README ^^^^^^ Toolchain ^^^^^^^^^ A GNU GCC-based toolchain is assumed. The files */setenv.sh should be modified to point to the correct path to the SH toolchain (if different from the default). If you have no SH toolchain, one can be downloaded from the NuttX SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573). 1. You must have already configured Nuttx in nuttx. cd tools ./configure.sh mcu123-lpc214x/ 2. Download the latest buildroot package into 3. unpack 4. cd /buildroot 5. cp configs/arm-defconfig .config 6. make oldconfig 7. make 8. Edit setenv.h so that the PATH variable includes the path to the newly built binaries. Flash Tools ^^^^^^^^^^^ I use the lpc21isp tool to load NuttX into FLASH. That tool is available in the files section at http://tech.groups.yahoo.com/group/lpc21isp/. In order version 1.60 of lpc21isp for Linux, I had to make several changes. This changes are shown in lpc21ips-1.60.diff. I use the script lpc21isp.sh to perform the actual download. You will probably have to make some changes to this script in order to use it. For example, the path to the built lpc21isp binary will most likely have to have change. Then move this script to the top level NuttX directory and simply execute it to load NuttX onto the board. ARM/LPC214X-specific Configuration Options ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ CONFIG_ARCH - Identifies the arch/ subdirectory. This should be set to: CONFIG_ARCH=arm CONFIG_ARCH_name - For use in C code: CONFIG_ARCH_ARM=y CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory CONFIG_ARCH_CHIP=c5471 CONFIG_ARCH_CHIP_name - For use in C code CONFIG_ARCH_CHIP_C5471 CONFIG_ARCH_BOARD - Identifies the configs subdirectory and hence, the board that supports the particular chip or SoC. CONFIG_ARCH_BOARD=c5471evm (for the Spectrum Digital C5471 EVM) CONFIG_ARCH_BOARD_name - For use in C code CONFIG_ARCH_BOARD_C5471EVM (for the Spectrum Digital C5471 EVM) CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation of delay loops CONFIG_ENDIAN_BIG - define if big endian (default is little endian) CONFIG_DRAM_SIZE - Describes the installed DRAM. CONFIG_DRAM_START - The start address of installed DRAM CONFIG_DRAM_END - Should be (CONFIG_DRAM_START+CONFIG_DRAM_SIZE) CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that have LEDs CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt stack. If defined, this symbol is the size of the interrupt stack in bytes. If not defined, the user task stacks will be used during interrupt handling. CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions LPC2148 specific chip initialization CONFIG_EXTMEM_MODE, CONFIG_RAM_MODE, CONFIG_CODE_BASE, CONFIG_PLL_SETUP, CONFIG_MAM_SETUP, CONFIG_APBDIV_SETUP, CONFIG_EMC_SETUP, CONFIG_BCFG0_SETUP, CONFIG_BCFG1_SETUP, CONFIG_BCFG2_SETUP, CONFIG_BCFG3_SETUP, CONFIG_ADC_SETUP LPC214X specific device driver settings CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the console and ttys0 (default is the UART0). CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. This specific the size of the receive buffer CONFIG_UARTn_TXBUFSIZE - Characters are buffered before being sent. This specific the size of the transmit buffer CONFIG_UARTn_BAUD - The configure BAUD of the UART. CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0 CONFIG_UARTn_2STOP - Two stop bits LPC214X USB Configuration CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT Handle USB Start-Of-Frame events. Enable reading SOF from interrupt handler vs. simply reading on demand. Probably a bad idea... Unless there is some issue with sampling the SOF from hardware asynchronously. CONFIG_LPC214X_USBDEV_EPFAST_INTERRUPT Enable high priority interrupts. I have no idea why you might want to do that CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS Number of DMA descriptors to allocate in the 8Kb USB RAM. This is a tradeoff between the number of DMA channels that can be supported vs the size of the DMA buffers available. CONFIG_LPC214X_USBDEV_DMA Enable lpc214x-specific DMA support Configurations ^^^^^^^^^^^^^^ Each NXP LPC214x configuration is maintained in a sudirectory and can be selected as follow: cd tools ./configure.sh mcu123-lpc214x/ cd - . ./setenv.sh Where is one of the following: ostest ^^^^^^ This configuration directory, performs a simple OS test using examples/ostest. nsh ^^^ Configures the NuttShell (nsh) located at examples/nsh. The Configuration enables only the serial NSH interfaces. Configuration Options ^^^^^^^^^^^^^^^^^^^^^ In additional to the common configuration options listed in the file configs/README.txt, there are other configuration options specific to the LPC214x: CONFIG_ARCH - identifies the arch subdirectory and, hence, the processor architecture. CONFIG_ARCH_name - for use in C code. This identifies the particular chip or SoC that the architecture is implemented in. CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory CONFIG_ARCH_CHIP_name - For use in C code CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, the board that supports the particular chip or SoC. CONFIG_ENDIAN_BIG - define if big endian (default is little endian) CONFIG_ARCH_BOARD_name - for use in C code CONFIG_BOARD_LOOPSPERMSEC - for delay loops CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to lpc2148. CONFIG_DRAM_SIZE - Describes the internal DRAM. CONFIG_DRAM_START - The start address of internal DRAM CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions LPC2148 specific chip initialization CONFIG_EXTMEM_MODE, CONFIG_RAM_MODE. CONFIG_CODE_BASE, CONFIG_PLL_SETUP, CONFIG_MAM_SETUP, CONFIG_APBDIV_SETUP, CONFIG_EMC_SETUP,. CONFIG_BCFG0_SETUP, CONFIG_BCFG1_SETUP, CONFIG_BCFG2_SETUP, CONFIG_BCFG3_SETUP, CONFIG_ADC_SETUP LPC214X UART device driver settings CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the console and ttys0 (default is the UART0). CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. This specific the size of the receive buffer CONFIG_UARTn_TXBUFSIZE - Characters are buffered before being sent. This specific the size of the transmit buffer CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0 CONFIG_UARTn_2STOP - Two stop bits LPC214X USB Configuration CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT Handle USB Start-Of-Frame events. Enable reading SOF from interrupt handler vs. simply reading on demand. Probably a bad idea... Unless there is some issue with sampling the SOF from hardware asynchronously. CONFIG_LPC214X_USBDEV_EPFAST_INTERRUPT Enable high priority interrupts. I have no idea why you might want to do that CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS Number of DMA descriptors to allocate in the 8Kb USB RAM. This is a tradeoff between the number of DMA channels that can be supported vs the size of the DMA buffers available. CONFIG_LPC214X_USBDEV_DMA Enable lpc214x-specific DMA support