/**************************************************************************** * drivers/syslog/syslog.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __DRIVERS_SYSLOG_SYSLOG_H #define __DRIVERS_SYSLOG_SYSLOG_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include /**************************************************************************** * Public Data ****************************************************************************/ #ifndef __ASSEMBLY__ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /* This is the current syslog channel in use. It initially points to * g_default_channel. */ #ifdef CONFIG_SYSLOG EXTERN FAR syslog_channel_t * #ifndef CONFIG_SYSLOG_REGISTER const #endif g_syslog_channel[CONFIG_SYSLOG_MAX_CHANNELS]; /**************************************************************************** * Public Function Prototypes ****************************************************************************/ /**************************************************************************** * Name: syslog_dev_initialize * * Description: * Initialize to use the character device (or file) at * CONFIG_SYSLOG_DEVPATH as the SYSLOG sink. * * One power up, the SYSLOG facility is non-existent or limited to very * low-level output. This function may be called later in the * initialization sequence after full driver support has been initialized. * (via syslog_initialize()) It installs the configured SYSLOG drivers * and enables full SYSLOGing capability. * * NOTE that this implementation excludes using a network connection as * SYSLOG device. That would be a good extension. * * Input Parameters: * devpath - The full path to the character device to be used. * oflags - File open flags. * mode - File open mode (only if oflags include O_CREAT). * * Returned Value: * Returns a newly created SYSLOG channel, or NULL in case of any failure. * ****************************************************************************/ FAR syslog_channel_t *syslog_dev_initialize(FAR const char *devpath, int oflags, int mode); /**************************************************************************** * Name: syslog_dev_uninitialize * * Description: * Called to disable the last device/file channel in preparation to use * a different SYSLOG device. Currently only used for CONFIG_SYSLOG_FILE. * * Input Parameters: * channel - Handle to syslog channel to be used. * * Assumptions: * The caller has already switched the SYSLOG source to some safe channel * (the default channel). * ****************************************************************************/ void syslog_dev_uninitialize(FAR syslog_channel_t *channel); /**************************************************************************** * Name: syslog_dev_channel * * Description: * Configure to use the character device (or file) at * CONFIG_SYSLOG_DEVPATH as the SYSLOG channel. * * This tiny function is simply a wrapper around syslog_dev_initialize() * and syslog_channel_register(). It calls syslog_dev_initialize() to * configure the character device at CONFIG_SYSLOG_DEVPATH then calls * syslog_channel_register() to use that device as the SYSLOG output * channel. * * NOTE interrupt level SYSLOG output will be lost in this case unless * the interrupt buffer is used. * * Input Parameters: * None * * Returned Value: * A pointer to the new SYSLOG channel; NULL is returned on any failure. * ****************************************************************************/ #ifdef CONFIG_SYSLOG_CHAR FAR syslog_channel_t *syslog_dev_channel(void); #endif /**************************************************************************** * Name: syslog_console_channel * * Description: * Configure to use the character device (or file) at /dev/console as the * SYSLOG channel. * * This tiny function is simply a wrapper around syslog_dev_initialize() * and syslog_channel_register(). It calls syslog_dev_initialize() to * configure the character device at /dev/console then calls * syslog_channel_register() to use that device as the SYSLOG output * channel. * * NOTE interrupt level SYSLOG output will be lost in the general case * unless the interrupt buffer is used. As a special case: If the serial * console is used and the architecture provides up_putc(), the interrupt * level output will be directed to up_putc() is the interrupt buffer is * disabled. * * Input Parameters: * None * * Returned Value: * A pointer to the new SYSLOG channel; NULL is returned on any failure. * ****************************************************************************/ #ifdef CONFIG_SYSLOG_CONSOLE FAR syslog_channel_t *syslog_console_channel(void); #endif /**************************************************************************** * Name: syslog_register * * Description: * Register a simple character driver at /dev/log whose write() method * will transfer data to the SYSLOG device. This can be useful if, for * example, you want to redirect the output of a program to the SYSLOG. * * NOTE that unlike other syslog output, this data is unformatted raw * byte output with no time-stamping or any other SYSLOG features * supported. * ****************************************************************************/ #ifdef CONFIG_SYSLOG_CHARDEV void syslog_register(void); #endif /**************************************************************************** * Name: syslog_add_intbuffer * * Description: * Add one more character to the interrupt buffer. In the event of * buffer overflowed, the character will be dropped. The indication * "[truncated]\n" will be appended to the end of the interrupt buffer. * * Input Parameters: * ch - The character to add to the interrupt buffer (must be positive). * * Returned Value: * Zero success, the character is echoed back to the caller. A negated * errno value is returned on any failure. * * Assumptions: * Called only from interrupt handling logic; Interrupts will be disabled. * ****************************************************************************/ #ifdef CONFIG_SYSLOG_INTBUFFER int syslog_add_intbuffer(int ch); #endif /**************************************************************************** * Name: syslog_flush_intbuffer * * Description: * Flush any characters that may have been added to the interrupt buffer * to the SYSLOG device. * * Input Parameters: * force - Use the force() method of the channel vs. the putc() method. * * Returned Value: * On success, the character is echoed back to the caller. A negated * errno value is returned on any failure. * * Assumptions: * Interrupts may or may not be disabled. * ****************************************************************************/ #ifdef CONFIG_SYSLOG_INTBUFFER int syslog_flush_intbuffer(bool force); #endif #endif /* CONFIG_SYSLOG */ #undef EXTERN #ifdef __cplusplus } #endif #endif /* __ASSEMBLY__ */ #endif /* __DRIVERS_SYSLOG_SYSLOG_H */