struct mfrc522_dev_s *dev, uint8_t *senddata, uint8_t sendlen, uint8_t *backdata, uint8_t *backlen, uint8_t *validbits, uint8_t rxalign, bool check_crc) { uint8_t waitirq = MFRC522_RX_IRQ | MFRC522_IDLE_IRQ; return mfrc522_comm_picc(dev, MFRC522_TRANSCV_CMD, waitirq, senddata, sendlen, backdata, backlen, validbits, rxalign, check_crc); } /**************************************************************************** * Name: mfrc522_picc_reqa_wupa * * Description: * Transmits REQA or WUPA commands * * Input Parameters: * * Returned Value: OK or -ETIMEDOUT * ****************************************************************************/ int mfrc522_picc_reqa_wupa(FAR struct mfrc522_dev_s *dev, uint8_t command, uint8_t *buffer, uint8_t length) { uint8_t validbits; uint8_t value; int status; if (!buffer || length < 2) { return -EINVAL; } /* Force clear of received bits if a collision is detected */ value = mfrc522_readu8(dev, MFRC522_COLL_REG); mfrc522_writeu8(dev, MFRC522_COLL_REG, value & MFRC522_VALUES_AFTER_COLL); validbits = 7; status = mfrc522_transcv_data(dev, &command, 1, buffer, &length, &validbits, 0, false); /* For REQA and WUPA we need to transmit only 7 bits */ if (status != OK) { return status; } /* ATQA must be exactly 16 bits */ if (length != 2 || validbits != 0) { return -EAGAIN; } ctlsinfo("buffer[0]=0x%02X | buffer[1]=0x%02X\n", buffer[0], buffer[1]); return OK; } /**************************************************************************** * Name: mfrc522_picc_request_a * * Description: * Transmits a REQuest command, Type A. Invites PICCs in state IDLE to go * to READY and prepare for anticollision or selection. * * Input Parameters: * * Returned Value: OK or -ETIMEDOUT * ****************************************************************************/ int mfrc522_picc_request_a(FAR struct mfrc522_dev_s *dev, uint8_t *buffer, uint8_t length) { return mfrc522_picc_reqa_wupa(dev, PICC_CMD_REQA, buffer, length); } /**************************************************************************** * Name: mfrc522_picc_detect * * Description: * Detects if a Contactless Card is near * * Input Parameters: * * Returned Value: OK or -ETIMEDOUT * ****************************************************************************/ int mfrc522_picc_detect(FAR struct mfrc522_dev_s *dev) { int ret; uint8_t buffer_atqa[2]; uint8_t length = sizeof(buffer_atqa); /* Send a REQA command */ ret = mfrc522_picc_request_a(dev, buffer_atqa, length); return (ret == OK || ret == -EBUSY); } /**************************************************************************** * Name: mfrc522_picc_select * * Description: * Selects a near Card and read its UID. * * Input Parameters: * * Returned Value: OK or -ETIMEDOUT * ****************************************************************************/ int mfrc522_picc_select(FAR struct mfrc522_dev_s *dev, FAR struct picc_uid_s *uid, uint8_t validbits) { bool uid_complete; bool select_done; bool use_cascade_tag; uint8_t cascade_level = 1; int result; uint8_t i; uint8_t value; uint8_t count; /* The first index in uid->data[] that is used in the current Cascade * Level */ uint8_t uid_index; /* The number of known UID bits in the current Cascade Level. */ int8_t curr_level_known_bits; /* The SELECT/ANTICOLLISION uses a 7 byte standard frame + 2 bytes CRC_A */ uint8_t buffer[9]; /* The number of bytes used in the buffer, number bytes on FIFO */ uint8_t buffer_used; /* Used to defines the bit position for the first bit received */ uint8_t rxalign; /* The number of valid bits in the last transmitted byte. */ uint8_t txlastbits; uint8_t *resp_buf; uint8_t resp_len; /* Sanity check */ if (validbits > 80) { return -EINVAL; } /* Force clear of received bits if a collision is detected */ value = mfrc522_readu8(dev, MFRC522_COLL_REG); mfrc522_writeu8(dev, MFRC522_COLL_REG, value & MFRC522_VALUES_AFTER_COLL); /* Repeat cascade level loop until we have a complete UID */ uid_complete = false; while (!uid_complete) { uint8_t bytes_to_copy; /* Set the Cascade Level in the SEL byte, find out if we need to use * the Cascade Tag in byte 2. */ switch (cascade_level) { case 1: buffer[0] = PICC_CMD_SEL_CL1; uid_index = 0; /* When we know that the UID has more than 4 bytes */ use_cascade_tag = validbits && (uid->size > 4); break; case 2: buffer[0] = PICC_CMD_SEL_CL2; uid_index = 3; /* When we know that the UID has more than 7 bytes */ use_cascade_tag = validbits && (uid->size > 7); break; case 3: buffer[0] = PICC_CMD_SEL_CL3; uid_index = 6; use_cascade_tag = false; break; default: return -EIO; /* Internal error */ } /* How many UID bits are known in this Cascade Level? */ curr_level_known_bits = validbits - (8 * uid_index); if (curr_level_known_bits < 0) { curr_level_known_bits = 0; } /* Copy the known bits from uid->uid_data[] to buffer[] */ i = 2; /* destination index in buffer[] */ if (use_cascade_tag) { buffer[i++] = PICC_CMD_CT; } /* Number of bytes needed to represent the known bits for this level */ bytes_to_copy = curr_level_known_bits / 8 + (curr_level_known_bits % 8 ? 1 : 0); if (bytes_to_copy) { /* Max 4 bytes in each Cascade Level. Only 3 left if we use the * Cascade Tag. */ uint8_t max_bytes = use_cascade_tag ? 3 : 4; if (bytes_to_copy > max_bytes) { bytes_to_copy = max_bytes; } for (count = 0; count < bytes_to_copy; count++) { buffer[i++] = uid->uid_data[uid_index + count]; } } /* Now that the data has been copied we need to include the 8 bits in * CT in curr_level_known_bits. */ if (use_cascade_tag) { curr_level_known_bits += 8; } /* Repeat anti collision loop until we can transmit all UID bits + BCC * and receive a SAK - max 32 iterations. */ select_done = false; while (!select_done) { /* Find out how many bits and bytes to send and receive. */ if (curr_level_known_bits >= 32) { /* All UID bits in this Cascade Level are known. This is a * SELECT. */ /* NVB - Number of Valid Bits: Seven whole bytes */ buffer[1] = 0x70; /* Calculate BCC - Block Check Character */ buffer[6] = buffer[2] ^ buffer[3] ^ buffer[4] ^ buffer[5]; /* Calculate CRC_A */ result = mfrc522_calc_crc(dev, buffer, 7, &buffer[7]); if (result != OK) { return result; } txlastbits = 0; /* 0 => All 8 bits are valid. */ buffer_used = 9; /* Store response in the last 3 bytes of buffer * (BCC and CRC_A - not needed after tx). */ resp_buf = &buffer[6]; resp_len = 3; } else { /* This is an ANTICOLLISION */ txlastbits = curr_level_known_bits % 8; /* Number of whole bytes in the UID part. */ count = curr_level_known_bits / 8; i = 2 + count; /* NVB - Number of Valid Bits */ buffer[1] = (i << 4) + txlastbits; buffer_used = i + (txlastbits ? 1 : 0); /* Store response in the unused part of buffer */ resp_buf = &buffer[i]; resp_len = sizeof(buffer) - i; } /* Set bit adjustments */ rxalign = txlastbits; mfrc522_writeu8(dev, MFRC522_BIT_FRAMING_REG, (rxalign << 4) + txlastbits); /* Transmit the buffer and receive the response */ result = mfrc522_transcv_data(dev, buffer, buffer_used, resp_buf, &resp_len, &txlastbits, rxalign, false); /* More than one PICC in the field => collision */ if (result == -EBUSY) { uint8_t coll_pos; uint8_t coll_reg = mfrc522_readu8(dev, MFRC522_COLL_REG); /* CollPosNotValid */ if (coll_reg & 0x20) { /* Without a valid collision position we cannot continue */ return -EBUSY; } coll_pos = coll_reg & 0x1f; /* Values 0-31, 0 means bit 32. */ if (coll_pos == 0) { coll_pos = 32; } if (coll_pos <= curr_level_known_bits) { /* No progress - should not happen */ return -EIO; } /* Choose the PICC with the bit set. */ curr_level_known_bits = coll_pos; /* The bit to modify */ count = (curr_level_known_bits - 1) % 8; /* First byte is index 0. */ i = 1 + (curr_level_known_bits / 8) + (count ? 1 : 0); buffer[i] |= (1 << count); } else if (result != OK) { return result; } else /* OK */ { /* This was a SELECT. */ if (curr_level_known_bits >= 32) { /* No more collision */ select_done = true; } else { /* This was an ANTICOLLISION. */ /* We have all 32 bits of the UID in this Cascade Level */ curr_level_known_bits = 32; /* Run loop again to do the SELECT */ } } } /* We do not check the CBB - it was constructed by us above. */ /* Copy the found UID bytes from buffer[] to uid->uid_data[] */ i = (buffer[2] == PICC_CMD_CT) ? 3 : 2; /* source index in buffer[] */ bytes_to_copy = (buffer[2] == PICC_CMD_CT) ? 3 : 4; for (count = 0; count < bytes_to_copy; count++) { uid->uid_data[uid_index + count] = buffer[i++]; } /* Check response SAK (Select Acknowledge) */ if (resp_len != 3 || txlastbits != 0) { /* SAK must be exactly 24 bits (1 byte + CRC_A). */ return -EIO; } /* Verify CRC_A - do our own calculation and store the control in * buffer[2..3] - those bytes are not needed anymore. */ result = mfrc522_calc_crc(dev, resp_buf, 1, &buffer[2]); if (result != OK) { return result; } /* Is it correct */ if ((buffer[2] != resp_buf[1]) || (buffer[3] != resp_buf[2])) { return -EINVAL; } /* Cascade bit set - UID not complete yes */ if (resp_buf[0] & 0x04) { cascade_level++; } else { uid_complete = true; uid->sak = resp_buf[0]; } } /* Set correct uid->size */ uid->size = 3 * cascade_level + 1; return OK; } /**************************************************************************** * Name: mfrc522_softreset * * Description: * Send a software reset command * * Input Parameters: a pointer to mfrc522_dev_s structure * * Returned Value: none * ****************************************************************************/ void mfrc522_softreset(FAR struct mfrc522_dev_s *dev) { /* Send a software reset command */ mfrc522_writeu8(dev, MFRC522_COMMAND_REG, MFRC522_SOFTRST_CMD); /* Wait the internal state machine to initialize */ nxsig_usleep(50000); /* Wait for the PowerDown bit in COMMAND_REG to be cleared */ while (mfrc522_readu8(dev, MFRC522_COMMAND_REG) & MFRC522_POWER_DOWN); } /**************************************************************************** * Name: mfrc522_enableantenna * * Description: * Turns the antenna on by enabling the pins TX1 and TX2 * * Input Parameters: a pointer to mfrc522_dev_s structure * * Returned Value: none * ****************************************************************************/ void mfrc522_enableantenna(FAR struct mfrc522_dev_s *dev) { uint8_t value = mfrc522_readu8(dev, MFRC522_TX_CTRL_REG); if ((value & (MFRC522_TX1_RF_EN | MFRC522_TX2_RF_EN)) != 0x03) { mfrc522_writeu8(dev, MFRC522_TX_CTRL_REG, value | 0x03); } } /**************************************************************************** * Name: mfrc522_disableantenna * * Description: * Turns the antenna off cutting the signals on TX1 and TX2 * * Input Parameters: a pointer to mfrc522_dev_s structure * * Returned Value: none * ****************************************************************************/ void mfrc522_disableantenna(FAR struct mfrc522_dev_s *dev) { uint8_t value = mfrc522_readu8(dev, MFRC522_TX_CTRL_REG); value &= ~(MFRC522_TX1_RF_EN | MFRC522_TX2_RF_EN); mfrc522_writeu8(dev, MFRC522_TX_CTRL_REG, value); } /**************************************************************************** * Name: mfrc522_getfwversion * * Description: * Read the MFRC522 firmware version. * * Input Parameters: a pointer to mfrc522_dev_s structure * * Returned Value: the firmware version byte * ****************************************************************************/ uint8_t mfrc522_getfwversion(FAR struct mfrc522_dev_s *dev) { return mfrc522_readu8(dev, MFRC522_VERSION_REG); } /**************************************************************************** * Name: mfrc522_getantennagain * * Description: * Read the MFRC522 receiver gain (RxGain). * See 9.3.3.6 / table 98 in MFRC522 datasheet. * * Input Parameters: a pointer to mfrc522_dev_s structure * * Returned Value: none * ****************************************************************************/ uint8_t mfrc522_getantennagain(FAR struct mfrc522_dev_s *dev) { return mfrc522_readu8(dev, MFRC522_RF_CFG_REG) & MFRC522_RX_GAIN_MASK; } /**************************************************************************** * Name: mfrc522_setantennagain * * Description: * Set the MFRC522 receiver gain (RxGain) to value value specified in mask. * See 9.3.3.6 / table 98 in MFRC522 datasheet. * * Input Parameters: a pointer to mfrc522_dev_s structure * * Returned Value: none * ****************************************************************************/ void mfrc522_setantennagain(FAR struct mfrc522_dev_s *dev, uint8_t mask) { uint8_t value; if ((value = mfrc522_getantennagain(dev)) != mask) { mfrc522_writeu8(dev, MFRC522_RF_CFG_REG, value & ~MFRC522_RX_GAIN_MASK); mfrc522_writeu8(dev, MFRC522_RF_CFG_REG, mask & MFRC522_RX_GAIN_MASK); } } /**************************************************************************** * Name: mfrc522_mifare_read ****************************************************************************/ int mfrc522_mifare_read(FAR struct mfrc522_dev_s *dev, FAR struct mifare_tag_data_s *data) { uint8_t buffer[18]; uint8_t command[4]; uint8_t length = 18; uint8_t validbits = 0; int ret = OK; /* Read block from address */ command[0] = PICC_CMD_MF_READ; command[1] = data->address; /* Get CRC */ ret = mfrc522_calc_crc(dev, command, 2, &command[2]); if (ret != OK) { goto errout; } /* Send data and read response. * We read back 16 bytes block data nad 2 bytes CRC. */ ret = mfrc522_transcv_data(dev, command, 4, buffer, &length, &validbits, 0, false); if (ret < 0) { goto errout; } /* Copy block data */ memcpy(data->data, buffer, 16); errout: return ret; } /**************************************************************************** * Name: mfrc522_init * * Description: * Initializes the MFRC522 chip * * Input Parameters: a pointer to mfrc522_dev_s structure * * Returned Value: none * ****************************************************************************/ void mfrc522_init(FAR struct mfrc522_dev_s *dev) { /* Force a reset */ mfrc522_softreset(dev); /* We need a timeout if something when communicating with a TAG case * something goes wrong. f_timer = 13.56 MHz / (2*TPreScaler+1) where: * TPreScaler = [TPrescaler_Hi:Tprescaler_Lo]. Tprescaler_Hi are the four * low bits in TmodeReg. Tprescaler_Lo is on TPrescalerReg. * * TAuto=1; timer starts automatically at the end of the transmission in * all communication modes at all speeds. */ mfrc522_writeu8(dev, MFRC522_TMODE_REG, MFRC522_TAUTO); /* TPreScaler = TModeReg[3..0]:TPrescalerReg, ie: 0x0A9 = 169 => * f_timer=40kHz, then the timer period will be 25us. */ mfrc522_writeu8(dev, MFRC522_TPRESCALER_REG, 0xa9); /* Reload timer with 0x3E8 = 1000, ie 25ms before timeout. */ mfrc522_writeu8(dev, MFRC522_TRELOAD_REGH, 0x06); mfrc522_writeu8(dev, MFRC522_TRELOAD_REGL, 0xe8); /* Force 100% ASK modulation independent of the ModGsPReg setting */ mfrc522_writeu8(dev, MFRC522_TX_ASK_REG, MFRC522_FORCE_100ASK); /* Set the preset value for the CRC to 0x6363 (ISO 14443-3 part 6.2.4) */ mfrc522_writeu8(dev, MFRC522_MODE_REG, 0x3d); /* Enable the Antenna pins */ mfrc522_enableantenna(dev); } /**************************************************************************** * Name: mfrc522_selftest * * Description: * Executes a self-test of the MFRC522 chip * * See 16.1.1 in the MFRC522 datasheet * * Input Parameters: a pointer to mfrc522_dev_s structure * * Returned Value: none * ****************************************************************************/ int mfrc522_selftest(FAR struct mfrc522_dev_s *dev) { uint8_t zeros[25] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; char outbuf[3 * 8 + 1]; uint8_t result[64]; int i; int j; int k; /* Execute a software reset */ mfrc522_softreset(dev); /* Flush the FIFO buffer */ mfrc522_writeu8(dev, MFRC522_FIFO_LEVEL_REG, MFRC522_FLUSH_BUFFER); /* Clear the internal buffer by writing 25 bytes 0x00 */ mfrc522_writeblk(dev, MFRC522_FIFO_DATA_REG, zeros, 25); /* Transfer to internal buffer */ mfrc522_writeu8(dev, MFRC522_COMMAND_REG, MFRC522_MEM_CMD); /* Enable self-test */ mfrc522_writeu8(dev, MFRC522_AUTOTEST_REG, MFRC522_SELFTEST_EN); /* Write 0x00 to FIFO buffer */ mfrc522_writeu8(dev, MFRC522_FIFO_DATA_REG, 0x00); /* Start self-test by issuing the CalcCRC command */ mfrc522_writeu8(dev, MFRC522_COMMAND_REG, MFRC522_CALC_CRC_CMD); /* Wait for self-test to complete */ for (i = 0; i < 255; i++) { uint8_t n; n = mfrc522_readu8(dev, MFRC522_DIV_IRQ_REG); if (n & MFRC522_CRC_IRQ) { break; } } /* Stop calculating CRC for new content in the FIFO */ mfrc522_writeu8(dev, MFRC522_COMMAND_REG, MFRC522_IDLE_CMD); /* Read out the 64 bytes result from the FIFO buffer */ mfrc522_readblk(dev, MFRC522_FIFO_DATA_REG, result, 64, 0); /* Self-test done. Reset AutoTestReg register to normal operation */ mfrc522_writeu8(dev, MFRC522_AUTOTEST_REG, 0x00); ctlsinfo("Self Test Result:\n"); for (i = 0; i < 64; i += 8) { for (j = 0, k = 0; j < 8; j++, k += 3) { snprintf(&outbuf[k], sizeof(outbuf) - k, " %02x", result[i + j]); } ctlsinfo(" %02x:%s\n", i, outbuf); } ctlsinfo("Done!\n"); return OK; } /**************************************************************************** * Name: mfrc522_open * * Description: * This function is called whenever the MFRC522 device is opened. * ****************************************************************************/ static int mfrc522_open(FAR struct file *filep) { FAR struct inode *inode; FAR struct mfrc522_dev_s *dev; DEBUGASSERT(filep); inode = filep->f_inode; DEBUGASSERT(inode && inode->i_private); dev = inode->i_private; mfrc522_configspi(dev->spi); nxsig_usleep(10000); mfrc522_getfwversion(dev); dev->state = MFRC522_STATE_IDLE; return OK; } /**************************************************************************** * Name: mfrc522_close * * Description: * This routine is called when the MFRC522 device is closed. * ****************************************************************************/ static int mfrc522_close(FAR struct file *filep) { FAR struct inode *inode; FAR struct mfrc522_dev_s *dev; DEBUGASSERT(filep); inode = filep->f_inode; DEBUGASSERT(inode && inode->i_private); dev = inode->i_private; dev->state = MFRC522_STATE_NOT_INIT; return OK; } /**************************************************************************** * Name: mfrc522_read * * Description: * This routine is called when the device is read. * * Returns TAG id as string to buffer. * or -EIO if no TAG found * ****************************************************************************/ static ssize_t mfrc522_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct inode *inode; FAR struct mfrc522_dev_s *dev; FAR struct picc_uid_s uid; DEBUGASSERT(filep); inode = filep->f_inode; DEBUGASSERT(inode && inode->i_private); dev = inode->i_private; /* Is a card near? */ if (!mfrc522_picc_detect(dev)) { ctlserr("Card is not present!\n"); return -EAGAIN; } /* Now read the UID */ mfrc522_picc_select(dev, &uid, 0); if (uid.sak != PICC_TYPE_NOT_COMPLETE) { /* TODO: double/triple UID */ if (buffer) { snprintf(buffer, buflen, "0x%02X%02X%02X%02X", uid.uid_data[0], uid.uid_data[1], uid.uid_data[2], uid.uid_data[3]); return buflen; } } return OK; } /**************************************************************************** * Name: mfrc522_write ****************************************************************************/ static ssize_t mfrc522_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { FAR struct inode *inode; FAR struct mfrc522_dev_s *dev; DEBUGASSERT(filep); inode = filep->f_inode; DEBUGASSERT(inode && inode->i_private); dev = inode->i_private; UNUSED(dev); return -ENOSYS; } /**************************************************************************** * Name: mfrc522_ioctl ****************************************************************************/ static int mfrc522_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode; FAR struct mfrc522_dev_s *dev; int ret = OK; DEBUGASSERT(filep); inode = filep->f_inode; DEBUGASSERT(inode && inode->i_private); dev = inode->i_private; switch (cmd) { case MFRC522IOC_GET_PICC_UID: { FAR struct picc_uid_s *uid = (FAR struct picc_uid_s *)arg; /* Is a card near? */ ret = mfrc522_picc_detect(dev); if (ret < 0) { goto errout; } /* Get UID and select card */ ret = mfrc522_picc_select(dev, uid, 0); if (ret < 0) { goto errout; } break; } case CLIOC_READ_MIFARE_DATA: { FAR struct mifare_tag_data_s *data = (struct mifare_tag_data_s *)arg; /* We assume that tag is selected! * * TODO: authentication for MIFARE Classic. * Without authentication this will works only for MIFARE * Ultralight. */ ret = mfrc522_mifare_read(dev, data); break; } case MFRC522IOC_GET_STATE: { ret = dev->state; break; } default: { ctlserr("ERROR: Unrecognized cmd: %d\n", cmd); ret = -ENOTTY; break; } } errout: return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: mfrc522_register * * Description: * Register the MFRC522 character device as 'devpath' * * Input Parameters: * devpath - The full path to the driver to register. * E.g., "/dev/rfid0" * spi - An instance of the SPI interface to use to communicate with * MFRC522. * config - chip config * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int mfrc522_register(FAR const char *devpath, FAR struct spi_dev_s *spi) { FAR struct mfrc522_dev_s *dev; uint8_t fwver; int ret = 0; /* Initialize the MFRC522 device structure */ dev = (FAR struct mfrc522_dev_s *)kmm_malloc(sizeof(struct mfrc522_dev_s)); if (!dev) { ctlserr("ERROR: Failed to allocate instance\n"); return -ENOMEM; } dev->spi = spi; /* Device is not initialized yet */ dev->state = MFRC522_STATE_NOT_INIT; #if defined CONFIG_PM dev->pm_level = PM_IDLE; #endif /* mfrc522_attachirq(dev, mfrc522_irqhandler); */ /* Initialize the MFRC522 */ mfrc522_init(dev); /* Device initialized and idle */ dev->state = MFRC522_STATE_IDLE; /* Read the Firmware Version */ fwver = mfrc522_getfwversion(dev); ctlsinfo("MFRC522 Firmware Version: 0x%02X!\n", fwver); /* If returned firmware version is unknown don't register the device */ if (fwver != 0x90 && fwver != 0x91 && fwver != 0x92 && fwver != 0x88) { ctlserr("None supported device detected!\n"); goto firmware_error; } /* Register the character driver */ ret = register_driver(devpath, &g_mfrc522fops, 0666, dev); if (ret < 0) { ctlserr("ERROR: Failed to register driver: %d\n", ret); kmm_free(dev); } return ret; firmware_error: kmm_free(dev); return -ENODEV; }