/****************************************************************************
 * drivers/i2c/i2c_writeread.c
 *
 *   Copyright (C) 2016 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <assert.h>

#include <nuttx/i2c/i2c_master.h>

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: i2c_writeread
 *
 * Description:
 *   Send a block of data on I2C followed by restarted read access.  This
 *   provides a convenient wrapper to the transfer function.
 *
 * Input Parameters:
 *   dev     - Device-specific state data
 *   config  - Described the I2C configuration
 *   wbuffer - A pointer to the read-only buffer of data to be written to device
 *   wbuflen - The number of bytes to send from the buffer
 *   rbuffer - A pointer to a buffer of data to receive the data from the device
 *   rbuflen - The requested number of bytes to be read
 *
 * Returned Value:
 *   0: success, <0: A negated errno
 *
 ****************************************************************************/

int i2c_writeread(FAR struct i2c_master_s *dev,
                  FAR const struct i2c_config_s *config,
                  FAR const uint8_t *wbuffer, int wbuflen,
                  FAR uint8_t *rbuffer, int rbuflen)
{
  struct i2c_msg_s msg[2];
  unsigned int flags;

  /* 7- or 10-bit address? */

  DEBUGASSERT(config->addrlen == 10 || config->addrlen == 7);
  flags = (config->addrlen == 10) ? I2C_M_TEN : 0;

  /* Format two messages: The first is a write */

  msg[0].frequency = config->frequency,
  msg[0].addr      = config->address;
  msg[0].flags     = flags;
  msg[0].buffer    = (FAR uint8_t *)wbuffer;  /* Override const */
  msg[0].length =    wbuflen;

  /* The second is either a read (rbuflen > 0) or a write (rbuflen < 0) with
   * no restart.
   */

  if (rbuflen > 0)
    {
      msg[1].flags = (flags | I2C_M_READ);
    }
  else
    {
      msg[1].flags = (flags | I2C_M_NORESTART);
      rbuflen = -rbuflen;
    }

  msg[1].frequency = config->frequency,
  msg[1].addr      = config->address;
  msg[1].buffer    = rbuffer;
  msg[1].length    = rbuflen;

  /* Then perform the transfer. */

  return I2C_TRANSFER(dev, msg, 2);
}