/**************************************************************************** * arch/avr/include/at32uc3/irq.h * * Copyright (C) 2010 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /* This file should never be included directed but, rather, * only indirectly through nuttx/irq.h */ #ifndef __ARCH_AVR_INCLUDE_AT32UC3_IRQ_H #define __ARCH_AVR_INCLUDE_AT32UC3_IRQ_H /**************************************************************************** * Included Files ****************************************************************************/ #ifndef __ASSEMBLY__ # include #endif /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* Configuration CONFIG_AVR32_GPIOIRQ must be selected to enable the overall * GPIO IRQ feature and CONFIG_AVR32_GPIOIRQSETA and/or * CONFIG_AVR32_GPIOIRQSETB must be enabled to select GPIOs to support * interrupts on. */ #ifndef CONFIG_AVR32_GPIOIRQ # undef CONFIG_AVR32_GPIOIRQSETA # undef CONFIG_AVR32_GPIOIRQSETB #endif /* IRQ numbers **************************************************************/ /* Events. These exclude: * * - The Reset event which vectors directly either to 0x8000:0000 (uc3a) or * to 0xa000:0000 (uc3b). * - The OCD stop from the OSD system * - Autovectored interrupt requests * * Others vector relative to the contents of the EVBA register. */ #define AVR32_IRQ_UNREC 0 /* EVBA+0x00 Unrecoverable exception */ #define AVR32_IRQ_TLBMULT 1 /* EVBA+0x04 TLB multiple hit */ #define AVR32_IRQ_BUSDATA 2 /* EVBA+0x08 Bus error data fetch */ #define AVR32_IRQ_BUSINST 3 /* EVBA+0x0c Bus error instruction fetch */ #define AVR32_IRQ_NMI 4 /* EVBA+0x10 NMI */ #define AVR32_IRQ_INSTADDR 5 /* EVBA+0x14 Instruction Address */ #define AVR32_IRQ_ITLBPROT 6 /* EVBA+0x18 ITLB Protection */ #define AVR32_IRQ_BP 7 /* EVBA+0x1c Breakpoint */ #define AVR32_IRQ_INVINST 8 /* EVBA+0x20 Illegal Opcode */ #define AVR32_IRQ_UNIMPINST 9 /* EVBA+0x24 Unimplemented instruction */ #define AVR32_IRQ_PRIV 10 /* EVBA+0x28 Privilege violation */ #define AVR32_IRQ_FP 11 /* EVBA+0x2c Floating-point */ #define AVR32_IRQ_COP 12 /* EVBA+0x30 Coprocessor absent */ #define AVR32_IRQ_RDDATA 13 /* EVBA+0x34 Data Address (Read) */ #define AVR32_IRQ_WRDATA 14 /* EVBA+0x38 Data Address (Write) */ #define AVR32_IRQ_RDDTLBPROT 15 /* EVBA+0x3c DTLB Protection (Read) */ #define AVR32_IRQ_WRDTLBPROT 16 /* EVBA+0x40 DTLB Protection (Write) */ #define AVR32_IRQ_DLTBMOD 17 /* EVBA+0x44 DTLB Modified */ #define AVR32_IRQ_ITLBMISS 18 /* EVBA+0x50 ITLB Miss */ #define AVR32_IRQ_RDDTLB 19 /* EVBA+0x60 DTLB Miss (Read) */ #define AVR32_IRQ_WRDTLB 20 /* EVBA+0x70 DTLB Miss (Write) */ #define AVR32_IRQ_SUPER 21 /* EVBA+0x100 Supervisor call */ #define AVR32_IRQ_NEVENTS 22 /* "The INTC collects interrupt requests from the peripherals, prioritizes * them, and delivers an interrupt request and an autovector to the CPU. The * AVR32 architecture supports 4 priority levels for regular, maskable * interrupts, and a Non-Maskable Interrupt (NMI)." * * "The INTC supports up to 64 groups of interrupts. Each group can have up * to 32 interrupt request lines, these lines are connected to the peripherals. * Each group has an Interrupt Priority Register (IPR) and an Interrupt Request * Register (IRR). The IPRs are used to assign a priority level and an autovector * to each group, and the IRRs are used to identify the active interrupt request * within each group. If a group has only one interrupt request line, an active * interrupt group uniquely identifies the active interrupt request line, and * the corresponding IRR is not needed. The INTC also provides one Interrupt * Cause Register (ICR) per priority level. These registers identify the group * that has a pending interrupt of the corresponding priority level. If several * groups have a pending interrupt of the same level, the group with the lowest * number takes priority." */ /* Only 19 groups (0-18) are used with the AT32UC3A/B: */ #define AVR32_IRQ_INTPRIOS 4 /* 4 interrupt priorities */ #define AVR32_IRQ_MAXGROUPS 64 /* Architecture supports up to 64 groups */ #define AVR32_IRQ_NGROUPS 19 /* UC3 A/B support only 19 */ /* Group 0 */ #define AVR32_IRQ_BASEIRQGRP0 22 #define AVR32_IRQ_NREQGRP0 1 #define AVR32_IRQ_UC 22 /* 0 AVR32 UC CPU */ /* Group 1 */ #define AVR32_IRQ_BASEIRQGRP1 23 #define AVR32_IRQ_NREQGRP1 10 #define AVR32_IRQ_EIC0 23 /* 0 External Interrupt Controller 0 */ #define AVR32_IRQ_EIC1 24 /* 1 External Interrupt Controller 1 */ #define AVR32_IRQ_EIC2 25 /* 2 External Interrupt Controller 2 */ #define AVR32_IRQ_EIC3 26 /* 3 External Interrupt Controller 3 */ #define AVR32_IRQ_EIC4 27 /* 4 External Interrupt Controller 4 */ #define AVR32_IRQ_EIC5 28 /* 5 External Interrupt Controller 5 */ #define AVR32_IRQ_EIC6 29 /* 6 External Interrupt Controller 6 */ #define AVR32_IRQ_EIC7 30 /* 7 External Interrupt Controller 7 */ #define AVR32_IRQ_RTC 31 /* 8 Real Time Counter RTC */ #define AVR32_IRQ_PM 32 /* 9 Power Manager PM */ /* Group 2 */ #define AVR32_IRQ_BASEIRQGRP2 33 #define AVR32_IRQ_NREQGRP2 6 #define AVR32_IRQ_GPIO0 33 /* 0 General Purpose Input/Output Controller 0 */ #define AVR32_IRQ_GPIO1 34 /* 1 General Purpose Input/Output Controller 1 */ #define AVR32_IRQ_GPIO2 35 /* 2 General Purpose Input/Output Controller 2 */ #define AVR32_IRQ_GPIO3 36 /* 3 General Purpose Input/Output Controller 3 */ #define AVR32_IRQ_GPIO4 37 /* 4 General Purpose Input/Output Controller 4 */ #define AVR32_IRQ_GPIO5 38 /* 5 General Purpose Input/Output Controller 5 */ /* Group 3 */ #define AVR32_IRQ_BASEIRQGRP3 39 #define AVR32_IRQ_NREQGRP3 7 #define AVR32_IRQ_PDCA0 39 /* 0 Peripheral DMA Controller 0 */ #define AVR32_IRQ_PDCA1 40 /* 1 Peripheral DMA Controller 1 */ #define AVR32_IRQ_PDCA2 41 /* 2 Peripheral DMA Controller 2 */ #define AVR32_IRQ_PDCA3 42 /* 3 Peripheral DMA Controller 3 */ #define AVR32_IRQ_PDCA4 43 /* 4 Peripheral DMA Controller 4 */ #define AVR32_IRQ_PDCA5 44 /* 5 Peripheral DMA Controller 5 */ #define AVR32_IRQ_PDCA6 45 /* 6 Peripheral DMA Controller 6 */ /* Group 4 */ #define AVR32_IRQ_BASEIRQGRP4 46 #define AVR32_IRQ_NREQGRP4 1 #define AVR32_IRQ_FLASHC 46 /* 0 Flash Controller */ /* Group 5 */ #define AVR32_IRQ_BASEIRQGRP5 47 #define AVR32_IRQ_NREQGRP5 1 #define AVR32_IRQ_USART0 47 /* 0 Universal Synchronous/Asynchronous * Receiver/Transmitter 0 */ /* Group 6 */ #define AVR32_IRQ_BASEIRQGRP6 48 #define AVR32_IRQ_NREQGRP6 1 #define AVR32_IRQ_USART1 48 /* 0 Universal Synchronous/Asynchronous * Receiver/Transmitter 1 */ /* Group 7 */ #define AVR32_IRQ_BASEIRQGRP7 49 #define AVR32_IRQ_NREQGRP7 1 #define AVR32_IRQ_USART2 49 /* 0 Universal Synchronous/Asynchronous * Receiver/Transmitter 2 */ #define AVR32_IRQ_BASEIRQGRP8 50 #define AVR32_IRQ_NREQGRP8 0 /* Group 9 */ #define AVR32_IRQ_BASEIRQGRP9 50 #define AVR32_IRQ_NREQGRP9 1 #define AVR32_IRQ_SPI 50 /* 0 Serial Peripheral Interface */ #define AVR32_IRQ_BASEIRQGRP10 51 #define AVR32_IRQ_NREQGRP10 0 /* Group 11 */ #define AVR32_IRQ_BASEIRQGRP11 51 #define AVR32_IRQ_NREQGRP11 1 #define AVR32_IRQ_TWI 51 /* 0 Two-wire Interface TWI */ /* Group 12 */ #define AVR32_IRQ_BASEIRQGRP12 52 #define AVR32_IRQ_NREQGRP12 1 #define AVR32_IRQ_PWM 52 /* 0 Pulse Width Modulation Controller */ /* Group 13 */ #define AVR32_IRQ_BASEIRQGRP13 53 #define AVR32_IRQ_NREQGRP13 1 #define AVR32_IRQ_SSC 53 /* 0 Synchronous Serial Controller */ /* Group 14 */ #define AVR32_IRQ_BASEIRQGRP14 54 #define AVR32_IRQ_NREQGRP14 3 #define AVR32_IRQ_TC0 54 /* 0 Timer/Counter 0 */ #define AVR32_IRQ_TC1 55 /* 1 Timer/Counter 1 */ #define AVR32_IRQ_TC2 56 /* 2 Timer/Counter 2 */ /* Group 15 */ #define AVR32_IRQ_BASEIRQGRP15 57 #define AVR32_IRQ_NREQGRP15 1 #define AVR32_IRQ_ADC 57 /* 0 Analog to Digital Converter */ #define AVR32_IRQ_BASEIRQGRP16 58 #define AVR32_IRQ_NREQGRP16 0 /* Group 17 */ #define AVR32_IRQ_BASEIRQGRP17 58 #define AVR32_IRQ_NREQGRP17 1 #define AVR32_IRQ_USBB 58 /* 0 USB 2.0 Interface USBB */ /* Group 18 */ #define AVR32_IRQ_BASEIRQGRP18 59 #define AVR32_IRQ_NREQGRP18 1 #define AVR32_IRQ_ABDAC 59 /* 0 Audio Bitstream DAC */ /* Total number of IRQ numbers */ #define AVR32_IRQ_BADVECTOR 60 /* Not a real IRQ number */ #define NR_IRQS 60 /* GPIO IRQ Numbers *********************************************************/ /* These numbers correspond to GPIO port numbers that have interrupts * enabled. These are all decoded by the AVR32_IRQ_GPIO interrupt handler. * A lot of effort was made here to keep the number of IRQs to a minimum * since it will correspond to various, internal table sizes. */ /* Up to 32 GPIO interrupts in PORTA0-31 */ #define __IRQ_GPPIO_PA0 0 #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000001) != 0 # define AVR32_IRQ_GPIO_PA0 __IRQ_GPPIO_PA0 # define __IRQ_GPIO_PA1 (__IRQ_GPPIO_PA0+1) #else # define __IRQ_GPIO_PA1 __IRQ_GPPIO_PA0 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000002) != 0 # define AVR32_IRQ_GPIO_PA1 __IRQ_GPIO_PA1 # define __IRQ_GPIO_PA2 (__IRQ_GPIO_PA1+1) #else # define __IRQ_GPIO_PA2 __IRQ_GPIO_PA1 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000004) != 0 # define AVR32_IRQ_GPIO_PA2 __IRQ_GPIO_PA2 # define __IRQ_GPIO_PA3 (__IRQ_GPIO_PA2+1) #else # define __IRQ_GPIO_PA3 __IRQ_GPIO_PA2 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000008) != 0 # define AVR32_IRQ_GPIO_PA3 __IRQ_GPIO_PA3 # define __IRQ_GPIO_PA4 (__IRQ_GPIO_PA3+1) #else # define __IRQ_GPIO_PA4 __IRQ_GPIO_PA3 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000010) != 0 # define AVR32_IRQ_GPIO_PA4 __IRQ_GPIO_PA4 # define __IRQ_GPIO_PA5 (__IRQ_GPIO_PA4+1) #else # define __IRQ_GPIO_PA5 __IRQ_GPIO_PA4 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000020) != 0 # define AVR32_IRQ_GPIO_PA5 __IRQ_GPIO_PA5 # define __IRQ_GPIO_PA6 (__IRQ_GPIO_PA5+1) #else # define __IRQ_GPIO_PA6 __IRQ_GPIO_PA5 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000040) != 0 # define AVR32_IRQ_GPIO_PA6 __IRQ_GPIO_PA6 # define __IRQ_GPIO_PA7 (__IRQ_GPIO_PA6+1) #else # define __IRQ_GPIO_PA7 __IRQ_GPIO_PA6 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000080) != 0 # define AVR32_IRQ_GPIO_PA7 __IRQ_GPIO_PA7 # define __IRQ_GPIO_PA8 (__IRQ_GPIO_PA7+1) #else # define __IRQ_GPIO_PA8 __IRQ_GPIO_PA7 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000100) != 0 # define AVR32_IRQ_GPIO_PA8 __IRQ_GPIO_PA8 # define __IRQ_GPIO_PA9 (__IRQ_GPIO_PA8+1) #else # define __IRQ_GPIO_PA9 __IRQ_GPIO_PA8 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000200) != 0 # define AVR32_IRQ_GPIO_PA9 __IRQ_GPIO_PA9 # define __IRQ_GPIO_PA10 (__IRQ_GPIO_PA9+1) #else # define __IRQ_GPIO_PA10 __IRQ_GPIO_PA9 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000400) != 0 # define AVR32_IRQ_GPIO_PA10 __IRQ_GPIO_PA10 # define __IRQ_GPIO_PA11 (__IRQ_GPIO_PA10+1) #else # define __IRQ_GPIO_PA11 __IRQ_GPIO_PA10 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00000800) != 0 # define AVR32_IRQ_GPIO_PA11 __IRQ_GPIO_PA11 # define __IRQ_GPIO_PA12 (__IRQ_GPIO_PA11+1) #else # define __IRQ_GPIO_PA12 __IRQ_GPIO_PA11 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00001000) != 0 # define AVR32_IRQ_GPIO_PA12 __IRQ_GPIO_PA12 # define __IRQ_GPIO_PA13 (__IRQ_GPIO_PA12+1) #else # define __IRQ_GPIO_PA13 __IRQ_GPIO_PA12 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00002000) != 0 # define AVR32_IRQ_GPIO_PA13 __IRQ_GPIO_PA13 # define __IRQ_GPIO_PA14 (__IRQ_GPIO_PA13+1) #else # define __IRQ_GPIO_PA14 __IRQ_GPIO_PA13 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00004000) != 0 # define AVR32_IRQ_GPIO_PA14 __IRQ_GPIO_PA14 # define __IRQ_GPIO_PA15 (__IRQ_GPIO_PA14+1) #else # define __IRQ_GPIO_PA15 __IRQ_GPIO_PA14 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00008000) != 0 # define AVR32_IRQ_GPIO_PA15 __IRQ_GPIO_PA15 # define __IRQ_GPIO_PA16 (__IRQ_GPIO_PA15+1) #else # define __IRQ_GPIO_PA16 __IRQ_GPIO_PA15 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00010000) != 0 # define AVR32_IRQ_GPIO_PA16 __IRQ_GPIO_PA16 # define __IRQ_GPIO_PA17 (__IRQ_GPIO_PA16+1) #else # define __IRQ_GPIO_PA17 __IRQ_GPIO_PA16 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00020000) != 0 # define AVR32_IRQ_GPIO_PA17 __IRQ_GPIO_PA17 # define __IRQ_GPIO_PA18 (__IRQ_GPIO_PA17+1) #else # define __IRQ_GPIO_PA18 __IRQ_GPIO_PA17 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00040000) != 0 # define AVR32_IRQ_GPIO_PA18 __IRQ_GPIO_PA18 # define __IRQ_GPIO_PA19 (__IRQ_GPIO_PA18+1) #else # define __IRQ_GPIO_PA19 __IRQ_GPIO_PA18 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00080000) != 0 # define AVR32_IRQ_GPIO_PA19 __IRQ_GPIO_PA19 # define __IRQ_GPIO_PA20 (__IRQ_GPIO_PA19+1) #else # define __IRQ_GPIO_PA20 __IRQ_GPIO_PA19 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00100000) != 0 # define AVR32_IRQ_GPIO_PA20 __IRQ_GPIO_PA20 # define __IRQ_GPIO_PA21 (__IRQ_GPIO_PA20+1) #else # define __IRQ_GPIO_PA21 __IRQ_GPIO_PA20 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00200000) != 0 # define AVR32_IRQ_GPIO_PA21 __IRQ_GPIO_PA21 # define __IRQ_GPIO_PA22 (__IRQ_GPIO_PA21+1) #else # define __IRQ_GPIO_PA22 __IRQ_GPIO_PA21 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00400000) != 0 # define AVR32_IRQ_GPIO_PA22 __IRQ_GPIO_PA22 # define __IRQ_GPIO_PA23 (__IRQ_GPIO_PA22+1) #else # define __IRQ_GPIO_PA23 __IRQ_GPIO_PA22 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x00800000) != 0 # define AVR32_IRQ_GPIO_PA23 __IRQ_GPIO_PA23 # define __IRQ_GPIO_PA24 (__IRQ_GPIO_PA23+1) #else # define __IRQ_GPIO_PA24 __IRQ_GPIO_PA23 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x01000000) != 0 # define AVR32_IRQ_GPIO_PA24 __IRQ_GPIO_PA24 # define __IRQ_GPIO_PA25 (__IRQ_GPIO_PA24+1) #else # define __IRQ_GPIO_PA25 __IRQ_GPIO_PA24 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x02000000) != 0 # define AVR32_IRQ_GPIO_PA25 __IRQ_GPIO_PA25 # define __IRQ_GPIO_PA26 (__IRQ_GPIO_PA25+1) #else # define __IRQ_GPIO_PA26 __IRQ_GPIO_PA25 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x04000000) != 0 # define AVR32_IRQ_GPIO_PA26 __IRQ_GPIO_PA26 # define __IRQ_GPIO_PA27 (__IRQ_GPIO_PA26+1) #else # define __IRQ_GPIO_PA27 __IRQ_GPIO_PA26 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x08000000) != 0 # define AVR32_IRQ_GPIO_PA27 __IRQ_GPIO_PA27 # define __IRQ_GPIO_PA28 (__IRQ_GPIO_PA27+1) #else # define __IRQ_GPIO_PA28 __IRQ_GPIO_PA27 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x10000000) != 0 # define AVR32_IRQ_GPIO_PA28 __IRQ_GPIO_PA28 # define __IRQ_GPIO_PA29 (__IRQ_GPIO_PA28+1) #else # define __IRQ_GPIO_PA29 __IRQ_GPIO_PA28 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x20000000) != 0 # define AVR32_IRQ_GPIO_PA29 __IRQ_GPIO_PA29 # define __IRQ_GPIO_PA30 (__IRQ_GPIO_PA29+1) #else # define __IRQ_GPIO_PA30 __IRQ_GPIO_PA29 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x40000000) != 0 # define AVR32_IRQ_GPIO_PA30 __IRQ_GPIO_PA30 # define __IRQ_GPIO_PA31 (__IRQ_GPIO_PA30+1) #else # define __IRQ_GPIO_PA31 __IRQ_GPIO_PA30 #endif #if (CONFIG_AVR32_GPIOIRQSETA & 0x80000000) != 0 # define AVR32_IRQ_GPIO_PA31 __IRQ_GPIO_PA31 # define __IRQ_GPIO_PB0 (__IRQ_GPIO_PA31+1) #else # define __IRQ_GPIO_PB0 __IRQ_GPIO_PA31 #endif /* Up to 12 GPIO interrupts in PORTB0-11 */ #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000001) != 0 # define AVR32_IRQ_GPIO_PB0 __IRQ_GPIO_pb0 # define __IRQ_GPIO_PB1 (__IRQ_GPIO_PB0+1) #else # define __IRQ_GPIO_PB1 __IRQ_GPIO_PB0 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000002) != 0 # define AVR32_IRQ_GPIO_PB1 __IRQ_GPIO_PB1 # define __IRQ_GPIO_PB2 (__IRQ_GPIO_PB1+1) #else # define __IRQ_GPIO_PB2 __IRQ_GPIO_PB1 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000004) != 0 # define AVR32_IRQ_GPIO_PB2 __IRQ_GPIO_PB2 # define __IRQ_GPIO_PB3 (__IRQ_GPIO_PB2+1) #else # define __IRQ_GPIO_PB3 __IRQ_GPIO_PB2 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000008) != 0 # define AVR32_IRQ_GPIO_PB3 __IRQ_GPIO_PB3 # define __IRQ_GPIO_PB4 (__IRQ_GPIO_PB3+1) #else # define __IRQ_GPIO_PB4 __IRQ_GPIO_PB3 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000010) != 0 # define AVR32_IRQ_GPIO_PB4 __IRQ_GPIO_PB4 # define __IRQ_GPIO_PB5 (__IRQ_GPIO_PB4+1) #else # define __IRQ_GPIO_PB5 __IRQ_GPIO_PB4 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000020) != 0 # define AVR32_IRQ_GPIO_PB5 __IRQ_GPIO_PB5 # define __IRQ_GPIO_PB6 (__IRQ_GPIO_PB5+1) #else # define __IRQ_GPIO_PB6 __IRQ_GPIO_PB5 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000040) != 0 # define AVR32_IRQ_GPIO_PB6 __IRQ_GPIO_PB6 # define __IRQ_GPIO_PB7 (__IRQ_GPIO_PB6+1) #else # define __IRQ_GPIO_PB7 __IRQ_GPIO_PB6 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000080) != 0 # define AVR32_IRQ_GPIO_PB7 __IRQ_GPIO_PB7 # define __IRQ_GPIO_PB8 (__IRQ_GPIO_PB7+1) #else # define __IRQ_GPIO_PB8 __IRQ_GPIO_PB7 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000100) != 0 # define AVR32_IRQ_GPIO_PB8 __IRQ_GPIO_PB8 # define __IRQ_GPIO_PB9 (__IRQ_GPIO_PB8+1) #else # define __IRQ_GPIO_PB9 __IRQ_GPIO_PB8 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000200) != 0 # define AVR32_IRQ_GPIO_PB9 __IRQ_GPIO_PB9 # define __IRQ_GPIO_PB10 (__IRQ_GPIO_PB9+1) #else # define __IRQ_GPIO_PB10 __IRQ_GPIO_PB9 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000400) != 0 # define AVR32_IRQ_GPIO_PB10 __IRQ_GPIO_PB10 # define __IRQ_GPIO_PB11 (__IRQ_GPIO_PB10+1) #else # define __IRQ_GPIO_PB11 __IRQ_GPIO_PB10 #endif #if (CONFIG_AVR32_GPIOIRQSETB & 0x00000800) != 0 # define AVR32_IRQ_GPIO_PB11 __IRQ_GPIO_PB11 # define __IRQ_GPIO_PB12 (__IRQ_GPIO_PB11+1) #else # define __IRQ_GPIO_PB12 __IRQ_GPIO_PB11 #endif #ifdef CONFIG_AVR32_GPIOIRQ # define NR_GPIO_IRQS __IRQ_GPIO_PB12 #else # define NR_GPIO_IRQS 0 #endif /**************************************************************************** * Public Types ****************************************************************************/ /**************************************************************************** * Inline functions ****************************************************************************/ /**************************************************************************** * Public Data ****************************************************************************/ /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #ifndef __ASSEMBLY__ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif #undef EXTERN #ifdef __cplusplus } #endif #endif #endif /* __ARCH_AVR_INCLUDE_AT32UC3_IRQ_H */