/**************************************************************************** * fs/vfs/fs_poll.c * * Copyright (C) 2008-2009, 2012-2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "inode/inode.h" #ifndef CONFIG_DISABLE_POLL /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define poll_semgive(sem) nxsem_post(sem) /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: poll_semtake ****************************************************************************/ static int poll_semtake(FAR sem_t *sem) { int ret; /* Take the semaphore (perhaps waiting) */ ret = nxsem_wait(sem); /* The only case that an error should occur here is if the wait were * awakened by a signal. */ DEBUGASSERT(ret == OK || ret == -EINTR); return ret; } /**************************************************************************** * Name: poll_fdsetup * * Description: * Configure (or unconfigure) one file/socket descriptor for the poll * operation. If fds and sem are non-null, then the poll is being setup. * if fds and sem are NULL, then the poll is being torn down. * ****************************************************************************/ #if CONFIG_NFILE_DESCRIPTORS > 0 static int poll_fdsetup(int fd, FAR struct pollfd *fds, bool setup) { /* Check for a valid file descriptor */ if ((unsigned int)fd >= CONFIG_NFILE_DESCRIPTORS) { /* Perform the socket ioctl */ #if defined(CONFIG_NET) && CONFIG_NSOCKET_DESCRIPTORS > 0 if ((unsigned int)fd < (CONFIG_NFILE_DESCRIPTORS+CONFIG_NSOCKET_DESCRIPTORS)) { return net_poll(fd, fds, setup); } else #endif { return -EBADF; } } return fdesc_poll(fd, fds, setup); } #endif /**************************************************************************** * Name: poll_setup * * Description: * Setup the poll operation for each descriptor in the list. * ****************************************************************************/ #if CONFIG_NFILE_DESCRIPTORS > 0 static inline int poll_setup(FAR struct pollfd *fds, nfds_t nfds, sem_t *sem) { unsigned int i; unsigned int j; int ret = OK; /* Process each descriptor in the list */ for (i = 0; i < nfds; i++) { /* Setup the poll descriptor */ fds[i].sem = sem; fds[i].revents = 0; fds[i].priv = NULL; /* Check for invalid descriptors. "If the value of fd is less than 0, * events shall be ignored, and revents shall be set to 0 in that entry * on return from poll()." * * NOTE: There is a potential problem here. If there is only one fd * and if it is negative, then poll will hang. From my reading of the * spec, that appears to be the correct behavior. */ switch (fds[i].events & POLLMASK) { case POLLFD: if (fds[i].fd >= 0) { ret = poll_fdsetup(fds[i].fd, &fds[i], true); } break; case POLLFILE: if (fds[i].ptr != NULL) { ret = file_poll(fds[i].ptr, &fds[i], true); } break; #ifdef CONFIG_NET case POLLSOCK: if (fds[i].ptr != NULL) { ret = psock_poll(fds[i].ptr, &fds[i], true); } break; #endif default: ret = -EINVAL; break; } if (ret < 0) { /* Setup failed for fds[i]. We now need to teardown previously * setup fds[0 .. (i - 1)] to release allocated resources and * to prevent memory corruption by access to freed/released 'fds' * and 'sem'. */ for (j = 0; j < i; j++) { switch (fds[j].events & POLLMASK) { case POLLFD: (void)poll_fdsetup(fds[j].fd, &fds[j], false); break; case POLLFILE: (void)file_poll(fds[j].ptr, &fds[j], false); break; #ifdef CONFIG_NET case POLLSOCK: (void)psock_poll(fds[j].ptr, &fds[j], false); break; #endif default: break; } } /* Indicate an error on the file descriptor */ fds[i].revents |= POLLERR; return ret; } } return OK; } #endif /**************************************************************************** * Name: poll_teardown * * Description: * Teardown the poll operation for each descriptor in the list and return * the count of non-zero poll events. * ****************************************************************************/ #if CONFIG_NFILE_DESCRIPTORS > 0 static inline int poll_teardown(FAR struct pollfd *fds, nfds_t nfds, int *count, int ret) { unsigned int i; int status = OK; /* Process each descriptor in the list */ *count = 0; for (i = 0; i < nfds; i++) { switch (fds[i].events & POLLMASK) { case POLLFD: if (fds[i].fd >= 0) { status = poll_fdsetup(fds[i].fd, &fds[i], false); } break; case POLLFILE: if (fds[i].ptr != NULL) { status = file_poll(fds[i].ptr, &fds[i], false); } break; #ifdef CONFIG_NET case POLLSOCK: if (fds[i].ptr != NULL) { status = psock_poll(fds[i].ptr, &fds[i], false); } break; #endif default: status = -EINVAL; break; } if (status < 0) { ret = status; } /* Check if any events were posted */ if (fds[i].revents != 0) { (*count)++; } /* Un-initialize the poll structure */ fds[i].sem = NULL; } return ret; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: file_poll * * Description: * Low-level poll operation based on struct file. This is used both to (1) * support detached file, and also (2) by fdesc_poll() to perform all * normal operations on file descriptors descriptors. * * Input Parameters: * file File structure instance * fds - The structure describing the events to be monitored, OR NULL if * this is a request to stop monitoring events. * setup - true: Setup up the poll; false: Teardown the poll * * Returned Value: * 0: Success; Negated errno on failure * ****************************************************************************/ #if CONFIG_NFILE_DESCRIPTORS > 0 int file_poll(FAR struct file *filep, FAR struct pollfd *fds, bool setup) { FAR struct inode *inode; int ret = -ENOSYS; DEBUGASSERT(filep != NULL && filep->f_inode != NULL); inode = filep->f_inode; if (inode != NULL) { /* Is a driver registered? Does it support the poll method? * If not, return -ENOSYS */ if (INODE_IS_DRIVER(inode) && inode->u.i_ops != NULL && inode->u.i_ops->poll != NULL) { /* Yes, it does... Setup the poll */ ret = (int)inode->u.i_ops->poll(filep, fds, setup); } /* Regular files (and block devices) are always readable and * writable. Open Group: "Regular files shall always poll TRUE for * reading and writing." */ if (INODE_IS_MOUNTPT(inode) || INODE_IS_BLOCK(inode)) { if (setup) { fds->revents |= (fds->events & (POLLIN | POLLOUT)); if (fds->revents != 0) { nxsem_post(fds->sem); } } ret = OK; } } return ret; } #endif /**************************************************************************** * Name: fdesc_poll * * Description: * The standard poll() operation redirects operations on file descriptors * to this function. * * Input Parameters: * fd - The file descriptor of interest * fds - The structure describing the events to be monitored, OR NULL if * this is a request to stop monitoring events. * setup - true: Setup up the poll; false: Teardown the poll * * Returned Value: * Zero (OK) is returned on success; a negated errno value is returned on * any failure. * ****************************************************************************/ #if CONFIG_NFILE_DESCRIPTORS > 0 int fdesc_poll(int fd, FAR struct pollfd *fds, bool setup) { FAR struct file *filep; int ret; /* Get the file pointer corresponding to this file descriptor */ ret = fs_getfilep(fd, &filep); if (ret < 0) { return ret; } DEBUGASSERT(filep != NULL); /* Let file_poll() do the rest */ return file_poll(filep, fds, setup); } #endif /**************************************************************************** * Name: poll * * Description: * poll() waits for one of a set of file descriptors to become ready to * perform I/O. If none of the events requested (and no error) has * occurred for any of the file descriptors, then poll() blocks until * one of the events occurs. * * Input Parameters: * fds - List of structures describing file descriptors to be monitored * nfds - The number of entries in the list * timeout - Specifies an upper limit on the time for which poll() will * block in milliseconds. A negative value of timeout means an infinite * timeout. * * Returned Value: * On success, the number of structures that have non-zero revents fields. * A value of 0 indicates that the call timed out and no file descriptors * were ready. On error, -1 is returned, and errno is set appropriately: * * EBADF - An invalid file descriptor was given in one of the sets. * EFAULT - The fds address is invalid * EINTR - A signal occurred before any requested event. * EINVAL - The nfds value exceeds a system limit. * ENOMEM - There was no space to allocate internal data structures. * ENOSYS - One or more of the drivers supporting the file descriptor * does not support the poll method. * ****************************************************************************/ int poll(FAR struct pollfd *fds, nfds_t nfds, int timeout) { sem_t sem; int count = 0; int errcode; int ret; /* poll() is a cancellation point */ (void)enter_cancellation_point(); /* This semaphore is used for signaling and, hence, should not have * priority inheritance enabled. */ nxsem_init(&sem, 0, 0); nxsem_setprotocol(&sem, SEM_PRIO_NONE); ret = poll_setup(fds, nfds, &sem); if (ret >= 0) { if (timeout == 0) { /* Poll returns immediately whether we have a poll event or not. */ ret = OK; } else if (timeout > 0) { clock_t ticks; /* "Implementations may place limitations on the granularity of * timeout intervals. If the requested timeout interval requires * a finer granularity than the implementation supports, the * actual timeout interval will be rounded up to the next * supported value." -- opengroup.org * * Round timeout up to next full tick. */ #if (MSEC_PER_TICK * USEC_PER_MSEC) != USEC_PER_TICK && \ defined(CONFIG_HAVE_LONG_LONG) ticks = (((unsigned long long)timeout * USEC_PER_MSEC) + (USEC_PER_TICK - 1)) / USEC_PER_TICK; #else ticks = ((unsigned int)timeout + (MSEC_PER_TICK - 1)) / MSEC_PER_TICK; #endif /* Either wait for either a poll event(s), for a signal to occur, * or for the specified timeout to elapse with no event. * * NOTE: If a poll event is pending (i.e., the semaphore has already * been incremented), nxsem_tickwait() will not wait, but will return * immediately. */ ret = nxsem_tickwait(&sem, clock_systimer(), ticks); if (ret < 0) { if (ret == -ETIMEDOUT) { /* Return zero (OK) in the event of a timeout */ ret = OK; } /* EINTR is the only other error expected in normal operation */ } } else { /* Wait for the poll event or signal with no timeout */ ret = poll_semtake(&sem); } /* Teardown the poll operation and get the count of events. Zero will be * returned in the case of a timeout. * * Preserve ret, if negative, since it holds the result of the wait. */ errcode = poll_teardown(fds, nfds, &count, ret); if (errcode < 0 && ret >= 0) { ret = errcode; } } nxsem_destroy(&sem); leave_cancellation_point(); /* Check for errors */ if (ret < 0) { set_errno(-ret); return ERROR; } return count; } #endif /* CONFIG_DISABLE_POLL */