/**************************************************************************** * wireless/bluetooth/bt_hcicore.c * * Copyright (c) 2016, Intel Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * 3. Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "bt_queue.h" #include "bt_buf.h" #include "bt_keys.h" #include "bt_conn.h" #include "bt_l2cap.h" #include "bt_hcicore.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) /* Wait up to 2.5 seconds for a response. This delay is arbitrary and * intended only to avoid hangs while waiting for a response. It may need * to be adjusted. */ #define TIMEOUT_MSEC 2500 /**************************************************************************** * Public Data ****************************************************************************/ /* State of connected HCI device. * * NOTE: Because this is a global singleton, multiple HCI devices may not * be supported. */ struct bt_dev_s g_btdev; /**************************************************************************** * Private Data ****************************************************************************/ #ifdef CONFIG_WIRELESS_BLUETOOTH_HOST static FAR struct bt_conn_cb_s *g_callback_list; static bt_le_scan_cb_t *g_scan_dev_found_cb; #else static struct bt_hci_cb_s *g_hci_cb; #endif /* Lists of pending received messages. One for low priority input that is * processed on the low priority work queue and one for high priority * input that is processed on high priority work queue. */ static FAR struct bt_bufferlist_s g_lp_rxlist; static FAR struct bt_bufferlist_s g_hp_rxlist; /* Work structures: One for high priority and one for low priority work */ static struct work_s g_lp_work; static struct work_s g_hp_work; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: bt_enqueue_bufwork * * Description: * Add the provided buffer 'buf' to the head selected buffer list 'list' * * Input Parameters: * list - The buffer list to use * buf - The buffer to be added to the head of the buffer list * * Returned Value: * ****************************************************************************/ static void bt_enqueue_bufwork(FAR struct bt_bufferlist_s *list, FAR struct bt_buf_s *buf) { irqstate_t flags; flags = spin_lock_irqsave(NULL); buf->flink = list->head; if (list->head == NULL) { list->tail = buf; } list->head = buf; spin_unlock_irqrestore(NULL, flags); } /**************************************************************************** * Name: bt_dequeue_bufwork * * Description: * Remove and return the buffer at the tail of the buffer list specified * by 'list'. * * Input Parameters: * list - The buffer list to use * * Returned Value: * A pointer to the buffer that was at the tail of the buffer list. NULL * is returned if the list was empty. * ****************************************************************************/ static FAR struct bt_buf_s * bt_dequeue_bufwork(FAR struct bt_bufferlist_s *list) { FAR struct bt_buf_s *buf; irqstate_t flags; flags = spin_lock_irqsave(NULL); buf = list->tail; if (buf != NULL) { if (list->head == list->tail) { list->head = NULL; list->tail = NULL; } else { FAR struct bt_buf_s *prev; for (prev = list->head; prev && prev->flink != buf; prev = prev->flink) { } if (prev != NULL) { prev->flink = NULL; list->tail = prev; } } buf->flink = NULL; } spin_unlock_irqrestore(NULL, flags); return buf; } #ifdef CONFIG_WIRELESS_BLUETOOTH_HOST static void bt_connected(FAR struct bt_conn_s *conn) { FAR struct bt_conn_cb_s *cb; for (cb = g_callback_list; cb; cb = cb->flink) { if (cb->connected) { cb->connected(conn, cb->context); } } } static void bt_disconnected(FAR struct bt_conn_s *conn) { FAR struct bt_conn_cb_s *cb; for (cb = g_callback_list; cb; cb = cb->flink) { if (cb->disconnected) { cb->disconnected(conn, cb->context); } } } static void hci_acl(FAR struct bt_buf_s *buf) { FAR struct bt_hci_acl_hdr_s *hdr = (FAR void *)buf->data; FAR struct bt_conn_s *conn; uint16_t handle; uint16_t len = BT_LE162HOST(hdr->len); uint8_t flags; wlinfo("buf %p\n", buf); handle = BT_LE162HOST(hdr->handle); flags = (handle >> 12); buf->u.acl.handle = bt_acl_handle(handle); bt_buf_consume(buf, sizeof(*hdr)); wlinfo("handle %u len %u flags %u\n", buf->u.acl.handle, len, flags); if (buf->len != len) { wlerr("ERROR: ACL data length mismatch (%u != %u)\n", buf->len, len); bt_buf_release(buf); return; } conn = bt_conn_lookup_handle(buf->u.acl.handle); if (!conn) { wlerr("ERROR: Unable to find conn for handle %u\n", buf->u.acl.handle); bt_buf_release(buf); return; } bt_conn_receive(conn, buf, flags); bt_conn_release(conn); } /* HCI event processing */ static void hci_encrypt_change(FAR struct bt_buf_s *buf) { FAR struct bt_hci_evt_encrypt_change_s *evt = (FAR void *)buf->data; FAR struct bt_conn_s *conn; uint16_t handle = BT_LE162HOST(evt->handle); wlinfo("status %u handle %u encrypt 0x%02x\n", evt->status, handle, evt->encrypt); if (evt->status) { return; } conn = bt_conn_lookup_handle(handle); if (!conn) { wlerr("ERROR: Unable to look up conn with handle %u\n", handle); return; } conn->encrypt = evt->encrypt; bt_l2cap_encrypt_change(conn); bt_conn_release(conn); } static void hci_reset_complete(FAR struct bt_buf_s *buf) { uint8_t status = buf->data[0]; wlinfo("status %u\n", status); if (status) { return; } g_scan_dev_found_cb = NULL; g_btdev.scan_enable = BT_LE_SCAN_DISABLE; g_btdev.scan_filter = BT_LE_SCAN_FILTER_DUP_ENABLE; } static void hci_cmd_done(uint16_t opcode, uint8_t status, FAR struct bt_buf_s *buf) { FAR struct bt_buf_s *sent = g_btdev.sent_cmd; if (sent == NULL) { return; } if (g_btdev.sent_cmd == NULL) { wlerr("ERROR: Request cmd missing!\n"); return; } if (g_btdev.sent_cmd->u.hci.opcode != opcode) { wlerr("ERROR: Unexpected completion of opcode 0x%04x " \ "expected 0x%04x\n", opcode, g_btdev.sent_cmd->u.hci.opcode); return; } g_btdev.sent_cmd = NULL; /* If the command was synchronous wake up bt_hci_cmd_send_sync() */ if (sent->u.hci.sync != NULL) { FAR sem_t *sem = sent->u.hci.sync; if (status != 0) { wlwarn("WARNING: status %u\n", status); sent->u.hci.sync = NULL; } else { sent->u.hci.sync = bt_buf_addref(buf); } nxsem_post(sem); } bt_buf_release(sent); } static void hci_cmd_complete(FAR struct bt_buf_s *buf) { FAR struct hci_evt_cmd_complete_s *evt = (FAR void *)buf->data; uint16_t opcode = BT_LE162HOST(evt->opcode); FAR uint8_t *status; wlinfo("opcode %04x\n", opcode); bt_buf_consume(buf, sizeof(*evt)); /* All command return parameters have a 1-byte status in the beginning, so * we can safely make this generalization. */ status = buf->data; switch (opcode) { case BT_HCI_OP_RESET: hci_reset_complete(buf); break; default: wlinfo("Unhandled opcode %04x\n", opcode); break; } hci_cmd_done(opcode, *status, buf); if (evt->ncmd > 0 && g_btdev.ncmd == 0) { /* Allow next command to be sent */ g_btdev.ncmd = 1; nxsem_post(&g_btdev.ncmd_sem); } } static void hci_cmd_status(FAR struct bt_buf_s *buf) { FAR struct bt_hci_evt_cmd_status_s *evt = (FAR void *)buf->data; uint16_t opcode = BT_LE162HOST(evt->opcode); wlinfo("opcode %04x\n", opcode); bt_buf_consume(buf, sizeof(*evt)); switch (opcode) { default: wlinfo("Unhandled opcode %04x\n", opcode); break; } hci_cmd_done(opcode, evt->status, buf); if (evt->ncmd && !g_btdev.ncmd) { /* Allow next command to be sent */ g_btdev.ncmd = 1; nxsem_post(&g_btdev.ncmd_sem); } } static void hci_num_completed_packets(FAR struct bt_buf_s *buf) { FAR struct bt_hci_evt_num_completed_packets_s *evt = (FAR void *)buf->data; uint16_t num_handles = BT_LE162HOST(evt->num_handles); uint16_t i; wlinfo("num_handles %u\n", num_handles); for (i = 0; i < num_handles; i++) { uint16_t handle; uint16_t count; handle = BT_LE162HOST(evt->h[i].handle); count = BT_LE162HOST(evt->h[i].count); wlinfo("handle %u count %u\n", handle, count); UNUSED(handle); while (count--) { nxsem_post(&g_btdev.le_pkts_sem); } } } static void hci_encrypt_key_refresh_complete(FAR struct bt_buf_s *buf) { FAR struct bt_hci_evt_encrypt_key_refresh_complete_s *evt = (FAR void *)buf->data; FAR struct bt_conn_s *conn; uint16_t handle; handle = BT_LE162HOST(evt->handle); wlinfo("status %u handle %u\n", evt->status, handle); if (evt->status) { return; } conn = bt_conn_lookup_handle(handle); if (!conn) { wlerr("ERROR: Unable to look up conn with handle %u\n", handle); return; } bt_l2cap_encrypt_change(conn); bt_conn_release(conn); } static void copy_id_addr(FAR struct bt_conn_s *conn, FAR const bt_addr_le_t *addr) { FAR struct bt_keys_s *keys; /* If we have a keys struct we already know the identity */ if (conn->keys) { return; } keys = bt_keys_find_irk(addr); if (keys) { bt_addr_le_copy(&conn->dst, &keys->addr); conn->keys = keys; } else { bt_addr_le_copy(&conn->dst, addr); } } static int bt_hci_start_scanning(uint8_t scan_type, uint8_t scan_filter) { FAR struct bt_buf_s *buf; FAR struct bt_buf_s *rsp; FAR struct bt_hci_cp_le_set_scan_params_s *set_param; FAR struct bt_hci_cp_le_set_scan_enable_s *scan_enable; int ret; buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_SCAN_PARAMS, sizeof(*set_param)); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } set_param = bt_buf_extend(buf, sizeof(*set_param)); memset(set_param, 0, sizeof(*set_param)); set_param->scan_type = scan_type; /* for the rest parameters apply default values according to spec 4.2, * vol2, part E, 7.8.10 */ set_param->interval = BT_HOST2LE16(0x0010); set_param->window = BT_HOST2LE16(0x0010); set_param->filter_policy = 0x00; set_param->addr_type = 0x00; bt_hci_cmd_send(BT_HCI_OP_LE_SET_SCAN_PARAMS, buf); buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_SCAN_ENABLE, sizeof(*scan_enable)); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } scan_enable = bt_buf_extend(buf, sizeof(*scan_enable)); memset(scan_enable, 0, sizeof(*scan_enable)); scan_enable->filter_dup = scan_filter; scan_enable->enable = BT_LE_SCAN_ENABLE; ret = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_SCAN_ENABLE, buf, &rsp); if (ret < 0) { wlerr("ERROR: bt_hci_cmd_send_sync failed: %d\n", ret); return ret; } /* Update scan state in case of success (0) status */ ret = rsp->data[0]; if (!ret) { g_btdev.scan_enable = BT_LE_SCAN_ENABLE; } bt_buf_release(rsp); return ret; } static int bt_hci_stop_scanning(void) { FAR struct bt_buf_s *buf; FAR struct bt_buf_s *rsp; FAR struct bt_hci_cp_le_set_scan_enable_s *scan_enable; int ret; if (g_btdev.scan_enable == BT_LE_SCAN_DISABLE) { wlwarn("WARNING: Scan already disabled\n"); return -EALREADY; } buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_SCAN_ENABLE, sizeof(*scan_enable)); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } scan_enable = bt_buf_extend(buf, sizeof(*scan_enable)); memset(scan_enable, 0x0, sizeof(*scan_enable)); scan_enable->filter_dup = 0x00; scan_enable->enable = BT_LE_SCAN_DISABLE; ret = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_SCAN_ENABLE, buf, &rsp); if (ret < 0) { wlerr("ERROR: bt_hci_cmd_send_sync failed: %d\n", ret); return ret; } /* Update scan state in case of success (0) status */ ret = rsp->data[0]; if (!ret) { g_btdev.scan_enable = BT_LE_SCAN_DISABLE; } bt_buf_release(rsp); return ret; } static int hci_le_create_conn(FAR const bt_addr_le_t *addr) { FAR struct bt_buf_s *buf; FAR struct bt_hci_cp_le_create_conn_s *cp; buf = bt_hci_cmd_create(BT_HCI_OP_LE_CREATE_CONN, sizeof(*cp)); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } cp = bt_buf_extend(buf, sizeof(*cp)); memset(cp, 0x0, sizeof(*cp)); bt_addr_le_copy(&cp->peer_addr, addr); cp->conn_interval_max = BT_HOST2LE16(0x0028); cp->conn_interval_min = BT_HOST2LE16(0x0018); cp->scan_interval = BT_HOST2LE16(0x0060); cp->scan_window = BT_HOST2LE16(0x0030); cp->supervision_timeout = BT_HOST2LE16(0x07d0); return bt_hci_cmd_send_sync(BT_HCI_OP_LE_CREATE_CONN, buf, NULL); } static void hci_disconn_complete(FAR struct bt_buf_s *buf) { FAR struct bt_hci_evt_disconn_complete_s *evt = (FAR void *)buf->data; uint16_t handle = BT_LE162HOST(evt->handle); FAR struct bt_conn_s *conn; wlinfo("status %u handle %u reason %u\n", evt->status, handle, evt->reason); if (evt->status) { return; } conn = bt_conn_lookup_handle(handle); if (!conn) { wlerr("ERROR: Unable to look up conn with handle %u\n", handle); return; } bt_l2cap_disconnected(conn); bt_disconnected(conn); bt_conn_set_state(conn, BT_CONN_DISCONNECTED); conn->handle = 0; if (bt_atomic_testbit(conn->flags, BT_CONN_AUTO_CONNECT)) { bt_conn_set_state(conn, BT_CONN_CONNECT_SCAN); bt_le_scan_update(); } bt_conn_release(conn); if (g_btdev.adv_enable) { buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_ADV_ENABLE, 1); if (buf) { memcpy(bt_buf_extend(buf, 1), &g_btdev.adv_enable, 1); bt_hci_cmd_send(BT_HCI_OP_LE_SET_ADV_ENABLE, buf); } } } static void le_conn_complete(FAR struct bt_buf_s *buf) { FAR struct bt_hci_evt_le_conn_complete_s *evt = (FAR void *)buf->data; uint16_t handle = BT_LE162HOST(evt->handle); FAR struct bt_conn_s *conn; FAR struct bt_keys_s *keys; wlinfo("status %u handle %u role %u %s\n", evt->status, handle, evt->role, bt_addr_le_str(&evt->peer_addr)); /* Make lookup to check if there's a connection object in CONNECT state * associated with passed peer LE address. */ keys = bt_keys_find_irk(&evt->peer_addr); if (keys) { conn = bt_conn_lookup_state(&keys->addr, BT_CONN_CONNECT); } else { conn = bt_conn_lookup_state(&evt->peer_addr, BT_CONN_CONNECT); } if (evt->status) { if (!conn) { return; } bt_conn_set_state(conn, BT_CONN_DISCONNECTED); /* Drop the reference got by lookup call in CONNECT state. We are now * in the DISCONNECTED state since no successful LE link been made. */ bt_conn_release(conn); return; } if (!conn) { conn = bt_conn_add(&evt->peer_addr, evt->role); } if (!conn) { wlerr("ERROR: Unable to add new conn for handle %u\n", handle); return; } conn->handle = handle; conn->src.type = BT_ADDR_LE_PUBLIC; memcpy(conn->src.val, g_btdev.bdaddr.val, sizeof(g_btdev.bdaddr.val)); copy_id_addr(conn, &evt->peer_addr); conn->le_conn_interval = BT_LE162HOST(evt->interval); bt_conn_set_state(conn, BT_CONN_CONNECTED); bt_l2cap_connected(conn); if (evt->role == BT_HCI_ROLE_SLAVE) { bt_l2cap_update_conn_param(conn); } bt_connected(conn); bt_conn_release(conn); bt_le_scan_update(); } static void check_pending_conn(FAR const bt_addr_le_t *addr, uint8_t evtype, FAR struct bt_keys_s *keys) { FAR struct bt_conn_s *conn; /* Return if event is not connectible */ if (evtype != BT_LE_ADV_IND && evtype != BT_LE_ADV_DIRECT_IND) { return; } if (keys) { conn = bt_conn_lookup_state(&keys->addr, BT_CONN_CONNECT_SCAN); } else { conn = bt_conn_lookup_state(addr, BT_CONN_CONNECT_SCAN); } if (!conn) { return; } if (bt_hci_stop_scanning()) { goto done; } if (hci_le_create_conn(addr)) { goto done; } bt_conn_set_state(conn, BT_CONN_CONNECT); done: bt_conn_release(conn); } static void le_adv_report(FAR struct bt_buf_s *buf) { FAR struct bt_hci_ev_le_advertising_report_s *info; uint8_t num_reports = buf->data[0]; wlinfo("Adv number of reports %u\n", num_reports); info = bt_buf_consume(buf, sizeof(num_reports)); while (num_reports--) { int8_t rssi = info->data[info->length]; FAR struct bt_keys_s *keys; bt_addr_le_t addr; wlinfo("%s event %u, len %u, rssi %d dBm\n", bt_addr_le_str(&info->addr), info->evt_type, info->length, rssi); keys = bt_keys_find_irk(&info->addr); if (keys) { bt_addr_le_copy(&addr, &keys->addr); wlinfo("Identity %s matched RPA %s\n", bt_addr_le_str(&keys->addr), bt_addr_le_str(&info->addr)); } else { bt_addr_le_copy(&addr, &info->addr); } if (g_scan_dev_found_cb) { g_scan_dev_found_cb(&addr, rssi, info->evt_type, info->data, info->length); } check_pending_conn(&info->addr, info->evt_type, keys); /* Get next report iteration by moving pointer to right offset in buf * according to spec 4.2, Vol 2, Part E, 7.7.65.2. * * TODO: multiple reports are stored as multiple arrays not one array * of structs. If num_reports > 0 this will not WORK! */ /* Note that info already contains one byte which accounts for RSSI */ info = bt_buf_consume(buf, sizeof(*info) + info->length); } } static void le_ltk_request(FAR struct bt_buf_s *buf) { FAR struct bt_hci_evt_le_ltk_request_s *evt = (FAR void *)buf->data; FAR struct bt_conn_s *conn; uint16_t handle; handle = BT_LE162HOST(evt->handle); wlinfo("handle %u\n", handle); conn = bt_conn_lookup_handle(handle); if (!conn) { wlerr("ERROR: Unable to lookup conn for handle %u\n", handle); return; } if (!conn->keys) { conn->keys = bt_keys_find(BT_KEYS_SLAVE_LTK, &conn->dst); } if (conn->keys && (conn->keys->keys & BT_KEYS_SLAVE_LTK) && conn->keys->slave_ltk.rand == evt->rand && conn->keys->slave_ltk.ediv == evt->ediv) { FAR struct bt_hci_cp_le_ltk_req_reply_s *cp; buf = bt_hci_cmd_create(BT_HCI_OP_LE_LTK_REQ_REPLY, sizeof(*cp)); if (!buf) { wlerr("ERROR: Out of command buffers\n"); goto done; } cp = bt_buf_extend(buf, sizeof(*cp)); cp->handle = evt->handle; memcpy(cp->ltk, conn->keys->slave_ltk.val, 16); bt_hci_cmd_send(BT_HCI_OP_LE_LTK_REQ_REPLY, buf); } else { FAR struct bt_hci_cp_le_ltk_req_neg_reply_s *cp; buf = bt_hci_cmd_create(BT_HCI_OP_LE_LTK_REQ_NEG_REPLY, sizeof(*cp)); if (!buf) { wlerr("ERROR: Out of command buffers\n"); goto done; } cp = bt_buf_extend(buf, sizeof(*cp)); cp->handle = evt->handle; bt_hci_cmd_send(BT_HCI_OP_LE_LTK_REQ_NEG_REPLY, buf); } done: bt_conn_release(conn); } static void hci_le_meta_event(FAR struct bt_buf_s *buf) { FAR struct bt_hci_evt_le_meta_event_s *evt = (FAR void *)buf->data; bt_buf_consume(buf, sizeof(*evt)); switch (evt->subevent) { case BT_HCI_EVT_LE_CONN_COMPLETE: le_conn_complete(buf); break; case BT_HCI_EVT_LE_ADVERTISING_REPORT: le_adv_report(buf); break; case BT_HCI_EVT_LE_LTK_REQUEST: le_ltk_request(buf); break; default: wlinfo("Unhandled LE event %04x\n", evt->subevent); break; } } static void hci_event(FAR struct bt_buf_s *buf) { FAR struct bt_hci_evt_hdr_s *hdr = (FAR void *)buf->data; wlinfo("event %u\n", hdr->evt); bt_buf_consume(buf, sizeof(struct bt_hci_evt_hdr_s)); switch (hdr->evt) { case BT_HCI_EVT_DISCONN_COMPLETE: hci_disconn_complete(buf); break; case BT_HCI_EVT_ENCRYPT_CHANGE: hci_encrypt_change(buf); break; case BT_HCI_EVT_ENCRYPT_KEY_REFRESH_COMPLETE: hci_encrypt_key_refresh_complete(buf); break; case BT_HCI_EVT_LE_META_EVENT: hci_le_meta_event(buf); break; default: wlwarn("WARNING: Unhandled event 0x%02x\n", hdr->evt); break; } bt_buf_release(buf); } #endif /**************************************************************************** * Name: hci_tx_kthread * * Description: * This is a kernel thread that handles sending of commands. * * Input Parameters: * Standard kernel thread arguments * * Returned Value: * Doesn't normally return. * ****************************************************************************/ static int hci_tx_kthread(int argc, FAR char *argv[]) { FAR struct bt_driver_s *btdev = g_btdev.btdev; int ret; wlinfo("started\n"); for (; ; ) { FAR struct bt_buf_s *buf; /* Wait until ncmd > 0 */ ret = nxsem_wait_uninterruptible(&g_btdev.ncmd_sem); if (ret < 0) { wlerr("nxsem_wait_uninterruptible() failed: %d\n", ret); return EXIT_FAILURE; } /* Get next command - wait if necessary */ buf = NULL; ret = bt_queue_receive(&g_btdev.tx_queue, &buf); DEBUGASSERT(ret >= 0 && buf != NULL); UNUSED(ret); g_btdev.ncmd = 0; /* Clear out any existing sent command */ if (g_btdev.sent_cmd) { wlerr("ERROR: Uncleared pending sent_cmd\n"); bt_buf_release(g_btdev.sent_cmd); g_btdev.sent_cmd = NULL; } g_btdev.sent_cmd = bt_buf_addref(buf); wlinfo("Sending command %04x buf %p to driver\n", buf->u.hci.opcode, buf); bt_send(btdev, buf); bt_buf_release(buf); } return EXIT_SUCCESS; /* Can't get here */ } /**************************************************************************** * Name: hci_rx_work * * Description: * This work function operates on the low priority work queue using the * low priority buffer queue. * * Input Parameters: * arg - Indicates which buffer queue should be used * * Returned Value: * None * ****************************************************************************/ static void hci_rx_work(FAR void *arg) { FAR struct bt_bufferlist_s *list = (FAR struct bt_bufferlist_s *)arg; FAR struct bt_buf_s *buf; wlinfo("list %p\n", list); DEBUGASSERT(list != NULL); while ((buf = bt_dequeue_bufwork(list)) != NULL) { wlinfo("buf %p type %u len %u\n", buf, buf->type, buf->len); /* TODO: Hook monitor callback */ #ifdef CONFIG_WIRELESS_BLUETOOTH_HOST switch (buf->type) { case BT_ACL_IN: hci_acl(buf); break; case BT_EVT: hci_event(buf); break; default: wlerr("ERROR: Unknown buf type %u\n", buf->type); bt_buf_release(buf); break; } #else g_hci_cb->received(buf, g_hci_cb->context); #endif bt_buf_release(buf); } } /**************************************************************************** * Name: priority_rx_work * * Description: * This work function operates on the high priority work thread using the * high priority buffer queue. * * Input Parameters: * arg - Indicates which buffer queue should be used * * Returned Value: * None * ****************************************************************************/ static void priority_rx_work(FAR void *arg) { FAR struct bt_bufferlist_s *list = (FAR struct bt_bufferlist_s *)arg; FAR struct bt_buf_s *buf; wlinfo("list %p\n", list); DEBUGASSERT(list != NULL); while ((buf = bt_dequeue_bufwork(list)) != NULL) { FAR struct bt_hci_evt_hdr_s *hdr = (FAR void *)buf->data; wlinfo("buf %p type %u len %u\n", buf, buf->type, buf->len); /* TODO: Hook monitor callback */ if (buf->type != BT_EVT) { wlerr("Unknown buf type %u\n", buf->type); bt_buf_release(buf); continue; } #ifdef CONFIG_WIRELESS_BLUETOOTH_HOST bt_buf_consume(buf, sizeof(struct bt_hci_evt_hdr_s)); switch (hdr->evt) { case BT_HCI_EVT_CMD_COMPLETE: hci_cmd_complete(buf); break; case BT_HCI_EVT_CMD_STATUS: hci_cmd_status(buf); break; case BT_HCI_EVT_NUM_COMPLETED_PACKETS: hci_num_completed_packets(buf); break; default: wlerr("Unknown event 0x%02x\n", hdr->evt); break; } #else UNUSED(hdr); g_hci_cb->received(buf, g_hci_cb->context); #endif bt_buf_release(buf); } } #ifdef CONFIG_WIRELESS_BLUETOOTH_HOST static void read_local_features_complete(FAR struct bt_buf_s *buf) { FAR struct bt_hci_rp_read_local_features_s *rp = (FAR void *)buf->data; wlinfo("status %u\n", rp->status); memcpy(g_btdev.features, rp->features, sizeof(g_btdev.features)); } static void read_local_ver_complete(FAR struct bt_buf_s *buf) { FAR struct bt_hci_rp_read_local_version_info_s *rp = (FAR void *)buf->data; wlinfo("status %u\n", rp->status); g_btdev.hci_version = rp->hci_version; g_btdev.hci_revision = BT_LE162HOST(rp->hci_revision); g_btdev.manufacturer = BT_LE162HOST(rp->manufacturer); } static void read_bdaddr_complete(FAR struct bt_buf_s *buf) { FAR struct bt_hci_rp_read_bd_addr_s *rp = (FAR void *)buf->data; wlinfo("status %u\n", rp->status); bt_addr_copy(&g_btdev.bdaddr, &rp->bdaddr); } static void read_le_features_complete(FAR struct bt_buf_s *buf) { FAR struct bt_hci_rp_le_read_local_features_s *rp = (FAR void *)buf->data; wlinfo("status %u\n", rp->status); memcpy(g_btdev.le_features, rp->features, sizeof(g_btdev.le_features)); } static void read_buffer_size_complete(FAR struct bt_buf_s *buf) { FAR struct bt_hci_rp_read_buffer_size_s *rp = (FAR void *)buf->data; wlinfo("status %u\n", rp->status); /* If LE-side has buffers we can ignore the BR/EDR values */ if (g_btdev.le_mtu) { return; } g_btdev.le_mtu = BT_LE162HOST(rp->acl_max_len); g_btdev.le_pkts = BT_LE162HOST(rp->acl_max_num); } static void le_read_buffer_size_complete(FAR struct bt_buf_s *buf) { FAR struct bt_hci_rp_le_read_buffer_size_s *rp = (FAR void *)buf->data; wlinfo("status %u\n", rp->status); g_btdev.le_mtu = BT_LE162HOST(rp->le_max_len); g_btdev.le_pkts = rp->le_max_num; } /**************************************************************************** * Name: hci_initialize() * * Description: * * Input Parameters: * none * * Returned Value: * None * ****************************************************************************/ static int hci_initialize(void) { FAR struct bt_hci_cp_host_buffer_size_s *hbs; FAR struct bt_hci_cp_set_event_mask_s *ev; FAR struct bt_buf_s *buf; FAR struct bt_buf_s *rsp; FAR uint8_t *enable; int ret; /* Send HCI_RESET */ ret = bt_hci_cmd_send_sync(BT_HCI_OP_RESET, NULL, &rsp); if (ret < 0) { wlerr("ERROR: BT_HCI_OP_RESET failed: %d\n", ret); return ret; } bt_buf_release(rsp); /* Read Local Supported Features */ ret = bt_hci_cmd_send_sync(BT_HCI_OP_READ_LOCAL_FEATURES, NULL, &rsp); if (ret < 0) { wlerr("ERROR: BT_HCI_OP_READ_LOCAL_FEATURES failed: %d\n", ret); return ret; } read_local_features_complete(rsp); bt_buf_release(rsp); /* Read Local Version Information */ ret = bt_hci_cmd_send_sync(BT_HCI_OP_READ_LOCAL_VERSION_INFO, NULL, &rsp); if (ret < 0) { wlerr("ERROR: bt_hci_cmd_send_sync failed: %d\n", ret); return ret; } read_local_ver_complete(rsp); bt_buf_release(rsp); /* Read Bluetooth Address */ ret = bt_hci_cmd_send_sync(BT_HCI_OP_READ_BD_ADDR, NULL, &rsp); if (ret < 0) { wlerr("ERROR: bt_hci_cmd_send_sync failed: %d\n", ret); return ret; } read_bdaddr_complete(rsp); bt_buf_release(rsp); /* For now we only support LE capable controllers */ if (!lmp_le_capable(g_btdev)) { wlerr("ERROR: Non-LE capable controller detected!\n"); return -ENODEV; } /* Read Low Energy Supported Features */ ret = bt_hci_cmd_send_sync(BT_HCI_OP_LE_READ_LOCAL_FEATURES, NULL, &rsp); if (ret < 0) { wlerr("ERROR: BT_HCI_OP_LE_READ_LOCAL_FEATURES failed: %d\n", ret); return ret; } read_le_features_complete(rsp); bt_buf_release(rsp); /* Read LE Buffer Size */ ret = bt_hci_cmd_send_sync(BT_HCI_OP_LE_READ_BUFFER_SIZE, NULL, &rsp); if (ret < 0) { wlerr("ERROR: BT_HCI_OP_LE_READ_BUFFER_SIZE failed: %d\n", ret); return ret; } le_read_buffer_size_complete(rsp); bt_buf_release(rsp); buf = bt_hci_cmd_create(BT_HCI_OP_SET_EVENT_MASK, sizeof(*ev)); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } ev = bt_buf_extend(buf, sizeof(*ev)); memset(ev, 0, sizeof(*ev)); ev->events[0] |= 0x10; /* Disconnection Complete */ ev->events[1] |= 0x08; /* Read Remote Version Information Complete */ ev->events[1] |= 0x20; /* Command Complete */ ev->events[1] |= 0x40; /* Command Status */ ev->events[1] |= 0x80; /* Hardware Error */ ev->events[2] |= 0x04; /* Number of Completed Packets */ ev->events[3] |= 0x02; /* Data Buffer Overflow */ ev->events[7] |= 0x20; /* LE Meta-Event */ if (g_btdev.le_features[0] & BT_HCI_LE_ENCRYPTION) { ev->events[0] |= 0x80; /* Encryption Change */ ev->events[5] |= 0x80; /* Encryption Key Refresh Complete */ } bt_hci_cmd_send_sync(BT_HCI_OP_SET_EVENT_MASK, buf, NULL); buf = bt_hci_cmd_create(BT_HCI_OP_HOST_BUFFER_SIZE, sizeof(*hbs)); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } hbs = bt_buf_extend(buf, sizeof(*hbs)); memset(hbs, 0, sizeof(*hbs)); hbs->acl_mtu = BT_HOST2LE16(BLUETOOTH_MAX_FRAMELEN - sizeof(struct bt_hci_acl_hdr_s) - g_btdev.btdev->head_reserve); hbs->acl_pkts = BT_HOST2LE16(CONFIG_BLUETOOTH_BUFFER_PREALLOC); ret = bt_hci_cmd_send(BT_HCI_OP_HOST_BUFFER_SIZE, buf); if (ret < 0) { wlerr("ERROR: bt_hci_cmd_send failed: %d\n", ret); return ret; } buf = bt_hci_cmd_create(BT_HCI_OP_SET_CTL_TO_HOST_FLOW, 1); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } enable = bt_buf_extend(buf, sizeof(*enable)); *enable = 0x01; ret = bt_hci_cmd_send_sync(BT_HCI_OP_SET_CTL_TO_HOST_FLOW, buf, NULL); if (ret < 0) { wlerr("ERROR: bt_hci_cmd_send_sync failed: %d\n", ret); return ret; } if (lmp_bredr_capable(g_btdev)) { FAR struct bt_hci_cp_write_le_host_supp_s *cp; /* Use BR/EDR buffer size if LE reports zero buffers */ if (!g_btdev.le_mtu) { ret = bt_hci_cmd_send_sync(BT_HCI_OP_READ_BUFFER_SIZE, NULL, &rsp); if (ret < 0) { wlerr("ERROR: bt_hci_cmd_send_sync failed: %d\n", ret); return ret; } read_buffer_size_complete(rsp); bt_buf_release(rsp); } buf = bt_hci_cmd_create(BT_HCI_OP_LE_WRITE_LE_HOST_SUPP, sizeof(*cp)); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } /* Explicitly enable LE for dual-mode controllers */ cp = bt_buf_extend(buf, sizeof *cp); cp->le = 0x01; cp->simul = 0x00; bt_hci_cmd_send_sync(BT_HCI_OP_LE_WRITE_LE_HOST_SUPP, buf, NULL); } wlinfo("HCI ver %u rev %u, manufacturer %u\n", g_btdev.hci_version, g_btdev.hci_revision, g_btdev.manufacturer); wlinfo("ACL buffers: pkts %u mtu %u\n", g_btdev.le_pkts, g_btdev.le_mtu); /* Initialize & prime the semaphore for counting controller-side available * ACL packet buffers. */ nxsem_init(&g_btdev.le_pkts_sem, 0, g_btdev.le_pkts); return 0; } #endif /* threads, fifos and semaphores initialization */ static void cmd_queue_init(void) { int ret; /* When there is a command to be sent to the Bluetooth driver, it queued on * the Tx queue and received by logic on the Tx kernel thread. */ ret = bt_queue_open(BT_HCI_TX, O_RDWR | O_CREAT, CONFIG_BLUETOOTH_TXCMD_NMSGS, &g_btdev.tx_queue); DEBUGASSERT(ret >= 0); nxsem_init(&g_btdev.ncmd_sem, 0, 1); g_btdev.ncmd = 1; ret = kthread_create("BT HCI Tx", CONFIG_BLUETOOTH_TXCMD_PRIORITY, CONFIG_BLUETOOTH_TXCMD_STACKSIZE, hci_tx_kthread, NULL); DEBUGASSERT(ret > 0); UNUSED(ret); } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: bt_send * * Description: * Send the provided buffer to the bluetooth driver * * Input Parameters: * btdev - An instance of the low-level drivers interface structure. * buf - The buffer to be sent by the driver * * Returned Value: * Zero is returned on success; a negated errno value is returned on any * failure. * ****************************************************************************/ int bt_send(FAR struct bt_driver_s *btdev, FAR struct bt_buf_s *buf) { /* Send to driver */ return btdev->send(btdev, buf->type, buf->data, buf->len); } /**************************************************************************** * Name: bt_initialize * * Description: * Initialize Bluetooth. Must be the called before anything else. * * Returned Value: * Zero on success or (negative) error code otherwise. * ****************************************************************************/ int bt_initialize(void) { FAR struct bt_driver_s *btdev = g_btdev.btdev; int ret; wlinfo("btdev %p\n", btdev); DEBUGASSERT(btdev != NULL); bt_buf_initialize(); cmd_queue_init(); ret = btdev->open(btdev); if (ret < 0) { wlerr("ERROR: HCI driver open failed (%d)\n", ret); return ret; } #ifdef CONFIG_WIRELESS_BLUETOOTH_HOST ret = hci_initialize(); if (ret < 0) { wlerr("ERROR: hci_initialize failed: %d\n", ret); return ret; } ret = bt_l2cap_init(); #endif return ret; } /**************************************************************************** * Name: bt_driver_register * * Description: * Register the Bluetooth low-level driver with the Bluetooth stack. * This is called from the low-level driver and is part of the driver * interface prototyped in include/nuttx/wireless/bluetooth/bt_driver.h * * This function associates the Bluetooth driver with the Bluetooth stack. * * Input Parameters: * btdev - An instance of the low-level drivers interface structure. * * Returned Value: * Zero is returned on success; a negated errno value is returned on any * failure. * ****************************************************************************/ int bt_driver_register(FAR struct bt_driver_s *btdev) { DEBUGASSERT(btdev != NULL && btdev->open != NULL && btdev->send != NULL); if (g_btdev.btdev != NULL) { wlwarn("WARNING: Already registered\n"); return -EALREADY; } g_btdev.btdev = btdev; return 0; } /**************************************************************************** * Name: bt_driver_unregister * * Description: * Unregister a Bluetooth low-level driver previously registered with * bt_driver_register. This may be called from the low-level driver and * is part of the driver interface prototyped in * include/nuttx/wireless/bluetooth/bt_driver.h * * Input Parameters: * btdev - An instance of the low-level drivers interface structure. * * Returned Value: * None * ****************************************************************************/ void bt_driver_unregister(FAR struct bt_driver_s *btdev) { g_btdev.btdev = NULL; } /**************************************************************************** * Name: bt_receive * * Description: * Called by the Bluetooth low-level driver when new data is received from * the radio. This may be called from the low-level driver and is part of * the driver interface prototyped in * include/nuttx/wireless/bluetooth/bt_driver.h * * NOTE: This function will defer all real work to the low or to the high * priority work queues. Therefore, this function may safely be called * from interrupt handling logic. * * Input Parameters: * buf - An instance of the buffer structure providing the received frame. * * Returned Value: * None * ****************************************************************************/ int bt_receive(FAR struct bt_driver_s *btdev, enum bt_buf_type_e type, FAR void *data, size_t len) { FAR struct bt_hci_evt_hdr_s *hdr; struct bt_buf_s *buf; int ret; wlinfo("data %p len %zu\n", data, len); /* Critical command complete/status events use the high priority work * queue. */ buf = bt_buf_alloc(type, NULL, BLUETOOTH_H4_HDRLEN); if (buf == NULL) { return -ENOMEM; } memcpy(bt_buf_extend(buf, len), data, len); if (type != BT_ACL_IN) { if (type != BT_EVT) { wlerr("ERROR: Invalid buf type %u\n", buf->type); bt_buf_release(buf); return -EINVAL; } /* Command Complete/Status events use high priority messages. */ hdr = (FAR void *)buf->data; if (hdr->evt == BT_HCI_EVT_CMD_COMPLETE || hdr->evt == BT_HCI_EVT_CMD_STATUS || hdr->evt == BT_HCI_EVT_NUM_COMPLETED_PACKETS) { /* Add the buffer to the high priority Rx buffer list */ bt_enqueue_bufwork(&g_hp_rxlist, buf); /* If there is already pending work, then do nothing. Otherwise, * schedule processing of the Rx buffer list on the high priority * work queue. */ if (work_available(&g_hp_work)) { ret = work_queue(HPWORK, &g_hp_work, priority_rx_work, &g_hp_rxlist, 0); if (ret < 0) { wlerr("ERROR: Failed to schedule HPWORK: %d\n", ret); } } return OK; } } /* All others use the low priority work queue */ /* Add the buffer to the low priority Rx buffer list */ bt_enqueue_bufwork(&g_lp_rxlist, buf); /* If there is already pending work, then do nothing. Otherwise, schedule * processing of the Rx buffer list on the low priority work queue. */ if (work_available(&g_lp_work)) { ret = work_queue(LPWORK, &g_lp_work, hci_rx_work, &g_lp_rxlist, 0); if (ret < 0) { wlerr("ERROR: Failed to schedule LPWORK: %d\n", ret); } } return OK; } #ifdef CONFIG_WIRELESS_BLUETOOTH_HOST /**************************************************************************** * Name: bt_hci_cmd_create * * Description: * Allocate and initialize a buffer for a command * * Returned Value: * A reference to the allocated buffer. NULL could possibly be returned * on any failure to allocate. * ****************************************************************************/ FAR struct bt_buf_s *bt_hci_cmd_create(uint16_t opcode, uint8_t param_len) { FAR struct bt_hci_cmd_hdr_s *hdr; FAR struct bt_buf_s *buf; wlinfo("opcode %04x param_len %u\n", opcode, param_len); buf = bt_buf_alloc(BT_CMD, NULL, g_btdev.btdev->head_reserve); if (!buf) { wlerr("ERROR: Cannot get free buffer\n"); return NULL; } wlinfo("buf %p\n", buf); buf->u.hci.opcode = opcode; buf->u.hci.sync = NULL; hdr = bt_buf_extend(buf, sizeof(*hdr)); hdr->opcode = BT_HOST2LE16(opcode); hdr->param_len = param_len; return buf; } int bt_hci_cmd_send(uint16_t opcode, FAR struct bt_buf_s *buf) { int ret; if (buf == NULL) { buf = bt_hci_cmd_create(opcode, 0); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } } wlinfo("opcode %04x len %u\n", opcode, buf->len); /* Host Number of Completed Packets can ignore the ncmd value and does not * generate any cmd complete/status events. */ if (opcode == BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS) { bt_send(g_btdev.btdev, buf); bt_buf_release(buf); return 0; } ret = bt_queue_send(&g_btdev.tx_queue, buf, BT_NORMAL_PRIO); if (ret < 0) { wlerr("ERROR: bt_queue_send() failed: %d\n", ret); } return ret; } int bt_hci_cmd_send_sync(uint16_t opcode, FAR struct bt_buf_s *buf, FAR struct bt_buf_s **rsp) { sem_t sync_sem; int ret; /* NOTE: This function cannot be called from the rx thread since it relies * on the very same thread in processing the cmd_complete event and giving * back the blocking semaphore. */ if (buf == NULL) { buf = bt_hci_cmd_create(opcode, 0); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } } wlinfo("opcode %04x len %u\n", opcode, buf->len); /* Set up for the wait */ nxsem_init(&sync_sem, 0, 0); buf->u.hci.sync = &sync_sem; /* Send the frame */ ret = bt_queue_send(&g_btdev.tx_queue, buf, BT_NORMAL_PRIO); if (ret < 0) { wlerr("ERROR: bt_queue_send() failed: %d\n", ret); } else { /* Wait for the response to the command. An I/O error will be * declared if the response does not occur within the timeout * interval. * * REVISIT: The cause of the timeout could be a failure to receive a * response to a sent frame or, perhaps, a failure to send the frame. * Should there also be logic to flush any unsent Tx packets? */ ret = nxsem_tickwait_uninterruptible(&sync_sem, MSEC2TICK(TIMEOUT_MSEC)); } /* Indicate failure if we failed to get the response */ if (ret >= 0) { if (buf->u.hci.sync == NULL) { wlerr("ERROR: Failed get return parameters\n"); ret = -EIO; } else { ret = 0; } } /* Note: if ret < 0 the packet might just be delayed and could still * be sent. We cannot decrease the ref count since it if it was sent * it buf could be pointed a completely different request. */ if (rsp != NULL) { /* If the response is expected provide the sync response */ *rsp = buf->u.hci.sync; } else if (buf->u.hci.sync != NULL) { /* If a sync response was given but not requested drop it */ bt_buf_release(buf->u.hci.sync); } nxsem_destroy(&sync_sem); return ret; } /**************************************************************************** * Name: bt_start_advertising * * Description: * Set advertisement data, scan response data, advertisement parameters * and start advertising. * * Input Parameters: * type - Advertising type. * ad - Data to be used in advertisement packets. * sd - Data to be used in scan response packets. * * Returned Value: * Zero on success or (negative) error code otherwise. * ****************************************************************************/ int bt_start_advertising(uint8_t type, FAR const struct bt_eir_s *ad, FAR const struct bt_eir_s *sd) { FAR struct bt_buf_s *buf; FAR struct bt_hci_cp_le_set_adv_data_s *set_data; FAR struct bt_hci_cp_le_set_adv_data_s *scan_rsp; FAR struct bt_hci_cp_le_set_adv_parameters_s *set_param; int i; if (ad == NULL) { goto send_scan_rsp; } buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_ADV_DATA, sizeof(*set_data)); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } set_data = bt_buf_extend(buf, sizeof(*set_data)); memset(set_data, 0, sizeof(*set_data)); for (i = 0; ad[i].len > 0; i++) { /* Check if ad fit in the remaining buffer */ if (set_data->len + ad[i].len + 1 > 29) { break; } memcpy(&set_data->data[set_data->len], &ad[i], ad[i].len + 1); set_data->len += ad[i].len + 1; } bt_hci_cmd_send(BT_HCI_OP_LE_SET_ADV_DATA, buf); send_scan_rsp: if (sd == NULL) { goto send_set_param; } buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_SCAN_RSP_DATA, sizeof(*scan_rsp)); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } scan_rsp = bt_buf_extend(buf, sizeof(*scan_rsp)); memset(scan_rsp, 0, sizeof(*scan_rsp)); for (i = 0; sd[i].len > 0; i++) { /* Check if ad fit in the remaining buffer */ if (scan_rsp->len + sd[i].len + 1 > 29) { break; } memcpy(&scan_rsp->data[scan_rsp->len], &sd[i], sd[i].len + 1); scan_rsp->len += sd[i].len + 1; } bt_hci_cmd_send(BT_HCI_OP_LE_SET_SCAN_RSP_DATA, buf); send_set_param: buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_ADV_PARAMETERS, sizeof(*set_param)); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } set_param = bt_buf_extend(buf, sizeof(*set_param)); memset(set_param, 0, sizeof(*set_param)); set_param->min_interval = BT_HOST2LE16(300); set_param->max_interval = BT_HOST2LE16(300); set_param->type = type; set_param->channel_map = 0x07; bt_hci_cmd_send(BT_HCI_OP_LE_SET_ADV_PARAMETERS, buf); buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_ADV_ENABLE, 1); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } g_btdev.adv_enable = 0x01; memcpy(bt_buf_extend(buf, 1), &g_btdev.adv_enable, 1); return bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_ADV_ENABLE, buf, NULL); } /**************************************************************************** * Name: bt_stop_advertising * * Description: * Stops ongoing advertising. * * Returned Value: * Zero on success or (negative) error code otherwise. * ****************************************************************************/ int bt_stop_advertising(void) { FAR struct bt_buf_s *buf; if (!g_btdev.adv_enable) { wlwarn("WARNING: Already advertising\n"); return -EALREADY; } buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_ADV_ENABLE, 1); if (buf == NULL) { wlerr("ERROR: Failed to create buffer\n"); return -ENOBUFS; } g_btdev.adv_enable = 0x00; memcpy(bt_buf_extend(buf, 1), &g_btdev.adv_enable, 1); return bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_ADV_ENABLE, buf, NULL); } /**************************************************************************** * Name: bt_start_scanning * * Description: * Start LE scanning with and provide results through the specified * callback. * * Input Parameters: * filter_dups - Enable duplicate filtering (or not). * cb - Callback to notify scan results. * * Returned Value: * Zero on success or error code otherwise, positive in case * of protocol error or negative (POSIX) in case of stack internal error * ****************************************************************************/ int bt_start_scanning(uint8_t scan_filter, bt_le_scan_cb_t cb) { /* Return if active scan is already enabled */ if (g_scan_dev_found_cb) { wlwarn("WARNING: Already scanning\n"); return -EALREADY; } g_scan_dev_found_cb = cb; g_btdev.scan_filter = scan_filter; return bt_le_scan_update(); } /**************************************************************************** * Name: bt_stop_scanning * * Description: * Stops ongoing LE scanning. * * Returned Value: * Zero on success or error code otherwise, positive in case * of protocol error or negative (POSIX) in case of stack internal error * ****************************************************************************/ int bt_stop_scanning(void) { /* Return if active scanning is already disabled */ if (g_scan_dev_found_cb == NULL) { wlwarn("WARNING: Not scanning\n"); return -EALREADY; } g_scan_dev_found_cb = NULL; g_btdev.scan_filter = BT_LE_SCAN_FILTER_DUP_ENABLE; return bt_le_scan_update(); } /**************************************************************************** * Name: bt_le_scan_update * * Description: * Used to determine whether to start scan and which scan type should be * used. * * Returned Value: * Zero on success or error code otherwise, positive in case * of protocol error or negative (POSIX) in case of stack internal error * ****************************************************************************/ int bt_le_scan_update(void) { FAR struct bt_conn_s *conn; int ret; if (g_btdev.scan_enable) { if (g_scan_dev_found_cb) { return 0; } ret = bt_hci_stop_scanning(); if (ret) { return ret; } } if (g_scan_dev_found_cb) { return bt_hci_start_scanning(BT_LE_SCAN_ACTIVE, g_btdev.scan_filter); } conn = bt_conn_lookup_state(BT_ADDR_LE_ANY, BT_CONN_CONNECT_SCAN); if (!conn) { return 0; } bt_conn_release(conn); return bt_hci_start_scanning(BT_LE_SCAN_PASSIVE, g_btdev.scan_filter); } /**************************************************************************** * Name: bt_conn_cb_register * * Description: * Register callbacks to monitor the state of connections. * * Input Parameters: * cb - Instance of the callback structure. * ****************************************************************************/ void bt_conn_cb_register(FAR struct bt_conn_cb_s *cb) { cb->flink = g_callback_list; g_callback_list = cb; } FAR const char *bt_addr_str(FAR const bt_addr_t *addr) { static char bufs[2][18]; static uint8_t cur; FAR char *str; str = bufs[cur++]; cur %= ARRAY_SIZE(bufs); bt_addr_to_str(addr, str, sizeof(bufs[cur])); return str; } FAR const char *bt_addr_le_str(FAR const bt_addr_le_t *addr) { static char bufs[2][27]; static uint8_t cur; FAR char *str; str = bufs[cur++]; cur %= ARRAY_SIZE(bufs); bt_addr_le_to_str(addr, str, sizeof(bufs[cur])); return str; } #else /**************************************************************************** * Name: bt_hci_cb_register * * Description: * Register callbacks to handle RAW HCI packets * * Input Parameters: * cb - Instance of the callback structure. * * Returned Value: * None * ****************************************************************************/ void bt_hci_cb_register(FAR struct bt_hci_cb_s *cb) { g_hci_cb = cb; } #endif