/**************************************************************************** * drivers/input/ads7843e.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /* References: * "Touch Screen Controller, ADS7843," Burr-Brown Products from Texas * Instruments, SBAS090B, September 2000, Revised May 2002" * * See also: * "Low Voltage I/O Touch Screen Controller, TSC2046," Burr-Brown Products * from Texas Instruments, SBAS265F, October 2002, Revised August 2007." * * "XPT2046 Data Sheet," Shenzhen XPTek Technology Co., Ltd, 2007 */ #ifndef __DRIVERS_INPUT_ADS7843E_H #define __DRIVERS_INPUT_ADS7843E_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* Reference counting is partially implemented, but not needed in the current * design. */ #undef CONFIG_ADS7843E_REFCNT /* ADS7843E Interfaces ******************************************************/ /* ADS7843E command bit settings */ #define ADS7843E_CMD_PD0 (1 << 0) /* Bit 0: Power down mode select bit 0 */ #define ADS7843E_CMD_PD1 (1 << 1) /* Bit 1: Power down mode select bit 1 */ #define ADS7843E_CMD_SER (1 << 2) /* Bit 2: SER/DFR\: 0:DFR 1:SER */ #define ADS7843E_CMD_MODE8 (1 << 3) /* Bit 3: Mode 1:8-bits 0:12-bits */ #define ADS7843E_CMD_CHAN_SHIFT (4) /* Bits 4-6: Channel select bits */ #define ADS7843E_CMD_CHAN_MASK (7 << ADS7843E_CMD_CHAN_SHIFT) #define ADS7843E_CMD_START (1 << 7) /* Bit 7: Start Bit */ /* ADS7843E Commands */ #define ADS7843_CMD_YPOSITION \ ((1 << ADS7843E_CMD_CHAN_SHIFT)| ADS7843E_CMD_START | ADS7843E_CMD_PD0 | ADS7843E_CMD_PD1) #define ADS7843_CMD_XPOSITION \ ((5 << ADS7843E_CMD_CHAN_SHIFT)| ADS7843E_CMD_START | ADS7843E_CMD_PD0 | ADS7843E_CMD_PD1) #define ADS7843_CMD_ENABPENIRQ \ ((1 << ADS7843E_CMD_CHAN_SHIFT)| ADS7843E_CMD_START) /* Driver support ***********************************************************/ /* This format is used to construct the /dev/input[n] device driver path. It * defined here so that it will be used consistently in all places. */ #define DEV_FORMAT "/dev/input%d" #define DEV_NAMELEN 16 /* Poll the pen position while the pen is down at this rate (50MS): */ #define ADS7843E_WDOG_DELAY MSEC2TICK(50) /**************************************************************************** * Public Types ****************************************************************************/ /* This describes the state of one contact */ enum ads7843e_contact_e { CONTACT_NONE = 0, /* No contact */ CONTACT_DOWN, /* First contact */ CONTACT_MOVE, /* Same contact, possibly different position */ CONTACT_UP, /* Contact lost */ }; /* This structure describes the results of one ADS7843E sample */ struct ads7843e_sample_s { uint8_t id; /* Sampled touch point ID */ uint8_t contact; /* Contact state (see enum ads7843e_contact_e) */ bool valid; /* True: x,y contain valid, sampled data */ uint16_t x; /* Measured X position */ uint16_t y; /* Measured Y position */ }; /* This structure describes the state of one ADS7843E driver instance */ struct ads7843e_dev_s { #ifdef CONFIG_ADS7843E_MULTIPLE FAR struct ads7843e_dev_s *flink; /* Supports a singly linked list of drivers */ #endif #ifdef CONFIG_ADS7843E_REFCNT uint8_t crefs; /* Number of times the device has been opened */ #endif uint8_t nwaiters; /* Number of threads waiting for ADS7843E data */ uint8_t id; /* Current touch point ID */ volatile bool penchange; /* An unreported event is buffered */ uint16_t threshx; /* Thresholding X value */ uint16_t threshy; /* Thresholding Y value */ sem_t devsem; /* Manages exclusive access to this structure */ sem_t waitsem; /* Used to wait for the availability of data */ FAR struct ads7843e_config_s *config; /* Board configuration data */ FAR struct spi_dev_s *spi; /* Saved SPI driver instance */ struct work_s work; /* Supports the interrupt handling "bottom half" */ struct ads7843e_sample_s sample; /* Last sampled touch point data */ struct wdog_s wdog; /* Poll the position while the pen is down */ /* The following is a list if poll structures of threads waiting for * driver events. The 'struct pollfd' reference for each open is also * retained in the f_priv field of the 'struct file'. */ struct pollfd *fds[CONFIG_ADS7843E_NPOLLWAITERS]; }; /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif #undef EXTERN #ifdef __cplusplus } #endif #endif /* __DRIVERS_INPUT_ADS7843E_H */