# # For a description of the syntax of this configuration file, # see the file kconfig-language.txt in the NuttX tools repository. # if 16550_UART config 16550_SERIAL_DISABLE_REORDERING bool "Disable reordering of ttySx devices." default n ---help--- NuttX per default reorders the serial ports (/dev/ttySx) so that the console is always on /dev/ttyS0. If more than one UART is in use this can, however, have the side-effect that all port mappings (hardware USART1 -> /dev/ttyS0) change if the console is moved to another UART. This option disables that re-ordering for 16550 UARTs. config 16550_UART0 bool "16550 UART0" default n if 16550_UART0 config 16550_UART0_BASE hex "16550 UART0 base address" config 16550_UART0_CLOCK int "16550 UART0 clock" config 16550_UART0_CLOCK_NAME string "16550 UART0 clock name" depends on CLK config 16550_UART0_IRQ int "16550 UART0 IRQ number" config 16550_UART0_BAUD int "16550 UART0 BAUD" default 115200 config 16550_UART0_PARITY int "16550 UART0 parity" default 0 range 0 2 ---help--- 16550 UART0 parity. 0=None, 1=Odd, 2=Even. Default: None config 16550_UART0_BITS int "16550 UART0 number of bits" default 8 ---help--- 16550 UART0 number of bits. Default: 8 config 16550_UART0_2STOP int "16550 UART0 two stop bits" default 0 ---help--- 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit config 16550_UART0_RX_TRIGGER int "16550 UART0 RX interrupt trigger level" default 2 range 0 3 config 16550_UART0_RXBUFSIZE int "16550 UART0 Rx buffer size" default 256 ---help--- 16550 UART0 Rx buffer size. Default: 256 config 16550_UART0_TXBUFSIZE int "16550 UART0 Tx buffer size" default 256 ---help--- 16550 UART0 Tx buffer size. Default: 256 config 16550_UART0_IFLOWCONTROL bool "16550 UART0 RTS flow control" default n select SERIAL_IFLOWCONTROL ---help--- Enable 16550 UART0 RTS flow control config 16550_UART0_OFLOWCONTROL bool "16550 UART0 CTS flow control" default n select SERIAL_OFLOWCONTROL ---help--- Enable 16550 UART0 CTS flow control config 16550_UART0_DMA bool "16550 UART0 DMA support" default n select ARCH_DMA select SERIAL_DMA ---help--- Enable DMA transfers on 16550 UART0 if 16550_UART0_DMA config 16550_UART0_DMA_TX int "16550 UART0 DMA Tx channel identity" default -1 ---help--- -1 means don't use DMA for sending config 16550_UART0_DMA_RX int "16550 UART0 DMA Rx channel identity" default -1 ---help--- -1 means don't use DMA for receiving config 16550_UART0_DMA_RXBUFSIZE int "16550 UART0 DMA Rx buffer size" depends on 16550_UART0_DMA_RX != -1 default 16550_UART0_RXBUFSIZE ---help--- 16550 UART0 DMA Rx buffer size. config 16550_UART0_DMA_RXTIMEOUT int "16550 UART0 DMA Rx timeout(char)" depends on 16550_UART0_DMA_RX != -1 default 1 ---help--- 0 means DMA has no timeout for receiving endif endif # 16550_UART0 config 16550_UART1 bool "16550 UART1" default n if 16550_UART1 config 16550_UART1_BASE hex "16550 UART1 base address" config 16550_UART1_CLOCK int "16550 UART1 clock" config 16550_UART1_CLOCK_NAME string "16550 UART1 clock name" depends on CLK config 16550_UART1_IRQ int "16550 UART1 IRQ number" config 16550_UART1_BAUD int "16550 UART1 BAUD" default 115200 config 16550_UART1_PARITY int "16550 UART1 parity" default 0 range 0 2 ---help--- 16550 UART1 parity. 0=None, 1=Odd, 2=Even. Default: None config 16550_UART1_BITS int "16550 UART1 number of bits" default 8 ---help--- 16550 UART1 number of bits. Default: 8 config 16550_UART1_2STOP int "16550 UART1 two stop bits" default 0 ---help--- 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit config 16550_UART1_RX_TRIGGER int "16550 UART1 RX interrupt trigger level" default 2 range 0 3 config 16550_UART1_RXBUFSIZE int "16550 UART1 Rx buffer size" default 256 ---help--- 16550 UART1 Rx buffer size. Default: 256 config 16550_UART1_TXBUFSIZE int "16550 UART1 Tx buffer size" default 256 ---help--- 16550 UART1 Tx buffer size. Default: 256 config 16550_UART1_IFLOWCONTROL bool "16550 UART1 RTS flow control" default n select SERIAL_IFLOWCONTROL ---help--- Enable 16550 UART1 RTS flow control config 16550_UART1_OFLOWCONTROL bool "16550 UART1 CTS flow control" default n select SERIAL_OFLOWCONTROL ---help--- Enable 16550 UART1 CTS flow control config 16550_UART1_DMA bool "16550 UART1 DMA support" default n select ARCH_DMA select SERIAL_DMA ---help--- Enable DMA transfers on 16550 UART1 if 16550_UART1_DMA config 16550_UART1_DMA_TX int "16550 UART1 DMA Tx channel identity" default -1 ---help--- -1 means don't use DMA for sending config 16550_UART1_DMA_RX int "16550 UART1 DMA Rx channel identity" default -1 ---help--- -1 means don't use DMA for receiving config 16550_UART1_DMA_RXBUFSIZE int "16550 UART1 DMA Rx buffer size" depends on 16550_UART1_DMA_RX != -1 default 16550_UART1_RXBUFSIZE ---help--- 16550 UART1 DMA Rx buffer size. config 16550_UART1_DMA_RXTIMEOUT int "16550 UART1 DMA Rx timeout(char)" depends on 16550_UART1_DMA_RX != -1 default 1 ---help--- 0 means DMA has no timeout for receiving endif endif # 16550_UART1 config 16550_UART2 bool "16550 UART2" default n if 16550_UART2 config 16550_UART2_BASE hex "16550 UART2 base address" config 16550_UART2_CLOCK int "16550 UART2 clock" config 16550_UART2_CLOCK_NAME string "16550 UART2 clock name" depends on CLK config 16550_UART2_IRQ int "16550 UART2 IRQ number" config 16550_UART2_BAUD int "16550 UART2 BAUD" default 115200 config 16550_UART2_PARITY int "16550 UART2 parity" default 0 range 0 2 ---help--- 16550 UART2 parity. 0=None, 1=Odd, 2=Even. Default: None config 16550_UART2_BITS int "16550 UART2 number of bits" default 8 ---help--- 16550 UART2 number of bits. Default: 8 config 16550_UART2_2STOP int "16550 UART2 two stop bits" default 0 ---help--- 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit config 16550_UART2_RX_TRIGGER int "16550 UART2 RX interrupt trigger level" default 2 range 0 3 config 16550_UART2_RXBUFSIZE int "16550 UART2 Rx buffer size" default 256 ---help--- 16550 UART2 Rx buffer size. Default: 256 config 16550_UART2_TXBUFSIZE int "16550 UART2 Tx buffer size" default 256 ---help--- 16550 UART2 Tx buffer size. Default: 256 config 16550_UART2_IFLOWCONTROL bool "16550 UART2 RTS flow control" default n select SERIAL_IFLOWCONTROL ---help--- Enable 16550 UART2 RTS flow control config 16550_UART2_OFLOWCONTROL bool "16550 UART2 CTS flow control" default n select SERIAL_OFLOWCONTROL ---help--- Enable 16550 UART2 CTS flow control config 16550_UART2_DMA bool "16550 UART2 DMA support" default n select ARCH_DMA select SERIAL_DMA ---help--- Enable DMA transfers on 16550 UART2 if 16550_UART2_DMA config 16550_UART2_DMA_TX int "16550 UART2 DMA Tx channel identity" default -1 ---help--- -1 means don't use DMA for sending config 16550_UART2_DMA_RX int "16550 UART2 DMA Rx channel identity" default -1 ---help--- -1 means don't use DMA for receiving config 16550_UART2_DMA_RXBUFSIZE int "16550 UART2 DMA Rx buffer size" depends on 16550_UART2_DMA_RX != -1 default 16550_UART2_RXBUFSIZE ---help--- 16550 UART2 DMA Rx buffer size. config 16550_UART2_DMA_RXTIMEOUT int "16550 UART2 DMA Rx timeout(char)" depends on 16550_UART2_DMA_RX != -1 default 1 ---help--- 0 means DMA has no timeout for receiving endif endif # 16550_UART2 config 16550_UART3 bool "16550 UART3" default n if 16550_UART3 config 16550_UART3_BASE hex "16550 UART3 base address" config 16550_UART3_CLOCK int "16550 UART3 clock" config 16550_UART3_CLOCK_NAME string "16550 UART3 clock name" depends on CLK config 16550_UART3_IRQ int "16550 UART3 IRQ number" config 16550_UART3_BAUD int "16550 UART3 BAUD" default 115200 config 16550_UART3_PARITY int "16550 UART3 parity" default 0 range 0 2 ---help--- 16550 UART3 parity. 0=None, 1=Odd, 2=Even. Default: None config 16550_UART3_BITS int "16550 UART3 number of bits" default 8 ---help--- 16550 UART3 number of bits. Default: 8 config 16550_UART3_2STOP int "16550 UART3 two stop bits" default 0 ---help--- 0=1 stop bit, 1=Two stop bits. Default: 1 stop bit config 16550_UART3_RX_TRIGGER int "16550 UART3 RX interrupt trigger level" default 2 range 0 3 config 16550_UART3_RXBUFSIZE int "16550 UART3 Rx buffer size" default 256 ---help--- 16550 UART3 Rx buffer size. Default: 256 config 16550_UART3_TXBUFSIZE int "16550 UART3 Tx buffer size" default 256 ---help--- 16550 UART3 Tx buffer size. Default: 256 config 16550_UART3_IFLOWCONTROL bool "16550 UART3 RTS flow control" default n select SERIAL_IFLOWCONTROL ---help--- Enable 16550 UART3 RTS flow control config 16550_UART3_OFLOWCONTROL bool "16550 UART3 CTS flow control" default n select SERIAL_OFLOWCONTROL ---help--- Enable 16550 UART3 CTS flow control config 16550_UART3_DMA bool "16550 UART3 DMA support" default n select ARCH_DMA select SERIAL_DMA ---help--- Enable DMA transfers on 16550 UART3 if 16550_UART3_DMA config 16550_UART3_DMA_TX int "16550 UART3 DMA Tx channel identity" default -1 ---help--- -1 means don't use DMA for sending config 16550_UART3_DMA_RX int "16550 UART3 DMA Rx channel identity" default -1 ---help--- -1 means don't use DMA for receiving config 16550_UART3_DMA_RXBUFSIZE int "16550 UART3 DMA Rx buffer size" depends on 16550_UART3_DMA_RX != -1 default 16550_UART3_RXBUFSIZE ---help--- 16550 UART3 DMA Rx buffer size. config 16550_UART3_DMA_RXTIMEOUT int "16550 UART3 DMA Rx timeout(char)" depends on 16550_UART3_DMA_RX != -1 default 1 ---help--- 0 means DMA has no timeout for receiving endif endif # 16550_UART3 choice prompt "16550 Serial Console" default 16550_NO_SERIAL_CONSOLE depends on DEV_CONSOLE config 16550_UART0_SERIAL_CONSOLE bool "16550 UART0 serial console" depends on 16550_UART0 select SERIAL_CONSOLE config 16550_UART1_SERIAL_CONSOLE bool "16550 UART1 serial console" depends on 16550_UART1 select SERIAL_CONSOLE config 16550_UART2_SERIAL_CONSOLE bool "16550 UART2 serial console" depends on 16550_UART2 select SERIAL_CONSOLE config 16550_UART3_SERIAL_CONSOLE bool "16550 UART3 serial console" depends on 16550_UART3 select SERIAL_CONSOLE config 16550_NO_SERIAL_CONSOLE bool "No 16550 serial console" endchoice # 16550 Serial Console config 16550_SUPRESS_CONFIG bool "Suppress 16550 configuration" default n config 16550_SUPRESS_INITIAL_CONFIG bool "Suppress initial 16550 configuration" depends on !16550_SUPRESS_CONFIG default n ---help--- This option is useful, for example, if you are using a bootloader that configures the 16550_UART. In that case, you may want to just leave the existing console configuration in place. Default: n config SERIAL_UART_ARCH_MMIO bool "Platform access register through the memory mapping" default n config SERIAL_UART_ARCH_IOCTL bool "Platform has own custom IOCTL" default n config 16550_REGINCR int "Address increment between 16550 registers" default 1 ---help--- The address increment between 16550 registers. Options are 1, 2, or 4. Default: 1 config 16550_REGWIDTH int "Bit width of 16550 registers" default 8 ---help--- The bit width of registers. Options are 8, 16, or 32. Default: 8 config 16550_ADDRWIDTH int "Address width of 16550 registers" default 8 ---help--- The bit width of registers. Options are 0, 8, 16, or 32. Default: 8 Note: 0 means auto detect address size (uintptr_t) config 16550_WAIT_LCR bool "Wait for UART before setting LCR" default n ---help--- Before setting the Line Control Register (LCR), wait until UART is not busy. This is required for Synopsys DesignWare 8250, which will trigger spurious interrupts when setting the LCR without waiting. Default: n config 16550_SET_MCR_OUT2 bool "Set MCR OUT2 bit high" default n ---help--- Some platforms require OUT2 of MCR being set for interrupt to be triggered config 16550_DLF_SIZE int "DLF(Divisor Latch Fraction) size of DesignWare APB UART" default 0 ---help--- The bit width of DLF register for DesignWare APB UART. DLF_SIZE=0 means no support. Default: 0 endif # 16550_UART