#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#

if ARCH_BOARD_MIKROE_STM32F4

config MIKROE_FLASH
	bool "MTD driver for onboard 1M FLASH"
	default n
	select MTD
	select MTD_M25P
	select MTD_SMART
	select FS_SMARTFS
	select STM32_SPI3
	select MTD_BYTE_WRITE
	---help---
		Configures an MTD device for use with the onboard flash

config MIKROE_FLASH_MINOR
	int "Minor number for the FLASH /dev/smart entry"
	default 0
	depends on MIKROE_FLASH
	---help---
		Sets the minor number for the FLASH MTD /dev entry

config MIKROE_FLASH_PART
	bool "Enable partition support on FLASH"
	default n
	depends on MIKROE_FLASH
	---help---
		Enables creation of partitions on the FLASH

config MIKROE_FLASH_CONFIG_PART
	bool "Create application config data partition on FLASH"
	default y
	depends on MIKROE_FLASH_PART
	depends on PLATFORM_CONFIGDATA
	---help---
		Enables creation of a /dev/config partition on the FLASH

config MIKROE_FLASH_CONFIG_PART_NUMBER
	int "Index number of config partition (in list below)"
	default 0
	depends on MIKROE_FLASH_CONFIG_PART
	---help---
		Specifies the index number of the config data partition
		from the partition list.

config MIKROE_FLASH_PART_LIST
	string "Flash partition size list"
	default "8,248,768"
	depends on MIKROE_FLASH_PART
	---help---
		Comma separated list of partition sizes in KB.

config MIKROE_RAMMTD
	bool "MTD driver for SMARTFS RAM disk"
	default n
	select MTD
	select RAMMTD
	---help---
		Configures an MTD based RAM device for use with SMARTFS.

config MIKROE_RAMMTD_MINOR
	int "Minor number for RAM /dev/smart entry"
	default 1
	depends on MIKROE_RAMMTD
	---help---
		Sets the minor number for the RAM MTD /dev entry

config MIKROE_RAMMTD_SIZE
	int "Size in KB of the RAM device to create"
	default 32
	depends on MIKROE_RAMMTD
	---help---
		Sets the size of static RAM allocation for the SMART RAM device

config PM_ALARM_SEC
	int "PM_STANDBY delay (seconds)"
	default 15
	depends on PM && RTC_ALARM
	---help---
		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode.

config PM_ALARM_NSEC
	int "PM_STANDBY delay (nanoseconds)"
	default 0
	depends on PM && RTC_ALARM
	---help---
		Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode.

config PM_SLEEP_WAKEUP
	bool "PM_SLEEP wake-up alarm"
	default n
	depends on PM && RTC_ALARM
	---help---
		Wake-up of PM_SLEEP mode after a delay and resume normal operation.

config PM_SLEEP_WAKEUP_SEC
	int "PM_SLEEP delay (seconds)"
	default 10
	depends on PM && RTC_ALARM
	---help---
		Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode.

config PM_SLEEP_WAKEUP_NSEC
	int "PM_SLEEP delay (nanoseconds)"
	default 0
	depends on PM && RTC_ALARM
	---help---
		Number of additional nanoseconds to wait in PM_SLEEP before going to PM_STANDBY mode.

endif