=========== NXP S32K3XX =========== The `S32K3XX series `_ is a family of automotive-grade general-purpose microcontrollers from NXP Semiconductors. The chips are based around single, dual (lock-step) or tripple Arm Cortex-M7 cores, running at clockspeeds up to 240 MHz. Supported MCUs ============== The following list includes MCUs from the S32K3XX series and indicates whether they are supported in NuttX: ======== ======= ================= ========= MCU Support Cores Frequency ======== ======= ================= ========= S32K311 No 1x Cortex-M7 120 MHz S32K312 No 1x Cortex-M7 120 MHz S32K314 Yes* 1x Cortex-M7 160 MHz S32K322 No 2x Cortex-M7 160 MHz S32K324 Yes* 2x Cortex-M7 160 MHz S32K341 No LS Cortex-M7 160 MHz S32K342 No LS Cortex-M7 160 MHz S32K344 Yes* LS Cortex-M7 160 MHz S32K328 No 2x Cortex-M7 160 MHz S32K338 No 3x Cortex-M7 240 MHz S32K348 No LS Cortex-M7 160 MHz S32K358 No LS + 1x Cortex-M7 160 MHz ======== ======= ================= ========= | \* Same silicon in different configurations. Only a single core is currently being used (no SMP support). Supported Modules & Peripherals =============================== The following list indicates modules and peripherals supported in NuttX. Note that this list does not include all MCU modules. Please refer to the S32K3XX Reference Manual for a complete overview of its features. ========== ======= ========================== Peripheral Support Comments ========== ======= ========================== ADC No eDMA Partial eMIOS No EMAC Yes FlexCAN Yes SocketCAN-compatible FlexIO No GPIO Yes LPCMP No LPI2C Yes I2C Master only LPSPI Yes LPUART Yes QSPI Yes RTC No SAI No ========== ======= ========================== ADC --- 12-Bit Successive Approximation (SAR) Analog-to-Digital Converter (ADC). No driver support (yet). eDMA ---- Enhanced Direct Memory Access module. There is a driver that was copied from the S32K1XX and i.MX RT ports. Some modifications have been made to make it work with S32K3XX, but it is far from feature-complete. eMIOS ----- The Enhanced Modular IO Subsystem (eMIOS) is a flexible timer and I/O module for real-time control applications. Its channels can be used for (pulse) counters, PWM outputs, input period measurements, and more. There is no driver implementation available (yet). EMAC ---- 10/100/200 Mbit/s Ethernet MAC. Driver is available. FlexCAN ------- The S32K3XX family has up to 8x FlexCAN modules with CAN FD support. A SocketCAN-compatible driver is available. FlexIO ------ A configurable module providing a range of functionality like emulation of a variety of serial/parallel communication protocols, flexible 16-bit timers or programmable logic blocks. No driver available. GPIO ---- Pins can be configured using :c:func:`s32k3xx_pinconfig` function. Writing to pins is done by :c:func:`s32k3xx_gpiowrite` function and reading is done by :c:func:`s32k3xx_gpioread`. LPCMP --- Analog Comparator. No driver support (yet). LPI2C ----- Low-Power Inter-Integrated Circuit (I2C) module supporting an interface to an I2C bus as master and/or as a slave. The lower-half of this driver is initialize by calling :c:func:`s32k3xx_i2cbus_initialize`. LPSPI ----- Low-Power Serial Peripheral Interface (SPI) module that supports an interface to an SPI bus as a master and/or a slave. The lower-half of this driver is initialize by calling :c:func:`s32k3xx_lpspibus_initialize`. LPUART ------ Low-Power Universal Asynchronous Receiver/Transmitter (UART) module. UART is initialized automatically during MCU boot. QSPI ---- QuadSPI memory interface for external serial flash devices. A basic driver is available. RTC --- Real-Time Clock module. A driver is not (yet) available. SAI --- Synchronous Audio Interface for digital audio over I2S (Inter-IC Sound). No driver implemented. Supported Boards ================ .. toctree:: :glob: :maxdepth: 1 boards/*/*