/**************************************************************************** * drivers/leds/pca9635pw.c * * Copyright (C) 2015 DS-Automotion GmbH. All rights reserved. * Author: Alexander Entinger * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #if defined(CONFIG_I2C) && defined(CONFIG_PCA9635PW) /**************************************************************************** * Private Type Definitions ****************************************************************************/ struct pca9635pw_dev_s { FAR struct i2c_master_s *i2c; uint8_t i2c_addr; }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static int pca9635pw_i2c_write_byte(FAR struct pca9635pw_dev_s *priv, uint8_t const reg_addr, uint8_t const reg_val); static int pca9635pw_set_led_mode(FAR struct pca9635pw_dev_s *priv, uint8_t const led_out_x_mode); static int pca9635pw_open(FAR struct file *filep); static int pca9635pw_close(FAR struct file *filep); static int pca9635pw_ioctl(FAR struct file *filep, int cmd, unsigned long arg); /**************************************************************************** * Private Data ****************************************************************************/ static const struct file_operations g_pca9635pw_fileops = { pca9635pw_open, /* open */ pca9635pw_close, /* close */ 0, /* read */ 0, /* write */ 0, /* seek */ pca9635pw_ioctl, /* ioctl */ 0 /* poll */ }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: pca9635pw_i2c_write_byte * * Description: * Write a single byte to one of the PCA9635PW configuration registers. * ****************************************************************************/ static int pca9635pw_i2c_write_byte(FAR struct pca9635pw_dev_s *priv, uint8_t const reg_addr, uint8_t const reg_val) { struct i2c_config_s config; /* assemble the 2 byte message comprised of reg_addr and reg_val */ uint8_t const BUFFER_SIZE = 2; uint8_t buffer[BUFFER_SIZE]; buffer[0] = reg_addr; buffer[1] = reg_val; /* Setup up the I2C configuration */ config.frequency = I2C_BUS_FREQ_HZ; config.address = priv->i2c_addr; config.addrlen = 7; /* Write the register address followed by the data (no RESTART) */ lcdinfo("i2c addr: 0x%02X reg addr: 0x%02X value: 0x%02X\n", priv->i2c_addr, buffer[0], buffer[1]); ret = i2c_write(priv->i2c, &config, buffer, BUFFER_SIZE); if (ret != OK) { lcderr("ERROR: i2c_write returned error code %d\n", ret); return ret; } return OK; } /**************************************************************************** * Name: pca9635pw_set_led_mode * * Description: * Set the led output mode (see PCA9635PW_LED_OUT_x register value definitions) * ****************************************************************************/ static int pca9635pw_set_led_mode(FAR struct pca9635pw_dev_s *priv, uint8_t const led_out_x_mode) { uint8_t current_ledout_reg = PCA9635PW_LED_OUT_0; for (; current_ledout_reg <= PCA9635PW_LED_OUT_3; current_ledout_reg++) { int const ret = pca9635pw_i2c_write_byte(priv, current_ledout_reg, led_out_x_mode); if (ret != OK) { return ret; } } return OK; } /**************************************************************************** * Name: pca9635pw_open * * Description: * This function is called whenever a PCA9635PW device is opened. * ****************************************************************************/ static int pca9635pw_open(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct pca9635pw_dev_s *priv = inode->i_private; int ret = -1; /* Wake up the PCA9635PW (sleep bit PCA9635PW_MODE_1_SLEEP is set to zero * and enable register auto increment - this way we can write to multiple * consecutive I2C registers without having to always write first the * address and then the data byte. */ uint8_t const PCA9635PW_MODE_1_INITIAL_VALUE = PCA9635PW_MODE_1_AI2; ret = pca9635pw_i2c_write_byte(priv, PCA9635PW_MODE_1, PCA9635PW_MODE_1_INITIAL_VALUE); if (ret != OK) { lcderr("ERROR: Could not set initial config for PCA9635PW_MODE_1\n"); return ret; } /* Configure the PCA9635PW output drivers for totem-pole structure since * the output of the PCA9635PW are coupled with the Gates of MOSFET's * which then drive the LED's. Since we have this kind of schematic * structure we also need to invert the output. */ uint8_t const PCA9635PW_MODE_2_INITIAL_VALUE = PCA9635PW_MODE_2_INVRT | PCA9635PW_MODE_2_OUTDRV; ret = pca9635pw_i2c_write_byte(priv, PCA9635PW_MODE_2, PCA9635PW_MODE_2_INITIAL_VALUE); if (ret != OK) { lcderr("ERROR: Could not set initial config for PCA9635PW_MODE_2\n"); return ret; } /* A delay of 500 us is necessary since this is the maximum time which the * oscillator of the PCA9635PW needs to be up and running once sleep mode was * left. */ nxsig_usleep(500); /* Turn all led drivers to mode 2 in which the led brightness is controlled * by the indiviual pwm registers. */ ret = pca9635pw_set_led_mode(priv, PCA9635PW_LED_OUT_x_MODE_2); if (ret != OK) { lcderr("ERROR: Could not set led driver outputs to MODE2 (LED's brightness are " "controlled by pwm registers)\n"); return ret; } return OK; } /**************************************************************************** * Name: pca9635pw_close * * Description: * This function is called whenever a PCA9635PW device is closed. * ****************************************************************************/ static int pca9635pw_close(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct pca9635pw_dev_s *priv = inode->i_private; int ret = -1; /* Turn all led drivers off */ ret = pca9635pw_set_led_mode(priv, PCA9635PW_LED_OUT_x_MODE_0); if (ret != OK) { lcderr("ERROR: Could not set led driver outputs to MODE0 (LED's are off)\n"); return ret; } /* Send the PCA9635PW back to sleep mode */ uint8_t const PCA9635PW_MODE_1_FINAL_VALUE = PCA9635PW_MODE_1_SLEEP; ret =pca9635pw_i2c_write_byte(priv, PCA9635PW_MODE_1, PCA9635PW_MODE_1_FINAL_VALUE); if (ret != OK) { return ret; } return OK; } /**************************************************************************** * Name: pca9635pw_close * * Description: * This function is called whenever an ioctl call to a PCA9635PW is performed. * ****************************************************************************/ static int pca9635pw_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct pca9635pw_dev_s *priv = inode->i_private; int ret = OK; lcdinfo("cmd: %d arg: %ld\n", cmd, arg); switch (cmd) { /* Set the brightness of an indivual LED. Arg: pca9635pw_led_brightness_s * pointer. */ case PWMIOC_SETLED_BRIGHTNESS: { /* Retrieve the information handed over as argument for this ioctl */ FAR const struct pca9635pw_setled_brightness_arg_s *ptr = (FAR const struct pca9635pw_setled_brightness_arg_s *)((uintptr_t)arg); DEBUGASSERT(ptr != NULL); /* Set the brighntess of the led */ ret = pca9635pw_i2c_write_byte(priv, ptr->led, ptr->brightness); } break; /* The used ioctl command was invalid */ default: { lcderr("ERROR: Unrecognized cmd: %d\n", cmd); ret = -ENOTTY; } break; } return ret; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: pca9635pw_register * * Description: * Register the PCA9635PW device as 'devpath' * * Input Parameters: * devpath - The full path to the driver to register. E.g., "/dev/leddrv0". * i2c - An instance of the I2C interface to use to communicate * with the LM92. * pca9635pw_i2c_addr * - The I2C address of the PCA9635PW. * * Returned Value: * Zero (OK) on success; a negated errno value on failure. * ****************************************************************************/ int pca9635pw_register(FAR const char *devpath, FAR struct i2c_master_s *i2c, uint8_t const pca9635pw_i2c_addr) { /* Sanity check */ DEBUGASSERT(i2c != NULL); /* Initialize the PCA9635PW device structure */ FAR struct pca9635pw_dev_s *priv = (FAR struct pca9635pw_dev_s *)kmm_malloc(sizeof(struct pca9635pw_dev_s)); if (priv == NULL) { lcderr("ERROR: Failed to allocate instance of pca9635pw_dev_s\n"); return -ENOMEM; } priv->i2c = i2c; priv->i2c_addr = pca9635pw_i2c_addr; /* Register the character driver */ int const ret = register_driver(devpath, &g_pca9635pw_fileops, 666, priv); if (ret != OK) { lcderr("ERROR: Failed to register driver: %d\n", ret); kmm_free(priv); return ret; } return OK; } #endif /* CONFIG_I2C && CONFIG_I2C_PCA9635PW */