/**************************************************************************** * binfmt/nxflat.c * * Copyright (C) 2009, 2019 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_NXFLAT /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* CONFIG_DEBUG_FEATURES, CONFIG_DEBUG_INFO, and CONFIG_DEBUG_BINFMT have to be * defined or CONFIG_NXFLAT_DUMPBUFFER does nothing. */ #if !defined(CONFIG_DEBUG_INFO) || !defined (CONFIG_DEBUG_BINFMT) # undef CONFIG_NXFLAT_DUMPBUFFER #endif #ifdef CONFIG_NXFLAT_DUMPBUFFER # define nxflat_dumpbuffer(m,b,n) binfodumpbuffer(m,b,n) #else # define nxflat_dumpbuffer(m,b,n) #endif #ifndef MIN # define MIN(a,b) (a < b ? a : b) #endif /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static int nxflat_loadbinary(FAR struct binary_s *binp); static int nxflat_unloadbinary(FAR struct binary_s *binp); #if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_BINFMT) static void nxflat_dumploadinfo(FAR struct nxflat_loadinfo_s *loadinfo); #endif /**************************************************************************** * Private Data ****************************************************************************/ static struct binfmt_s g_nxflatbinfmt = { NULL, /* next */ nxflat_loadbinary, /* load */ nxflat_unloadbinary, /* unload */ }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: nxflat_dumploadinfo ****************************************************************************/ #if defined(CONFIG_DEBUG_FEATURES) && defined(CONFIG_DEBUG_BINFMT) static void nxflat_dumploadinfo(FAR struct nxflat_loadinfo_s *loadinfo) { unsigned long dsize = loadinfo->datasize + loadinfo->bsssize; binfo("LOAD_INFO:\n"); binfo(" ISPACE:\n"); binfo(" ispace: %08lx\n", loadinfo->ispace); binfo(" entryoffs: %08lx\n", loadinfo->entryoffs); binfo(" isize: %08lx\n", loadinfo->isize); binfo(" DSPACE:\n"); binfo(" dspace: %08lx\n", loadinfo->dspace); if (loadinfo->dspace != NULL) { binfo(" crefs: %d\n", loadinfo->dspace->crefs); binfo(" region: %08lx\n", loadinfo->dspace->region); } binfo(" datasize: %08lx\n", loadinfo->datasize); binfo(" bsssize: %08lx\n", loadinfo->bsssize); binfo(" (pad): %08lx\n", loadinfo->dsize - dsize); binfo(" stacksize: %08lx\n", loadinfo->stacksize); binfo(" dsize: %08lx\n", loadinfo->dsize); binfo(" RELOCS:\n"); binfo(" relocstart: %08lx\n", loadinfo->relocstart); binfo(" reloccount: %d\n", loadinfo->reloccount); binfo(" HANDLES:\n"); binfo(" filfd: %d\n", loadinfo->filfd); } #else # define nxflat_dumploadinfo(i) #endif /**************************************************************************** * Name: nxflat_loadbinary * * Description: * Verify that the file is an NXFLAT binary and, if so, load the NXFLAT * binary into memory * ****************************************************************************/ static int nxflat_loadbinary(FAR struct binary_s *binp) { struct nxflat_loadinfo_s loadinfo; /* Contains globals for libnxflat */ int ret; binfo("Loading file: %s\n", binp->filename); /* Initialize the xflat library to load the program binary. */ ret = nxflat_init(binp->filename, &loadinfo); nxflat_dumploadinfo(&loadinfo); if (ret != 0) { berr("Failed to initialize for load of NXFLAT program: %d\n", ret); goto errout; } /* Load the program binary */ ret = nxflat_load(&loadinfo); nxflat_dumploadinfo(&loadinfo); if (ret != 0) { berr("Failed to load NXFLAT program binary: %d\n", ret); goto errout_with_init; } /* Bind the program to the exported symbol table */ ret = nxflat_bind(&loadinfo, binp->exports, binp->nexports); if (ret != 0) { berr("Failed to bind symbols program binary: %d\n", ret); goto errout_with_load; } /* Return the load information. By convention, D-space address * space is stored as the first allocated memory. */ binp->entrypt = (main_t)(loadinfo.ispace + loadinfo.entryoffs); binp->mapped = (FAR void *)loadinfo.ispace; binp->mapsize = loadinfo.isize; binp->stacksize = loadinfo.stacksize; /* Add the ELF allocation to the alloc[] only if there is no address * enironment. If there is an address environment, it will automatically * be freed when the function exits * * REVISIT: If the module is loaded then unloaded, wouldn't this cause * a memory leak? */ #ifdef CONFIG_ARCH_ADDRENV # warning "REVISIT" #else binp->alloc[0] = (FAR void *)loadinfo.dspace; #endif #ifdef CONFIG_ARCH_ADDRENV /* Save the address environment in the binfmt structure. This will be * needed when the module is executed. */ up_addrenv_clone(&loadinfo.addrenv, &binp->addrenv); #endif nxflat_dumpbuffer("Entry code", (FAR const uint8_t *)binp->entrypt, MIN(loadinfo.isize - loadinfo.entryoffs, 512)); nxflat_uninit(&loadinfo); return OK; errout_with_load: nxflat_unload(&loadinfo); errout_with_init: nxflat_uninit(&loadinfo); errout: return ret; } /**************************************************************************** * Name: nxflat_unloadbinary * * Description: * Verify that the file is an NXFLAT binary and, if so, load the NXFLAT * binary into memory * ****************************************************************************/ static int nxflat_unloadbinary(FAR struct binary_s *binp) { FAR struct dspace_s *dspace = (FAR struct dspace_s *)binp->alloc[0]; /* Check if this is the last reference to dspace. It may still be needed * by other threads. In that case, it must persist after this thread * terminates. */ if (dspace != NULL && dspace->crefs == 1) { /* Free the dspace region */ kumm_free(dspace->region); dspace->region = NULL; /* Mark alloc[0] (dspace) as freed */ binp->alloc[0] = NULL; /* The reference count will be decremented to zero and the dspace * container will be freed in sched/sched_releasetcb.c */ } return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxflat_initialize * * Description: * In order to use the NxFLAT binary format, this function must be called * during system initialization to register the NXFLAT binary * format. * * Returned Value: * This is a NuttX internal function so it follows the convention that * 0 (OK) is returned on success and a negated errno is returned on * failure. * ****************************************************************************/ int nxflat_initialize(void) { int ret; /* Register ourselves as a binfmt loader */ binfo("Registering NXFLAT\n"); ret = register_binfmt(&g_nxflatbinfmt); if (ret != 0) { berr("Failed to register binfmt: %d\n", ret); } return ret; } /**************************************************************************** * Name: nxflat_uninitialize * * Description: * Unregister the NXFLAT binary loader * * Returned Value: * None * ****************************************************************************/ void nxflat_uninitialize(void) { (void)unregister_binfmt(&g_nxflatbinfmt); } #endif /* CONFIG_NXFLAT */