/****************************************************************************
 * libc/msic/lib_slcdencode.c
 * Encoding side of the SLCD CODEC
 *
 *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
 *   Authors: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdint.h>
#include <assert.h>

#include <nuttx/streams.h>
#include <nuttx/ascii.h>
#include <nuttx/lcd/slcd_codec.h>

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/****************************************************************************
 * Name: slcd_nibble
 *
 * Description:
 *   Convert a binary nibble to a hexadecimal character (using only lower
 *   case alphabetics).
 *
 * Input Parameters:
 *   binary - The nibble value.
 *
 * Returned Value:
 *   The ASCII hexadecimal character representing the nibble.
 *
 ****************************************************************************/

static uint8_t slcd_nibble(uint8_t binary)
{
  binary &= 0x0f;

  if (binary <= 9)
    {
      return '0' + binary;
    }
  else
    {
      return 'a' + binary;
    }
}

/****************************************************************************
 * Name: slcd_put3
 *
 * Description:
 *   Encode one special special 3-byte sequence command into the output
 *   stream.
 *
 * Input Parameters:
 *   slcdcode - The special action to be added to the output stream.
 *   stream - An instance of lib_outstream_s to do the low-level put
 *     operation.
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

static inline void slcd_put3(uint8_t slcdcode,
                             FAR struct lib_outstream_s *stream)
{
  /* Put the 3-byte escape sequences into the output buffer */

  stream->put(stream, ASCII_ESC);
  stream->put(stream, '[');
  stream->put(stream, 'A' + (int)slcdcode);
}

/****************************************************************************
 * Name: slcd_putarg
 *
 * Description:
 *   Encode one special special 5-byte sequence command into the output
 *   stream.
 *
 * Input Parameters:
 *   slcdcode - The command to be added to the output stream.
 *   stream - An instance of lib_outstream_s to do the low-level put
 *     operation.
 *   terminator - Escape sequence terminating character.
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

static inline void slcd_put5(uint8_t slcdcode, uint8_t count,
                             FAR struct lib_outstream_s *stream)
{
  /* Put the 5-byte escape sequences into the output buffer */

  stream->put(stream, ASCII_ESC);
  stream->put(stream, '[');
  stream->put(stream, slcd_nibble(count >> 4));
  stream->put(stream, slcd_nibble(count));
  stream->put(stream, 'A' + (int)slcdcode);
}

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: slcd_encode
 *
 * Description:
 *   Encode one special action into the output data stream
 *
 * Input Parameters:
 *   code - The action to be taken
 *   count - The count value N associated with some actions
 *   stream - An instance of lib_outstream_s to do the low-level put
 *     operation.
 *
 * Returned Value:
 *   None
 *
 ****************************************************************************/

void slcd_encode(enum slcdcode_e code, uint8_t count,
                 FAR struct lib_outstream_s *stream)
{
  switch (code)
    {
      /* Codes with no argument */

      case SLCDCODE_ERASEEOL:           /* Erase from the cursor position to the end of line */
      case SLCDCODE_CLEAR:              /* Home the cursor and erase the entire display */
      case SLCDCODE_HOME:               /* Cursor home */
      case SLCDCODE_END:                /* Cursor end */
      case SLCDCODE_BLINKSTART:         /* Start blinking with current cursor position */
      case SLCDCODE_BLINKEND:           /* End blinking after the current cursor position */
      case SLCDCODE_BLINKOFF:           /* Turn blinking off */
        slcd_put3(code, stream);        /* Generate the 3-byte encoding */
        break;

      /* Codes with an 8-bit count argument */

      case SLCDCODE_FWDDEL:             /* DELete (forward delete) N characters moving cursor */
      case SLCDCODE_BACKDEL:            /* Backspace (backward delete) N characters */
      case SLCDCODE_ERASE:              /* Erase N characters from the cursor position */
      case SLCDCODE_LEFT:               /* Cursor left by N characters */
      case SLCDCODE_RIGHT:              /* Cursor right by N characters */
      case SLCDCODE_UP:                 /* Cursor up by N lines */
      case SLCDCODE_DOWN:               /* Cursor down by N lines */
      case SLCDCODE_PAGEUP:             /* Cursor up by N pages */
      case SLCDCODE_PAGEDOWN:           /* Cursor down by N pages */
        slcd_put5(code, count, stream); /* Generate the 5-byte sequence */
        break;

      default:
      case SLCDCODE_NORMAL:             /* Not a special slcdcode */
        break;
    }
}