/**************************************************************************** * binfmt/libnxflat/libnxflat_bind.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include "libnxflat.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* CONFIG_DEBUG_FEATURES, CONFIG_DEBUG_INFO, and CONFIG_DEBUG_BINFMT have to * be defined or CONFIG_NXFLAT_DUMPBUFFER does nothing. */ #if !defined(CONFIG_DEBUG_INFO) || !defined (CONFIG_DEBUG_BINFMT) # undef CONFIG_NXFLAT_DUMPBUFFER #endif #ifdef CONFIG_NXFLAT_DUMPBUFFER # define nxflat_dumpbuffer(m,b,n) binfodumpbuffer(m,b,n) #else # define nxflat_dumpbuffer(m,b,n) #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: nxflat_bindrel32i * * Description: * Perform the NXFLAT_RELOC_TYPE_REL32I binding: * * Meaning: Object file contains a 32-bit offset into I-Space at the * offset. * Fixup: Add mapped I-Space address to the offset. * * Returned Value: * 0 (OK) is returned on success and a negated errno is returned on * failure. * ****************************************************************************/ static inline int nxflat_bindrel32i(FAR struct nxflat_loadinfo_s *loadinfo, uint32_t offset) { FAR uint32_t *addr; binfo("NXFLAT_RELOC_TYPE_REL32I Offset: %08" PRIx32 " I-Space: %" PRIxPTR "\n", offset, loadinfo->ispace + sizeof(struct nxflat_hdr_s)); if (offset < loadinfo->dsize) { addr = (FAR uint32_t *)(offset + loadinfo->dspace->region); binfo(" Before: %08" PRIx32 "\n", *addr); *addr += (uint32_t)(loadinfo->ispace + sizeof(struct nxflat_hdr_s)); binfo(" After: %08" PRIx32 "\n", *addr); return OK; } else { berr("Offset: %08" PRIx32 " does not lie in " "D-Space size: %08" PRIx32 "\n", offset, loadinfo->dsize); return -EINVAL; } } /**************************************************************************** * Name: nxflat_bindrel32d * * Description: * Perform the NXFLAT_RELOC_TYPE_REL32D binding: * * Meaning: Object file contains a 32-bit offset into D-Space at the * offset. * Fixup: Add allocated D-Space address to the offset. * * Returned Value: * 0 (OK) is returned on success and a negated errno is returned on * failure. * ****************************************************************************/ static inline int nxflat_bindrel32d(FAR struct nxflat_loadinfo_s *loadinfo, uint32_t offset) { FAR uint32_t *addr; binfo("NXFLAT_RELOC_TYPE_REL32D Offset: %08" PRIx32 " D-Space: %p\n", offset, loadinfo->dspace->region); if (offset < loadinfo->dsize) { addr = (FAR uint32_t *)(offset + loadinfo->dspace->region); binfo(" Before: %08" PRIx32 "\n", *addr); *addr += (uint32_t)(loadinfo->dspace->region); binfo(" After: %08" PRIx32 "\n", *addr); return OK; } else { berr("Offset: %08" PRIx32 " does not lie in " "D-Space size: %08" PRIx32 "\n", offset, loadinfo->dsize); return -EINVAL; } } /**************************************************************************** * Name: nxflat_bindrel32id * * Description: * Perform the NXFLAT_RELOC_TYPE_REL32ID binding: * * Meaning: Object file contains a 32-bit offset into I-Space at the offset * that will unfortunately be references relative to the GOT * Fixup: Add allocated the mapped I-Space address MINUS the allocated * D-Space address to the offset. * * Returned Value: * 0 (OK) is returned on success and a negated errno is returned on * failure. * ****************************************************************************/ #ifdef NXFLAT_RELOC_TYPE_REL32ID static inline int nxflat_bindrel32id(FAR struct nxflat_loadinfo_s *loadinfo, uint32_t offset) { FAR uint32_t *addr; binfo("NXFLAT_RELOC_TYPE_REL32D Offset: %08x D-Space: %p\n", offset, loadinfo->dspace->region); if (offset < loadinfo->dsize) { addr = (FAR uint32_t *)(offset + loadinfo->dspace->region); binfo(" Before: %08x\n", *addr); *addr += ((uint32_t)loadinfo->ispace - (uint32_t)(loadinfo->dspace->region)); binfo(" After: %08x\n", *addr); return OK; } else { berr("Offset: %08 does not lie in D-Space size: %08x\n", offset, loadinfo->dsize); return -EINVAL; } } #endif /**************************************************************************** * Name: nxflat_gotrelocs * * Description: * Bind all of the GOT relocations in the loaded module described by * 'loadinfo' * * Returned Value: * 0 (OK) is returned on success and a negated errno is returned on * failure. * ****************************************************************************/ static inline int nxflat_gotrelocs(FAR struct nxflat_loadinfo_s *loadinfo) { FAR struct nxflat_reloc_s *relocs; FAR struct nxflat_reloc_s reloc; FAR struct nxflat_hdr_s *hdr; uint32_t offset; uint16_t nrelocs; int ret; int result; int i; /* The NXFLAT header is the first thing at the beginning of the ISpace. */ hdr = (FAR struct nxflat_hdr_s *)loadinfo->ispace; /* From this, we can get the offset to the list of relocation entries */ offset = NTOHL(hdr->h_relocstart); nrelocs = NTOHS(hdr->h_reloccount); binfo("offset: %08lx nrelocs: %d\n", (long)offset, nrelocs); /* The value of the relocation list that we get from the header is a * file offset. We will have to convert this to an offset into the * DSpace segment to get the pointer to the beginning of the relocation * list. */ DEBUGASSERT(offset >= loadinfo->isize); DEBUGASSERT(offset + nrelocs * sizeof(struct nxflat_reloc_s) <= (loadinfo->isize + loadinfo->dsize)); relocs = (FAR struct nxflat_reloc_s *) (offset - loadinfo->isize + loadinfo->dspace->region); binfo("isize: %08lx dpsace: %p relocs: %p\n", (long)loadinfo->isize, loadinfo->dspace->region, relocs); /* All relocations are performed within the D-Space allocation. If * CONFIG_ARCH_ADDRENV=y, then that D-Space allocation lies in an address * environment that may not be in place. So, in that case, we must call * nxflat_addrenv_select to temporarily instantiate that address space * before the relocations can be performed. */ #ifdef CONFIG_ARCH_ADDRENV ret = nxflat_addrenv_select(loadinfo); if (ret < 0) { berr("ERROR: nxflat_addrenv_select() failed: %d\n", ret); return ret; } #endif /* Now, traverse the relocation list of and bind each GOT relocation. */ ret = OK; /* Assume success */ for (i = 0; i < nrelocs; i++) { /* Handle the relocation by the relocation type */ reloc = *relocs++; result = OK; switch (NXFLAT_RELOC_TYPE(reloc.r_info)) { /* NXFLAT_RELOC_TYPE_REL32I Meaning: Object file contains a 32-bit * offset into I-Space at the * offset. * Fixup: Add mapped I-Space address * to the offset. */ case NXFLAT_RELOC_TYPE_REL32I: { result = nxflat_bindrel32i(loadinfo, NXFLAT_RELOC_OFFSET(reloc.r_info)); } break; /* NXFLAT_RELOC_TYPE_REL32D Meaning: Object file contains a 32-bit * offset into D-Space at the * offset. * Fixup: Add allocated D-Space address * to the offset. */ case NXFLAT_RELOC_TYPE_REL32D: { result = nxflat_bindrel32d(loadinfo, NXFLAT_RELOC_OFFSET(reloc.r_info)); } break; /* NXFLAT_RELOC_TYPE_REL32ID Meaning: Object file contains a 32-bit * offset into I-Space at the * offset that will unfortunately * be references relative to the * GOT * Fixup: Add allocated the mapped * I-Space address MINUS the * allocated D-Space address to * the offset. */ #ifdef NXFLAT_RELOC_TYPE_REL32ID case NXFLAT_RELOC_TYPE_REL32ID: { result = nxflat_bindrel32id(loadinfo, NXFLAT_RELOC_OFFSET(reloc.r_info)); } break; #endif default: { berr("ERROR: Unrecognized relocation type: %" PRId32 "\n", (uint32_t)NXFLAT_RELOC_TYPE(reloc.r_info)); result = -EINVAL; } break; } /* Check for failures */ if (result < 0 && ret == OK) { ret = result; } } /* Dump the relocation got */ #ifdef CONFIG_NXFLAT_DUMPBUFFER if (ret == OK && nrelocs > 0) { relocs = (FAR struct nxflat_reloc_s *) (offset - loadinfo->isize + loadinfo->dspace->region); nxflat_dumpbuffer("GOT", (FAR const uint8_t *)relocs, nrelocs * sizeof(struct nxflat_reloc_s)); } #endif /* Restore the original address environment */ #ifdef CONFIG_ARCH_ADDRENV ret = nxflat_addrenv_restore(loadinfo); if (ret < 0) { berr("ERROR: nxflat_addrenv_restore() failed: %d\n", ret); } #endif return ret; } /**************************************************************************** * Name: nxflat_bindimports * * Description: * Bind the imported symbol names in the loaded module described by * 'loadinfo' using the exported symbol values provided by 'symtab' * * Returned Value: * 0 (OK) is returned on success and a negated errno is returned on * failure. * ****************************************************************************/ static inline int nxflat_bindimports(FAR struct nxflat_loadinfo_s *loadinfo, FAR const struct symtab_s *exports, int nexports) { FAR struct nxflat_import_s *imports; FAR struct nxflat_hdr_s *hdr; FAR const struct symtab_s *symbol; FAR char *symname; uint32_t offset; uint16_t nimports; #ifdef CONFIG_ARCH_ADDRENV int ret; #endif int i; /* The NXFLAT header is the first thing at the beginning of the ISpace. */ hdr = (FAR struct nxflat_hdr_s *)loadinfo->ispace; /* From this, we can get the offset to the list of symbols imported by * this module and the number of symbols imported by this module. */ offset = NTOHL(hdr->h_importsymbols); nimports = NTOHS(hdr->h_importcount); binfo("Imports offset: %08" PRIx32 " nimports: %d\n", offset, nimports); /* The import[] table resides within the D-Space allocation. If * CONFIG_ARCH_ADDRENV=y, then that D-Space allocation lies in an address * environment that may not be in place. So, in that case, we must call * nxflat_addrenv_select to temporarily instantiate that address space * before the import[] table can be modified. */ #ifdef CONFIG_ARCH_ADDRENV ret = nxflat_addrenv_select(loadinfo); if (ret < 0) { berr("ERROR: nxflat_addrenv_select() failed: %d\n", ret); return ret; } #endif /* Verify that this module requires imported symbols */ if (offset != 0 && nimports > 0) { /* It does.. make sure that exported symbols are provided */ DEBUGASSERT(exports && nexports > 0); /* If non-zero, the value of the imported symbol list that we get * from the header is a file offset. We will have to convert this * to an offset into the DSpace segment to get the pointer to the * beginning of the imported symbol list. */ DEBUGASSERT(offset >= loadinfo->isize && offset < loadinfo->isize + loadinfo->dsize); imports = (FAR struct nxflat_import_s *) (offset - loadinfo->isize + loadinfo->dspace->region); /* Now, traverse the list of imported symbols and attempt to bind * each symbol to the value exported by from the exported symbol * table. */ for (i = 0; i < nimports; i++) { binfo("Import[%d] (%p) " "offset: %08" PRIx32 " func: %08" PRIx32 "\n", i, &imports[i], imports[i].i_funcname, imports[i].i_funcaddress); /* Get a pointer to the imported symbol name. The name itself * lies in the TEXT segment. But the reference to the name * lies in DATA segment. Therefore, the name reference should * have been relocated when the module was loaded. */ offset = imports[i].i_funcname; DEBUGASSERT(offset < loadinfo->isize); symname = (FAR char *) (offset + loadinfo->ispace + sizeof(struct nxflat_hdr_s)); /* Find the exported symbol value for this symbol name. */ symbol = symtab_findbyname(exports, symname, nexports); if (!symbol) { berr("Exported symbol \"%s\" not found\n", symname); #ifdef CONFIG_ARCH_ADDRENV nxflat_addrenv_restore(loadinfo); #endif return -ENOENT; } /* And put this into the module's import structure. */ imports[i].i_funcaddress = (uint32_t)symbol->sym_value; binfo("Bound import[%d] (%p) to export '%s' (%08" PRIx32 ")\n", i, &imports[i], symname, imports[i].i_funcaddress); } } /* Dump the relocation import table */ #ifdef CONFIG_NXFLAT_DUMPBUFFER if (nimports > 0) { nxflat_dumpbuffer("Imports", (FAR const uint8_t *)imports, nimports * sizeof(struct nxflat_import_s)); } #endif /* Restore the original address environment */ #ifdef CONFIG_ARCH_ADDRENV ret = nxflat_addrenv_restore(loadinfo); if (ret < 0) { berr("ERROR: nxflat_addrenv_restore() failed: %d\n", ret); } return ret; #else return OK; #endif } /**************************************************************************** * Name: nxflat_clearbss * * Description: * Clear uninitialized .bss memory * * Returned Value: * 0 (OK) is returned on success and a negated errno is returned on * failure. * ****************************************************************************/ static inline int nxflat_clearbss(FAR struct nxflat_loadinfo_s *loadinfo) { #ifdef CONFIG_ARCH_ADDRENV int ret; #endif /* .bss resides within the D-Space allocation. If CONFIG_ARCH_ADDRENV=y, * then that D-Space allocation lies in an address environment that may * not be in place. So, in that case, we must call nxflat_addrenv_select * to temporarily instantiate that address space before the .bss can be * accessed. */ #ifdef CONFIG_ARCH_ADDRENV ret = nxflat_addrenv_select(loadinfo); if (ret < 0) { berr("ERROR: nxflat_addrenv_select() failed: %d\n", ret); return ret; } #endif /* Zero the BSS area */ memset((FAR void *)(loadinfo->dspace->region + loadinfo->datasize), 0, loadinfo->bsssize); /* Restore the original address environment */ #ifdef CONFIG_ARCH_ADDRENV ret = nxflat_addrenv_restore(loadinfo); if (ret < 0) { berr("ERROR: nxflat_addrenv_restore() failed: %d\n", ret); } return ret; #else return OK; #endif } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxflat_bind * * Description: * Bind the imported symbol names in the loaded module described by * 'loadinfo' using the exported symbol values provided by 'symtab'. * After binding the module, clear the BSS region (which held the * relocation data) in preparation for execution. * * Returned Value: * 0 (OK) is returned on success and a negated errno is returned on * failure. * ****************************************************************************/ int nxflat_bind(FAR struct nxflat_loadinfo_s *loadinfo, FAR const struct symtab_s *exports, int nexports) { /* Bind the imported symbol, absolute relocations separately. This is done * before the standard relocations because that logic may modify the * import list (for the better hopefully, but we don't want to depend on * it). */ int ret = nxflat_bindimports(loadinfo, exports, nexports); if (ret == OK) { /* Then bind all GOT relocations */ ret = nxflat_gotrelocs(loadinfo); if (ret == OK) { /* Zero the BSS area, trashing the relocations that lived in that * space in the loaded file. */ ret = nxflat_clearbss(loadinfo); } } return ret; }